Proper knife throwing. Five ways to learn to throw a knife. How to practice knife throwing

20.06.2020

Knife throwing is not only a popular act in the circus, but also an ideal activity to get rid of and, as they say, "let off steam". Another similar hobby improves coordination and eye.

How to learn to throw ordinary knives?

For throwing, you can use not only special blades, but also a pen or ordinary kitchen appliance.

Turn to the left and extend the palm of your right hand in front of you. Place the knife on the edge of your palm with the handle away from you. Having determined the point of balance, grab the blade and swing. The knife should make a semicircle and be on target. The applied force depends on the distance. With a little practice, you will "feel" the knife, and the result will be achieved.

How to throw knives from above?

If you have chosen this for yourself, then you should purchase special knives. Stand with your left side towards the target, feet shoulder-width apart. Take the knife in your right hand, and pull the left towards the target. Make a swing with your right hand, the knife should be either above the head, or at its level. Keep the blade on the same axis as the forearm. Making a push with the right foot and a strong swing of the arm, throw the blade at the target. You need to throw on the exhale.

How to throw knives without revolutions?

Experts say that this technique is easy to learn. It is based on the fact that the rotation of the knife is compensated by the brush and, without turning in the air, it hits the target with the blade. For such a technique, you need to choose a knife 20 cm long, no more than 4 mm thick and without hooks on the handle. Throwing metal knives with non-reverse equipment is not difficult, since the main thing here is to control the position of the hand. The elbow is a conditional point and it is around it that the rotation of the forearm and palm occurs. It should be in front of the chest and in a motionless state. Experts recommend that you imagine a wall near the right shoulder and make a throw along it. To increase the centrifugal force at the final point of the throw, a rotational movement is made with the brush.

Throwing combat knives

Throwing a combat knife, in our opinion, is the same as throwing a pistol at an enemy: of course, you can, but it’s better not to. In hand-to-hand combat, a pistol, without cartridges, will be more useful as a "brass knuckles" than as a projectile. Similarly, throwing a combat knife means simply being left with "bare hands". You should not treat your weapons as consumables. A real professional picks up a weapon for a long time and patiently and completes his search only when he feels closeness or even, if you like, kinship with him. Between the warrior and the weapon, a very special relationship arises and eventually strengthens. The combat knife becomes part of the warrior, an extension of his hand. However, a fighter is ready to sacrifice not only his hand, but his very life in the name of the cause he serves. Throwing a combat knife from the category of just such victims. And since such sacrifices are possible, and sometimes necessary, the time has come to talk about this problem.

First of all, it should be noted that the combat knife is not designed specifically for throwing - for this purpose, special throwing tools are being developed that are designed exclusively for accurate, strong and long-range throws. The shape, size, weight, balancing of throwing weapons - everything there works only for a successful throw. But the combat knife is created for hand-to-hand combat and should be used for its intended purpose.

By itself, a combat knife will not stick. It is not enough to throw it at the target strongly and accurately, you must also be able to control its flight. This is where the complexity of combat throwing lies. At present, few warriors can boast of the knife-throwing combat technique. And this is not surprising: if the skillful possession of a knife in hand-to-hand combat characterizes the highest degree of skill of a professional, then throwing in this case is the pinnacle of martial art.

What is this process? First of all, let's talk about the tasks that a warrior can solve with a masterful throw of a combat knife. Let's start with the obvious, with the destruction of the enemy at a distance. This is the most difficult task. As a rule, its solution is achieved by the defeat of vital centers. To do this, you need to hit with sufficient force in very small areas of the enemy's body. Many people are capable of such a throw after some training. However, the main problem of throwing is not this - the knife must also pierce the body of the enemy. In flight, the knife rotates, and the ability to make this rotation manageable is precisely the main difficulty of throwing, pursuing the destruction of the enemy.

There are two fundamentally different ways to control the rotation of the knife. The first is considered traditional. It is based on a throwing movement brought to automatism. This can be achieved by repeatedly repeating a standard, typical action - a powerful roll for accuracy. This is how a penalty kick is practiced in handball or a penalty kick in football. Ready, swing, throw... Day after day. Same. Many thousands of times.

Well, but in a real battle, the enemy can be closer or further away. How is it possible to hit him at a distance of two to ten meters, using a single, standard throwing movement? To do this, the place of the grip of the knife is shifted, and the knife is given the desired rotation speed in each specific throw. Moreover, the farther the enemy is, the closer to the middle the knife is taken and the slower it rotates in flight. And the lower the speed of rotation of the knife, the greater the distance it will fly in one revolution.

