WoT Blitz. Tank TOG II* Sausage. British heavy tank TOG (I-II). British WWII Tanks Crew Training TOG II

Year of development: 1939
Production year: 1941
Combat weight: 81.2 tons
Length: 10075 mm
Width: 3100 mm
Height: 3050 mm
Speed: 12 km/h
Power reserve: 75 km
Radio: there is no data
Armor
a. Forehead: 25 – 50 mm mm
b. Board:: 25 – 50 mm mm
c. Stern: 25 – 50 mm mm
d. Cabin: 25 – 50 mm mm
e. Body: (top) 25 – 50 mm mm
f. Body: (bottom) 25 – 50 mm mm
g. Roof/Bottom: 25 – 50 mm mm
Crew: 6-8 people
Armament: 76 mm gun
Manufacturers: England

In July 1939, a discussion took place between the British Minister of Supply, who was responsible for the production of armaments, and Sir Albert Stern, who headed the Tank Supply Department during the First World War, about the requirements for tanks for combat operations in Europe. As a result, on September 5, 1939, Sir Albert was offered to work with specialists in developing requirements for the tank. In addition to him, Sir Y. Tennyson D "Encourt, General Swinton, Mr. Ricardo and Major Wilson were invited to the committee - they all played an outstanding role in the creation and production of tanks in the First world war. The committee decided to ask the General Staff to issue TTT for a heavy tank, and Stern invited Sir William Tritton of Foster's firm in Lincoln (the main tank manufacturer in 1916-18) to cooperate with the committee in these studies.

The General Staff invited the members of the committee to visit France to get acquainted with the new French tanks, as well as to meet with the officers of the headquarters of the British Expeditionary Force. In the meantime, tactical and technical requirements were issued, and in October 1939 the committee received the official name "Committee for the Development of a Special Vehicle of the Ministry of Supply." The requirements were similar to those issued by Harland & Wollf for the A20 infantry tank. They envisioned a hull-covered tracked vehicle to overcome cratered terrain, armored to protect against fire from 47mm and 37mm anti-tank guns and 105mm howitzers at a range of 100 yards. He had to carry field gun in the front of the hull to destroy the fortifications, in the sponsons it was required to install 40-mm cannons, 7.7-mm BESA machine guns with circular fire, have a cruising range of up to 50 miles, a speed of 5 miles / h and a diesel engine. The crew was supposed to be 8 people. The tank was to be transported by rail.

A preliminary design was prepared by Foster in December 1939. However, by that time there was still no suitable diesel engine, so they intended to use a Pacsman-Ricardo V-shaped 12-cylinder diesel engine with a capacity of 450 hp, which was planned to be boosted to 600 hp. Taking into account the mass of the machine, an electric transmission was provided, the development of which was proposed by the English Electric Company. The machine is known as TOG I (" The Old Gang" - "old team"), and its development began in February 1940. It appeared in October 1940. It had a speed of 8.5 mph and weighed about 50 tons without weapons or sponsors. By this time, the project had been changed, eliminated the sponsons, but introduced a turret for a 2-pounder gun from the A12 "Matilda" tank. A 75-mm howitzer was installed in the front hull plate in the same way as in the French Char B-1 tank. The undercarriage had a rigid suspension without elastic elements and generally resembled those used on late British tanks from the First World War. Tests showed that the electric transmission did not live up to the hopes of the designers, and the engine was burned during the tests. On TOG 1, the engine turned an electric generator that powered two onboard engines that turned the tracks. The steering wheel was connected to a potentiometer that changed the voltage on the onboard electric motors and the difference in the speed of rotation of the tracks led to the rotation of the machine. This well-conceived system turned out to be too complicated and led to deformations of the tracks and drive wheels. Therefore, TOG 1 was modified, a hydraulic transmission was installed, which also turned out to be unsuccessful due to the large inertia of the hydraulic pairs, which made control unreliable. In this new variant, the tank was designated TOG I A.

During the construction of TOG 1, an improved model was developed with a lowering of the upper branches of the caterpillars to reduce the height of the hull. Tank TOG 2, built in a single copy in March 1941, was intended to install an enlarged turret with a 57-mm gun and sponsons, as originally designed. However, the sponsors never installed it, and the turret installed for the first tests was a wooden mock-up with a dummy gun and was larger than the one provided for by the project. The real turret appeared for installation on the TOG 2R (Revised - "corrected") - the result of further development, which was 6 feet shorter than its predecessor due to the elimination of onboard sponsons and had a torsion bar suspension of the road wheels. The TOG 2R was never built, and the turret provided for it was made to replace the wooden model with the TOG 2. The mechanical components and assemblies of this tank were similar to the TOG 1.