It is this throwing technique that is used most often. However, due to obvious limitations, such throwing is usually used against an unsuspecting enemy, for example, from an ambush.

The second way to control the rotation of the knife is used much less frequently. It is paradoxical, but true: despite the fact that this method is much more difficult to understand and master, it significantly simplifies the use of a combat knife for throwing and expands its capabilities. The fact is that the concept of "throwing technique" for this method is absent. He does not need to painstakingly work out standard throwing movements. Moreover, any hard, traditional form of throwing is simply not good for such throwing. Indeed, in this case, the speed of rotation of the knife depends on the form of the throwing movement. No need to stop, take special "throwing racks" and pick up the grip. The knife is held with the same grip, and each movement of the fighter only enhances the striking possibilities of the throw. In general, it is difficult to imagine a picture of close combat in which throwing of the second type would not “fit in” or from which it would not naturally “follow”.

At the heart of this method of controlling the flight of a knife is an internal image, a kind of “thought-action”. It is not difficult for us to stick a knife, holding it with our hand. And if, when throwing a knife, imagine that the hand does not release the knife, but reaches the target. It’s not like a throw, it’s more like a blow. But, this is precisely the main problem of such throwing. It is necessary not to imitate this blow, not to try to copy it exactly, but to really guide the knife along the trajectory, literally “driving” it into the target. Only in this case, the knife will acquire that single smashing speed of rotation and hit the enemy with impeccable accuracy. It is important that even a moment before the knife "came off" from the hand, the fighter had already completed the "thinking action" - he drove the knife into the target to the very handle. The actual flight of the knife can no longer affect this result.

The difference between these two methods of control is huge. If in the first case it is an impeccable form, a jeweler's eye, an instant adjustment of the throwing mechanism, then in the second it is a complete unity, a merger of the internal state of a fighter with the situation and purpose.

Concluding the conversation about the two ways to control the rotation of the knife, it should be noted that all of the above is true for any grip of the combat knife. If the knife is held by the handle, then throwing can be performed both without turning the knife, and with one full turn (by 360 degrees). When throwing with a grip on the blade, the knife makes half a full turn (180 degrees). But, one way or another, with any of these options, throwing can be performed in both the first and second ways.

The traditional way to control the rotation of the knife is based on the standard throwing movement - a powerful throw for accuracy. Moreover, the farther the enemy is, the closer to the middle the knife is taken and the slower it rotates in flight. And the lower the speed of rotation of the knife, the greater the distance it will fly, turning to the required angle. Such throwing is most typical for grasping the blade of a knife.

With traditional throwing, it is possible to throw a knife held by the handle. In this case, the rotation of the knife is controlled in the same way as when throwing with a grip on the blade: by first intercepting the handle closer to the center of gravity of the knife or further from it.

The second way to control the rotation of the knife in flight does not provide for a change in grip depending on the distance of the target. The grip is standard for throws to any achievable range. And the required speed of rotation of the knife is set by changing the form of the throwing movement itself. The peculiarity of the second method lies in the fact that the form of each throwing movement is only a consequence of a kind of "thought action" - an internal effort aimed at hitting the target.

Throwing in the second way is especially effective when gripping the knife handle. In this case, the transition from combat work to throwing can be carried out practically without any preliminary preparation. For example, immediately after the end of the protective action or simultaneously with the removal of the knife. At the same time, at short distances, a “non-reversible” throw is performed, at medium and long distances - with a turn of 360 *.

In addition to tasks involving the destruction of the enemy, knife throw can be used in some other cases.
So, an accurate and strong blow with a handle or a flat knife will easily stop, or even knock down an approaching or even fleeing enemy. An even more traumatic throwing technique is also possible, when the knife, bumping into the enemy with a handle or guard, begins to behave like a bullet with a displaced center of gravity.

In some cases, a knife that has stuck a millimeter from the enemy's head can instantly calm him down, completely suppress aggression.

Sometimes, a knife is used to distract or, conversely, to attract attention. For example, even an ordinary eloquent swing towards the enemy can make him take cover and thus provide the fighter with a few priceless moments to get out of the affected area. And an exact hit, for example, in a metal barrel or window glass will successfully replace the shot of a sentry raising the unit on alarm. Not to mention the alarm triggered when hitting a car.

It is not difficult to imagine situations in which the accomplishment of a combat mission depends on whether it is possible to disable the enemy's technical means or not. Cut off power or communication lines, disable a radio station or navigational instruments, smash a windshield or a searchlight, jam a mechanism or an aircraft turbine - all this and much more can be done if you manage to stick a knife at the right point with an instant throw.

But returning to the beginning of our conversation, let us once again recall that throwing a combat knife is permissible only in extreme, urgent cases. As a rule, all the tasks listed above are successfully solved with the help of special throwing weapons, or even just improvised means.

Well, a short video on how exactly to throw :)

and the release of the "KNIFE" program, which tells a little about the types of steel used for, as it were, throwing knives sold on the territory of the Russian Federation.

knife throwing is one of the long-standing trends among sports activities. Classes with this type of physical activity have a positive effect on the entire musculoskeletal system of a person and the body as a whole. To achieve high skill in throwing knives, you must have exceptional self-control, as well as serious psychological preparation, which are acquired only in the course of regular practice. are a serious weapon, and you need to treat this type of physical activity with all responsibility. Benefits of training in throwing knives undeniable:

The person gains additional confidence;
Improves his ability to concentrate;
Improves coordination of movements;
Increased resistance to stress;
Promotes the development of the eye;
Increases the ability to quickly and adequately assess the situation to make the right decision.

If you are not a supporter of "carrying iron", but you like something more intellectual, then you should pay attention to throwing knives. This type of physical activity not only strengthens all the muscles, but also helps to increase self-esteem and self-confidence.

How to throw knives correctly?

How to properly throw throwing knives to achieve certain results? There are several stages of throwing knives. The main requirement is caution in working with this type of sports equipment. Steps for throwing knives:

1.Preparing to Throw a Knife:

Choose a throwing knife. In total, there are three types of throwing knives: with a heavy blade, with a heavy handle and balanced knives. If you are new to throwing knives, then you should prefer a knife with a heavy blade or handle, as they turn over more easily during the throw. If you have several throwing knives, then you need to start training with heavier models. If you have a knife with a heavy blade, then you must throw it by holding the blade. If the knife has a heavy handle, then it must be thrown by holding the handle.
Take the throwing knife in your dominant hand. The knife must be held firmly so that during the throw it does not slip out and injure neither you nor anyone nearby. You need to hold the knife as if you were holding a hammer by the handle. The handle of the knife is placed in the open palm and wrapped around with four fingers. The thumb rests on top. This knife grip technique is useful when throwing a double-edged knife.
A knife with a blade without a handle must be taken with a pinch. To do this, you need to stretch your palm in front of you and position your thumb so that a crease forms between it and the palm. The knife is taken with the handle away from you, the tip is directed down, the blunt side should lie in the fold. The thumb should rest on one side of the blade, and the rest of the fingers, except the little finger, on the other side of the blade. So you can hold the knife firmly without putting pressure on the pointed part of the blade. How to hold a throwing knife correctly can be seen on video on the internet. The same grip technique works for a double-edged knife, but for beginners it is best to hold a throwing knife like a hammer.
Depending on how far you are going to throw the knife, you need to choose the correct position of the knife before throwing. It is worth remembering that while throwing by the handle, the knife must have time to turn in the air at least once, and - for the blade - one and a half times. In accordance with this, the angle of inclination of the knife during the throw also varies. When throwing at short distances, it is necessary to raise the wrist to the forearm, so the knife will have a higher speed for turning in the air. With an average throw distance, it is necessary to bring the wrist even further behind the forearm. On a long knife throw, the wrist should not be bent at all, as there is no need to give it additional acceleration.
Choose your target for knife throwing. When choosing a target, it is important to remember that it must be located in a safe place where no one can appear in the throwing zone and get under your throwing weapon. The target to be thrown should be soft enough, but not so soft as to pierce it through. For beginner throwers, you can use cardboard boxes, softwood targets. It is important that the knife enters the target easily. To practice accuracy, it is necessary to move away and approach at different distances from the target. By counting the steps to the target, you can easily learn how to choose the right throw force to hit the target. The target for throwing can be very different - hanging, standing, moving, etc.

2. How to throw throwing knives correctly:

In order to successfully throw a knife, you must take the correct stance. To do this, you need to transfer your body weight to the dominant leg. Move the other leg forward. Raise your hand with the knife in front of you and bend your elbow so that the knife is at the level of your head. The knife must be held firmly and carefully so as not to injure yourself or those who are nearby.
Swing the knife, shifting weight from your dominant leg to your forward leg, creating momentum. Next, straighten your arm with the knife forward. From this position, the throw is made. In order to get used to this position, it is worth practicing several times, swinging in this position. When throwing knives, the hand should only move straight, up or down, avoiding throwing at an angle. The visualization of chopping firewood helps a lot. Imagine that you are not throwing a knife, but chopping wood, when the movement of the hand with the ax should be strictly forward and down.
After releasing the knife, complete the throw. At the moment when the arm with the knife is fully extended and aimed at the target, just let the knife move, giving it acceleration. In this case, your body should be slightly tilted forward with an emphasis on the forward leg. It is important to release the knife in time, then it will fly the distance to the target and hit it at an angle of 90◦.