While the TOG 2 was being tested, the A22 "Churchill" heavy infantry tank was accepted into service and put into production. Interest in the TOG faded, but in early 1942 a new turret with a 76 mm cannon was installed for testing purposes. TOG 2, now designated TOG 2*, was thus the first British tank with a 76 mm gun. After some changes, the turret and the Metadyne electric turn drive created for it were installed on the A30 "Challenger" tank.

9-07-2016, 19:58

Hello everyone and welcome to the site! Friends, today we have the strangest and most unique vehicle in the world of tanks, a slow, clumsy and very long tank - this is the TOG II guide.

This unit cannot be called new in any way, it has been in World of Tanks for a very long time and everyone knows that this is a premium tank of the sixth level in the UK. In addition to the fact that TOG 2 cannot be bought now and it has a preferential level of battles (6-7), there are many more interesting nuances here, which we’ll talk about now.

TTX TOG 2

The first thing I want to say and this is good news is that this unit is endowed with a very large safety margin for its level and good basic overview at 360 meters.

If we consider the rest of the general TOG 2 characteristics, then everything is very sad. Let's start with the fact that we have just incredibly shed dimensions. The car is tall and catastrophically long, besides, we have no armor, so everyone, starting from the sixth level, is able to break through this Briton in almost any projection.

Regarding mobility, the TOG 2 World of Tanks tank was also deprived of it. Incredibly low top speed, no dynamics, and a complete lack of maneuverability suggests that spinning us is easy.

In other words, in this vein, the advantage of this tank is only its safety margin, good visibility, and preferential combat level.

TOG II gun*

However, there can be no advantages at all, and the armament can rightfully be called the only plus of this machine, it is really excellent.

The main thing for which the TOG 2 gun is loved is its high armor penetration, that is, we don’t need gold shells at all, the machine is able to farm.

Further, we do not have a large alpha strike, a decent attack speed compensates for this moment, and as a result we get about 1800 damage per minute, without taking into account the rammer and crew skills, and this is a very good result.

Even the accuracy parameters of the TOG 2 tank are quite good. We were given a comfortable spread, fast time information and good stabilization (not surprising at this speed). By the way, the gun leans down by 10 degrees, which is another plus.

Advantages and disadvantages of TOG II*

Having considered General characteristics of this machine and the parameters of its guns, all strong and weak sides visible immediately to the naked eye. In fact, TOG II * World of Tanks has a lot of advantages, but those few disadvantages are so significant that they cannot be ignored.
Pros:
Excellent armor penetration;
High rate of fire and good DPM;
Good accuracy and timing;
Large margin of safety;
Comfortable vertical aiming angles;
Preferential level of battles;
Minuses:
Weak booking;
Huge dimensions;
Very poor mobility.

Equipment for TOG 2

Based on the fact that it is impossible to level our shortcomings by installing additional modules, it is worth concentrating on strengthening the existing advantages. Thus, TOG 2 equipment is selected according to the following principle:
1. - will increase the damage dealt per minute.
2. - increasing the viewing range is a very important nuance, so the choice is obvious.
3. - although we are reduced quite quickly, it will not be superfluous to improve this parameter.

As usual, there is a good alternative to the last point -. With this module, several characteristics will increase in a complex manner at once, so everything is logical.

Crew Training TOG II*

Another extremely important point for any tank is the choice of skills for the crew. This case is not quite standard, because we have as many as 6 crew members at our disposal, but do not get lost, on TOG 2 perks are selected as follows:
Commander - , , , .
Gunner - , , , .
Driver mechanic - , , , ;
Radio operator - , , , .
Loader - , , , .
Loader - , , , .

Equipment for TOG 2

In terms of consumables, everything is standard, quite successfully you can get by with a gentleman's set of, and. But if the issue with the supply of silver is not particularly acute and survivability and comfort in battle are important to you, it’s better to carry premium equipment on TOG 2, and the fire extinguisher can be replaced with PUDDING.

Tactics of the game on TOG 2

Given the specific aspects of this vehicle, namely: dimensions, slowness and weak armor, it is not easy to play on it. But do not forget about the numerous disadvantages, so the chances are still good.

On TOG 2, the combat tactics are more from playing on the second line, since we are unable to even tank our classmates. But the accurate, armor-piercing and rapid-fire gun works quite well at a distance.

It should also be understood that it is not worth fighting with a superior number of opponents, but TOG II * WoT tank we can easily shoot any classmate 1 on 1, taking advantage of the same advantage in the rate of fire and an increased margin of safety.

For the rest, the main thing is to understand that in our hands there is a car of one direction, choosing which you will not be able to go back, no matter how much you want. An important point is that artillery loves to focus us very much, the British TOG 2 heavy tank suffers incredibly from it and when choosing positions, this fact must be taken into account.

Of course, we feel most comfortable on city maps, because here it is easier to hide this long barn and it is more difficult to put arte on. But in any situation, you need to analyze the situation in battle, follow the mini-map and try not to be alone. Without the support of allies, the World of Tanks TOG 2 tank is very vulnerable, because it can be spinned.

TOG 1 maneuvers in the yard of Foster's Lincoln plant. An inclinometer is installed on board, which determines the angle of inclination.

In September 1939 the British General base initiated the development of a new promising tank A20. This event did not pass by Sir Albert Stern - a legendary man in British tank building. Previously, he was secretary of the World's First Committee of Land Ships, and largely thanks to his foresight and will, Britain began the world's first mass production of tanks in 1916. The authority of Sir Albert was extremely great, but, unfortunately, his conceit was even greater. He believed that he and only he knew what a successful new tank should be like. 6 weeks after the start of work on the A20, Albert Stern took the initiative to lead the creation of his own, the only correct project. To this end, he gathered around him his eminent like-minded people who participated with him in the creation of the first tank, which became his and their triumph. They were VGs. Wilson, Sir William Tritton, Harry Ricardo, Sir Ernst Swinton, Sir Eustace Tennyson D'Eincourt and others. Using his influence, he managed to enlist the support of the Cabinet of Ministers and formed the Special Vehicle Development Committee (SVDC). Given the illustrious composition of tank building veterans, this committee received the informal nickname of the Old Gang (The Old Gang).

It was said that the General Staff was not enthusiastic about Sir Arthur's creative impulse, and therefore some people had to be pressured to join the newly created Committee. Most of the participants, by that time, were already in old age, and retired. However, Ricardo and Wilson still continued their engineering research.

The old Gang, drawing on the experience of the First World War, was firmly convinced that the new tanks would eventually have to operate in the conditions of an advanced enemy trench system. In their opinion, the world tank building has clearly gone the wrong way, so their tank will return the lost to the true path. Naturally, the order was given to William Foster and Co., in Lincoln, which produced the first tanks in 1916. The business was owned by Old Gang member William Tritton.

In December 1939, Fostrea's engineers prepared a sketch of the future tank.

Arthur Stern insisted that new car must have an electromechanical transmission. Back in 1916, he unsuccessfully tried to introduce this scheme on the first tanks, but only in 1940 did he have a chance for revenge. The prototype was equipped with a 450 hp 12-cylinder V-shaped Paxman diesel engine, which was planned to be boosted to 600 hp. The mechanical energy of the diesel engine was transferred to an electric generator, which supplied current to two onboard electric motors that set the drive wheels and tracks in motion. There was no gearbox, but instead a rheostat changed the voltage on each electric motor, which made it possible to regulate the speed and direction of the tank.

The development of the electric drive was entrusted to another veteran Xi. H. Metz of Metz and MacLillan, although the English Electric Company was in charge of production.

By May 1940, the order was increased to two prototypes, which received the corresponding names TOG 1 and TOG 2. Recall that TOG is an abbreviation for The Old Gang - the Old Gang.

In February 1940, direct work began on the TOG tank - a wooden model was made and some components and assemblies were ordered. At first glance, the design was striking in its archaism. It was a narrow, tall and long, sluggish design that echoed the concept of the earliest tanks. Externally, the archaism was enhanced by a diamond-shaped hull, tracks made of nickel steel from the First World War and machine-gun sponsons on the sides. However, machine-gun sponsons did not switch to the prototype, but this did not make the tank more modern. A 75mm French howitzer was placed in the front sheet, and a turret from the Matilda tank was placed on top. The armor was supposed to withstand hits from 47mm armor-piercing shells, but subsequently its thickness was constantly revised. On the prototype, the side armor was 65mm thick.

After the first factory tests in the yard of the enterprise, the machine was sent for field tests, which took place on September 27, 1940.

Having determined the weight of the right half of the future tank - 36 tons 711.2 kg, the designers estimated that the total weight of the vehicle at this stage of development would be more than 73 tons. The figure turned out to be impressive, and given that it was obtained by calculation, on a structure that has not yet been fully embodied in metal, without real weight armor, without weapons, fuel, ammunition and crew. The speed reached 13.67 km / h.

On October 6, 1940, the first official demonstration of the project took place in front of the members of the Special Vehicle Creation Committee (SVDC). Willson did not come to the demonstration because he had a very strained relationship with Stern professional level. The reason was that Stern did not have any technical education at all, but he allowed himself categorical statements about the work of specialists.

After the lightning triumph of the German tank troops in France, the archaism and practical uselessness of the TOG tank became more than obvious. The era of highly maneuverable and mobile tanks has come, and TOG does not meet the new requirements of the time. Despite the fact that TOG was hopelessly outdated, even before it appeared, work on it continued. During the tests, it was revealed, although it was initially clear that the tank was completely unmaneuverable, due to the fact that the hull is narrow and the bearing surface of the tracks is long, but nothing could be done about this due to the very design of the vehicle. This was aggravated by the fact that, like the first British tanks, TOG I did not have a spring-loaded suspension at all - small-diameter road wheels were simply rigidly attached to the hull. Electric motors constantly overheated. On tests until May 28, 1941, the car was constantly forced to stop so that the electric motors would not burn out and could cool down.

TOG 1 with turret from Matilda

After testing ended in June 1941, TOG underwent a number of changes. After a failure with an electromechanical transmission, it was replaced by a hydraulic one, work on which continued for two years. In May 1943, the machine, renamed TOG 1A, made its first exit. The new equipment was manufactured by Hydraulic Coupling and Engineering Company. After a month of intensive testing in the Lincoln area, the car returned to the factory for another revision. In July, orders were issued for new components and assemblies. Since that time, the TOG 1A tank remained at the enterprise, where in the spring of 1944 they made it slight changes. Once the modified TOG 1A was ready, it was sent to Chobham on a huge 100-ton Pickfords transporter. Nothing more was heard about him, but this miracle did not appear in the troops.

The order for the TOG 2 was issued on May 6, 1940. It is not known exactly why another TOG design was needed at an early stage of development, but it is most likely related to the armament. The mechanics of the TOG 2 was identical to the TOG 1, with the obvious difference being the tracks. The tracks of the First World War remained unchanged, the spring-loaded suspension also did not appear, but the hull was altered so that the upper branch of the caterpillar, passing the rear drive wheel, descended into the tunnel, through which it went forward and at the exit of the tunnel rose to get on the front sloth. It was necessary to lower the caterpillar into the tunnel in order to expand the hull under the shoulder strap of a larger tower. On the wooden layout the fighting compartment had a 3-inch howitzer in the front plate, to the right of the driver, and on the sides there were sponsons for a pair of Besa machine guns on each side. The box turret of the TOG 2 resembled an enlarged version of the turret from the Churchill Mark III tank. The armament of the turret consisted of a 3-inch howitzer and a 2-pounder anti-tank gun on the right and a Besa machine gun on the left. According to the surviving records, the armor was also impressive by those standards. 63mm cast-iron side sheets were placed on the layout.

When the tank made its first exit on March 16, 1941, it still had a howitzer in the hull, the side sponsons and the turret were made of wood, but even then the weight of the vehicle exceeded 48 tons. The usual minor problems quickly surfaced, but overheating of the electric motors was not noted, as on TOG 1. By the end of March, a cast-iron ballast was installed instead of a wooden turret, and the weight of the tank reached 62 tons. In May 1941, the wooden turret was returned and the TOG 2 was sent for trials at Farnborough. When the car returned to Lincoln in June, new tracks were ordered for it. Now they had protrusions with a mesh pattern for better traction and were made of manganese steel. After that, the tank was photographed with a steel turret bigger size and 3 inch anti-aircraft gun(QF 3 inch 20 cwt anti-aircraft). The car was painted in tricolor camouflage.

TOG 1*

In September 1941, significant changes were made to the design of the tank, and therefore the vehicle was renamed TOG 2*. The guns in the frontal sheet and side sponosons have already been abandoned, and the booking has been revised. The main gear underwent further alterations, but most importantly, it was decided to put a torsion bar suspension on the tank, although this was not implemented until April 1943. Work on the TOG 2 * was clearly delayed, and the requirements of combat in the war changed rapidly. Therefore, the designers decided to arm the tank with a 17-pounder gun in a turret designed by Messrs Stothert and Pit from Baes. In 1944, this tower was installed on the A30 Challenger tank.

A full-size model of the front of the TOG 2 tank. The front sheet has a 3-inch howitzer, a 3-inch howitzer and a 2-pounder in the turret. anti-tank gun, in the side sponsons, 2 Bes machine guns each.

In 1942, the designers suddenly decided to turn the tracks from back to front, like on the A20 tank, and now the protruding part on each link was at the back.

TOG 2 with 57mm gun

Finally, in May 1943, testing of the TOG 2* tank continued. There were no particular problems and it was decided that, in general, the car was ready, although its weight reached almost 80 tons. By 27 May 1943, the TOG 2* was already performing completely flawlessly in trials, however, the War Office was unwilling to order the tank. According to the rules, the car still had to pass official tests in Chobham, but it was already quite clear that TOG 2 * was very late with its appearance.

TOG 2 with 57mm gun

Trying to somehow attach their archaic offspring, the designers planned to make a version of the tank shortened by 1.82 cm, called TOG 2R (Revised) and even discussed the idea of ​​TOG 3. However, none of this was implemented. TOG was originally created for a war that ended over 20 years ago. The Old Gang, seeking to repeat their triumph in TOG, essentially created a tank for the First World War. The fact that the epic with Stern's anachronism dragged on right up to 1944 speaks not only of the personal collapse of Arthur Stern and his Old Gang, but also that instead of creating the tanks that Britain really needed, many of its engineers were engaged in the original nonsense. The TOG tank illustrates well why and how the British tank industry fell into disrepair during the war.

TOG 1 with turret from Matilda. An inclinometer is visible on the back of the board.

tank TOG 2* with 17-pounder gun

sources

David Fletcher- The Greate Tank Scandal-- HMSO, 1989

Peter Chamberlen and Chris Ellis -- British and American Tanks of World War Two-- Silverdale Books, 2004

With the advent of tanks, many designers had a completely logical idea that the large size of the tank would allow it to be armored to the maximum and make it invulnerable to enemy fire, and the large carrying capacity would strengthen its armament. Such tanks could actually become mobile forts supporting the infantry in breaking through the enemy's defensive formations. In the conditions of the First World War (hereinafter referred to as WWI), when the governments of the countries of the world directed multimillion-dollar funds to supply rapidly growing armies, funding for the most fantastic projects that promised a quick victory also grew.

Starting from WWI and until the very end of World War II (hereinafter referred to as WWII), hundreds of the most unimaginable armored monsters were developed, of which only a few reached embodiment in metal. This article provides an overview of ten of the heaviest, largest and most incredible armored vehicles from around the world that have been partially or fully brought to life.

"Tsar Tank"

The largest in size was the Russian "Tsar-tank". Its developer Nikolai Lebedenko (in honor of him the car is also sometimes called “Lebedenko’s tank” or “Lebedenko’s car”), through unknown ways, achieved an audience with Emperor Nicholas II, which took place on January 8 (according to the new style - January 21) 1915. For the audience, the engineer brought a skillfully made wooden self-propelled model of his offspring, which started and moved thanks to a gramophone spring. According to the memoirs of the courtiers, the designer and the tsar fiddled with this toy “like little children” for several hours, creating artificial obstacles for it from improvised means - volumes of the Code of Laws Russian Empire". The tsar was so impressed with the model, which Lebedenko eventually gave him, that he approved the financing of the project. With its design, the tank resembled a huge artillery carriage with two large front wheels. If the model was held by the back of the "carriage" with the wheels down, then it looked like a bat sleeping under the ceiling, which is why the car received the nickname " Bat"and" Bat.

Initially, it was clear that the project was not viable. The largest and most vulnerable element of the new tank was the huge 9-meter wheels, the supporting structure of which was the spokes. They were created in such a way as to increase the patency of the tank, but they were easily disabled even artillery shrapnel, not to mention high-explosive or armor-piercing shells. There were problems with the cross-country ability of the car. Nevertheless, thanks to the royal patronage, the tank was quickly built. Already in August 1915, it was assembled at a makeshift training ground near the city of Dmitrov, Moscow Region, however, due to poor cross-country ability, it remained to rust in the open air until the early 1920s, until it was dismantled for scrap. As a result, thousands of rubles public funds were wasted.

The fighting compartments of the tank were housed in a hull located between its giant wheels. The armament was located in a machine-gun turret for six machine guns, built on top of the hull, as well as in sponsons located at its ends, protruding beyond the wheels. Sponsons could accommodate both machine-gun and artillery armament. It was envisaged that the crew of the tank would be 15 people. Perpendicular to the hull was a "carriage carriage", the main purpose of which was to create a stop when firing. On the "gun carriage" the crew got into the fighting compartments of the tank.

The dimensions of the Tsar Tank were amazing - its length was 17.8 meters, width - 12, height - 9. It weighed 60 tons. This machine became the largest and most ridiculous tank in world history.

Char 2C (FCM 2C)

This French tank became the largest and heaviest production tank ever. world history tank building. It was created by the FCM shipbuilding company at the very end of WWI, but never took part in hostilities. As conceived by the designers, the Char 2C was supposed to be a breakthrough tank that could effectively overcome German trenches. The French military liked this idea, and on February 21, 1918, 300 vehicles were ordered from FCM. However, while shipbuilders launched production, the war ended. The tank turned out to be low-tech and expensive, and the manufacture of each of its units took a long time. As a result, until 1923, only 10 machines were manufactured. Since the French government experienced certain financial difficulties after the WWII, and the Char 2C was very expensive, it was decided to stop its production.

The Char 2C weighed 75 tons and had a crew of 13. It was armed with one 75 mm cannon and 4 machine guns. Tank engines "ate" an average of 12.8 liters per kilometer covered by the car, so a tank with a capacity of 1280 liters was enough for a maximum of 100-150 kilometers, and on rough terrain this distance was even less.

Char 2Cs were in service with the French army until 1940. With the outbreak of hostilities in France during WWII, a battalion of these already obsolete tanks was sent to the theater of operations. On May 15, 1940, the train with the materiel of the battalion got into a traffic jam while proceeding to the places of unloading near the city of Nechâteau. Since it was not possible to unload such heavy tanks from the platforms, and the station where the train was stuck was approaching German troops, the French crews destroyed their armored vehicles and retreated. However, as it soon became clear, not all Char 2Cs were destroyed. In particular, car No. 99 fell into the hands of the Germans intact and was tested by them at the Kummersdorf training ground. Her further fate is unknown.

German soldiers pose against the backdrop of the captured French giant tank Char 2C No. 99 Champagne.
Next to the tank are disassembled parts of its engine.

K-Wagen

At the end of March 1917, the Inspectorate of the Automobile Troops of Kaiser Germany instructed the chief engineer of its experimental department, Josef Volmer, to create a tank that, according to its technical parameters, would be capable of breaking through enemy defense lines.

In the event of its successful and timely completion, this tank would have become the heaviest tank of the WWII - its weight would have reached 150 tons. Two six-cylinder Daimler gasoline engines with a capacity of 650 hp each were chosen as power plants for it. everyone. The tank was to be armed with 4 77 mm guns placed in sponsons and 7 7.92 mm MG.08 machine guns. Of all the heavy tanks, the K-Wagen had the most numerous crew - 22 people. The length of the tank reached 12.8 meters, and if not for the Russian Tsar Tank, it would have become the longest super-heavy tank in the history of tank building. In the design documentation, the tank was called Kolossal-Wagen, Kolossal or K. The use of the index "K-Wagen" is generally accepted.

In April 1918, the construction of these machines began, but the rapid end of the war stopped all work. The German tank builders had almost finished assembling the first copy of the tank, and for the second, the armored hull and all the main units, except for the engines, were ready. But the Entente troops were approaching German enterprises, and everything manufactured was destroyed by the manufacturers themselves.

FCM F1

In the early 30s, it became clear to French military functionaries that the FCM 2C tank was hopelessly outdated. Since French military thought believed that future wars would be of the same positional nature as the WWII, it was decided in Paris that the army needed new heavy breakthrough tanks.

In February 1938, the Armaments Advisory Board, headed by General Duflo, determined the main performance characteristics future tank to announce a design competition. The Council put forward the following requirements for the armament of the vehicle: one large-caliber gun and one rapid-fire anti-tank gun. Besides, new tank was supposed to be equipped with anti-projectile armor that could withstand the hit of shells from all anti-tank artillery systems known at that time.

The largest French tank builders (FCM, ARL and AMX) participated in the competition, but only FCM was able to start creating a prototype. Its engineers designed a tank with two turrets arranged like battleships on different levels so that they do not interfere with each other to conduct circular fire. In the rear (higher) tower, a 105-mm main-caliber gun was to be installed. In the front turret, a 47-mm rapid-fire anti-tank gun was mounted. The thickness of the frontal reservation of the car was 120 mm. It was assumed that the prototype would be ready by the end of May 1940, but this was prevented by the rapid German offensive in France. Further fate semi-finished prototypes is unknown.

TOG II

In October 1940, the first copy of an experienced British tank TOG І was created. Its name, which stands for "The Old Gang" (English - "old gang"), hinted at the considerable age and experience of its creators. The old principles of tank building manifested themselves in the layout and appearance this combat vehicle, as well as in its characteristics. TOG I had a typical WWI layout and had a low speed of 5 mph (8 km/h). The guns and machine guns, originally placed in sponsons, were eventually replaced by a turret from the Matilda II tank, mounted on the roof of the hull. Its tracks, like those of other WWI tanks, covered the hull, and were not placed on the sides of it, as in modern tanks. Since the weight of the vehicle was 64.6 tons, it is difficult to attribute it to super-heavy tanks. The tank was modernized several times until 1944, but it never went into production.

In 1940, in parallel with TOG I, the creation of TOG II began. In metal, it was implemented by the spring of 1941. This tank was made heavier than the previous model - it weighed 82.3 tons. Due to its long length, independent torsion bar suspension, and the fact that each track was driven by a separate electric motor, this tank had increased cross-country ability. The electric motors were powered by a generator driven by a diesel engine. power plant. Therefore, despite the heavy weight, the tank could overcome walls 2.1 meters high and ditches 6.4 meters wide. His negative qualities were low speed(maximum 14 km / h) and the vulnerability of caterpillars, the design of which is hopelessly outdated. The tank received a specially designed turret, which housed the only tank gun of 76.2 mm caliber and a machine gun. Subsequently, design upgrades continued, the TOG II (R) and TOG III projects appeared, but none of them was put into serial production.

Pz.Kpfw VIII Maus

In December 1942, Ferdinand Porsche was summoned to an audience with Hitler, whose company's designers completed the design of the Maus super-heavy tank (German - "mouse"). A year later, on December 23, 1943, the first prototype of the tank came out of the gates of the Alkett tank-building enterprise (Almerkishe Kettenfabrik GmbH), which was part of the Reichswerke state concern. It was the heaviest manufactured tank in the history of world tank building - its weight reached 188 tons. The frontal armor plate reached a thickness of 200 mm, and the stern - 160 mm. Despite the fact that the tank had a huge mass, during its testing it turned out that it is very maneuverable, easy to control and has high maneuverability. The tank was modified, passed field tests, and its second copy was made. But in the second half of 1944, Germany ran out of funds to ensure regular deliveries of even serial tanks, not to mention the launch of new expensive vehicles.

In mid-April 1945, the Kummersdorf test site was captured Soviet troops. Both copies of the tank, which were disabled during the battles for the training ground, were sent to the USSR. There, from two damaged vehicles, one whole was assembled, which to this day is on display at the Central Museum of Armored Weapons and Equipment in Kubinka.

Pz.Kpfw VIII Maus Porsche Type 205/1 with Krupp turret at the Böblingen factory, April 9 or 10, 1944

A39 Tortoise

From the beginning of 1943, the development of a new breakthrough tank began in the UK. The project was named Tortoise (English - " land turtle”), as it envisaged that the future tank would have thick armor, powerful weapons and would hardly be able to have high speed. As a result of design research, a number of projects of machines with the “AT” index were born, which never went into production. In the end, designers and customers from the Special Equipment Development Committee of the British Ministry of Supply settled on the AT-16 model, which received the official index "A39". In February 1944, 25 units were ordered for production, which were to be completed by September 1945. However, in May 1945 fighting in Europe ended, and the committee reduced the order to 12 cars. In February 1946, the order was halved again, and as a result, only 5 vehicles were manufactured. The units of the sixth copy of the A39 were used as a source of spare parts.

Super heavy assault self-propelled artillery mount(according to the British classification - a tank)
A39 project "Tortoise"

In fact, the Tortoise was not a tank, but an SPG, since the A39 did not have a turret, and the 94-mm cannon was placed right in the frontal part of the conning tower. However, according to the British classification, the self-propelled guns could not be so heavy (the weight of the A39 reached 89 tons), and it was decided to classify it as a tank. To the left of the gun was a BESA machine gun (the English version of the Czechoslovak ZB-53), and two more such machine guns were mounted in a turret on the roof of the vehicle. The self-propelled guns did not go into a large series, since against the background of modern heavy Soviet tanks(after the war, Britain considered the USSR as the main potential enemy) it was outdated both in mobility (maximum speed - 19 km / h) and in armament, although its powerful frontal armor 228 mm thick impressed contemporaries.

The heaviest British tank A39 of the Tortoise project at the Bovington Tank Museum

Pz.Kpfw. E-100

T28-T95 (Turtle)

Overseas, too, did not sit idly by. In September 1943, the United States began work on its own breakthrough tank. The states were preparing to enter the war in Europe and feared that it would not be easy to overcome the “Atlantic Wall”, built by the Germans on the coast, and then the Siegfried Line. But, as is often the case, the army functionaries came to their senses quite late (apparently, forgetting to take into account that the creation of fundamentally new tanks is a lengthy process).

It was planned to install a 105-mm T5E1 cannon as the main armament on the tank. starting speed its projectile, as military functionaries believed, was sufficient to break through the concrete walls of pillboxes. The gun was supposed to be placed in the frontal armor plate of the vehicle - this decision was made in order to reduce the silhouette of the T-28. In fact, the new car was not a tank, but a breakthrough self-propelled gun - the US military eventually realized this, and the car was renamed the T-95 self-propelled guns. As the Americans like to do, at the same time she was given the nickname "Turtle" (English - "turtle"). The self-propelled guns were equipped with an electric transmission designed for installation on T1E1 and T23 tanks.

Design studies and bureaucratic delays led to the fact that the decision to manufacture prototypes was made only in March 1944. But the military rejected finished project and ordered three cars, the frontal reservation of which was to reach 305 mm, which was one and a half times higher than the previously planned 200 mm. After the changes made, the weight of the car increased to 86.3 tons. To reduce the pressure on the ground and increase the cross-country ability of the self-propelled guns, it was decided to make its tracks double. As a result, the new project was ready only by March 1945, when the fighting in Europe and the Pacific front was drawing to a close. The first prototype was shipped to the Aberdeen Proving Ground when it was no longer needed, on December 21, 1945. The production of the second copy was completed on January 10, 1946.

As a result of lengthy tests conducted in 1947, the US military again renamed the T95 into the T28 breakthrough tank, since, in their opinion, the self-propelled guns could not weigh so much. Almost at the same time, they came to the conclusion that the low speed of the machine did not answer modern conditions waging war. As a result, the T28 (T95) was abandoned, but perhaps the American bureaucrats were simply tired of puzzling over the classification of this machine.

"Object 279"

It would be unfair to ignore the USSR - a country that can rightfully be called the most "tank" power of the 20th century. In the last century, Soviet enterprises produced the largest number of tanks and designed the largest number of their models. However, super-heavy tanks were not carried away in the country of the Soviets. Before the start of WWII, they simply did not have enough funds, and during the war, there was also time. So, in the summer of 1941, at the Leningrad Kirov Plant, they developed a project for a super-heavy KV-5 tank, the weight of which would reach 100 tons, but in August German troops approached Leningrad, and work on this project was stopped.

After the end of WWII, with the advent of cumulative ammunition, it became clear to all tank designers that it was irrational to create combat vehicles heavier than 60 tons. With such big weight they cannot be made fast and maneuverable, which means that, despite the most powerful armor, they will be quickly knocked out. But there was a ghost on the horizon nuclear war, and the designers began to develop machines that were supposed to fight in hitherto unseen conditions.

In 1957, an amazing tank was created in the Design Bureau of Zh. Ya. Kotin of the Leningrad Kirov Plant under the leadership of L. S. Troyanov. Although it weighed only 60 tons, and by weight it cannot claim the title of a super-heavy tank, but in terms of the level of armor, it is quite. The wall thickness of its cast tower along the perimeter was 305 mm. At the same time, the thickness of the frontal armor reached 269 mm, the sides - 182 mm. This thickness of armor was obtained due to the original shape of the hull, more like a flying saucer than a tank. An unusual product was assigned the index "Object 279". The experimental armored vehicle was armed with a 130-mm M-65 rifled gun with a barrel blowing system. Of all the super-heavy tanks realized in metal, the caliber of the main gun of the Object 279 is the largest.

The machine was equipped with a complex system of non-adjustable hydropneumatic suspension and double tracks. Such technical solution allowed to reduce the pressure on the ground, increase the patency of the tank, but seriously worsened its maneuverability. This factor, as well as the complexity of the machine to maintain, was the reason that the project did not go beyond the creation and testing of a prototype.

"Object 279" in the exposition of the Central Museum of armored weapons and equipment in Kubinka

Tog 2 is probably one of the most non-standard premium (and not only) tanks that players have ever seen. Why? A level 6 tank has 1400(!) HP. I already had a chance to meet him on his own tank cardboard, but if he is on line 1 in general list opposing team, it will be quite difficult (although highly dependent on the team).

In the full record you will find the history of the creation of the tank, performance characteristics and screenshots.

Tank history

Prototype infantry tank TOG 2 made the first factory “jogs” on March 16, 1941. Further tests did not reveal any special remarks, but time was hopelessly lost. The tank had a maximum speed of 14 km/h and a cruising range of up to 112 km. Thanks to its undercarriage, TOG 2 could overcome vertical walls up to 2.1 m high and ditches up to 6.4 m wide, which was certainly an impressive result. Six months later, it was decided to make new changes to the design of the tank, in connection with which its name was changed to TOG 2 *

The most important improvement was the use of a torsion bar suspension, which provided better driving performance. In addition to this, a new turret and a 76.2 mm gun were finally installed on the tank.
Trials beginning in April 1943 confirmed that the TOG 2* was the heaviest (over 81 tons) and most powerful British tank, but the concept it was built on was long outdated. Even despite the strong armor, the TOG was inferior in terms of dynamic qualities and armament not only to the German "Tiger", but even to the weaker Pz.Kpfw.IV with a long-barreled 75-mm cannon. Maneuvering warfare for such machines was disastrous.
However, in 1942, work began on the design of the TOG 2R modification (R - revised, corrected), on which they intended to reduce the length of the undercarriage due to the final rejection of the sponsons, while maintaining the torsion bar suspension, 76.2-mm turret gun and turret with electric drive. Further development heavy infantry tank led to the emergence of the TOG 3 project. However, none of them was ever implemented.

Unlike TOG 1A, the fate of TOG 2* turned out to be happier. After the war, the tank was sent to a warehouse, from where it was soon removed, repaired and transferred to the tank museum in Bovington. By the way, the Paxman engine remained “native” on it, although the tank is now not running.

Specifications

Crew

Commander
mechanic
radio operator
gunner
Charger x2
Speed 14 forward, 7 back
turn rate 22, turn on the spot

Hull armor

Forehead 76.2
sides 76.2
feed 50.8

Tower armor

Lob 114.3
Boards 76.2
ass 53.3
Review 360m

gun

Cannon OQF_17pdr_Gun_Mk_VII_A
BC size 70 shells
Spread 0.4
Recharge 4.5
Mixing 2.3
Penetration 171/227/38

Paxman Ricardo engine, 600 hp
Walkie-talkie British Wireless set N19, 570m

Tog 2 will appear in World Of Tanks in

Screenshots