How to throw throwing knives to hit the target with high accuracy? Not much, but dynamic. In fact, for a well-aimed hit, very little strength is required, but concentration when throwing is important.

Knife Throwing Mistakes

If you threw a knife, and he hit the target not with a point, but with a handle, then you should take a step back and try to throw again. The knife did not have enough distance to make a turn. One step is equal to half a turn of the knife. There is no point in increasing the power of the throw. You can either reduce the distance to the target by a step or increase it.

If you throw heavy knives, then in order to hit the target exactly, you need to choose a point for the sight, slightly higher than the target being hit.

How to properly throw throwing knives we have already considered, now we can talk about some rules for the care of knives for throwing and the safety of the process of throwing knives:

After completing the training process, be sure to clean the knife, removing traces of substances from it that can get on its surface from hitting your targets. This is especially important if fruits, vegetables, meat, etc. were used as the target.
To choose the most ideal throwing knife for yourself, you need to try tagging several varieties of knives, both with a heavy handle or blade (with a shifted center of gravity), and a balanced knife. It is important to feel the power of control when throwing a knife, then it will immediately become clear what suits you best.
Lighter throwing knives are more suitable for hitting the target.
Use common sense when throwing knives. Choose your goals consciously and with an eye on the consequences.
It is better not to use kitchen knives for throwing knives. They quickly fail and become dull.
When throwing knives, you should not squeeze the knife too hard so as not to cut yourself, but a very weak grip can lead to injury. Find the best option for your efforts.
If you are just learning how to throw knives then you should not take a folding knife as a throwing knife. It is worth giving preference to knives with a fixed blade.
Consider the fact that during training, not all of your throws will be successful, and the knife may bounce off the target. Therefore, do not stand too close to the target, but concentrate your eyes on the knife until you are sure that it is safe.
For training, do not use too sharp knives.
The training process should not be carried out indoors, especially in an apartment. You can break a window, damage furniture and household appliances. It is advisable to conduct classes on the street in a secluded place or in special sections for practicing this type of physical activity.
Before throwing, always make sure that no one gets into your target area and gets hurt.

What do you need to learn how to throw knives?

In order to start training, you must:

Buy a fixed blade knife. If possible, purchase knives of various types to choose the best option for yourself.
Find a suitable place where you will train. It is desirable that this place be secluded.
Buy a target. Softwood boards, cardboard boxes, trees, etc. can be used as a target. It is important that your knife does not penetrate the target through, but gently enters it.
You should always have a first aid kit with you with the most necessary first aid for injuries.

How to practice knife throwing?

The main principles in conducting knife throwing training sessions are concentration, attention, purposefulness and the possession of certain physical data. The whole training process is to systematically carry out a pre-prepared exercise plan. This plan is drawn up individually, depending on what skills you would like to acquire during this training. If you study on your own, then draw it up yourself, if you study with a trainer, then he should draw up such a plan for you for each lesson. An example of the simplest workout plan:

With each throw, you need to train your breathing. It must be consistent with the different phases of the throw.
Choose for yourself the strength of the throw. Remember that in throwing knives, strength does not play a leading role.
Posture of the body, movement of the legs and torso.
Correct positioning of the hand, palms. It is important to know and be able to properly hold the knife during the throw.
Focus on the target and its distance.
Work out standard positions at different distances, taking into account the use of different types of throwing knives. For example, throwing a medium-sized knife from a distance of two meters to the target every 10 seconds; throws with a large knife from a distance of 3 m from the target every 15 seconds; throwing a small knife from a distance of 1.5 m from the target every 10 seconds, etc.

Usually, the training process, for many, comes down to the repeated repetition of certain exercises, with a detailed analysis of them into components.

have read 5620 time(s)

How to throw a knife correctly? The rules for this apply equally not only to special throwing knives, but also to ordinary cupronickel cutlery and even to long nails.

After an unsuccessful throw, the knife bounces off the target at the same speed as it flies towards it, but whether you have time to bounce is another question. Therefore, the main rule is: dull the blade (strongly), and leave the point itself a little sharp. The knife will still dig into the tree, but it’s unlikely to hit you.

So, learn about the three main rules on how to throw a knife correctly.

№1

Find the center of gravity of the knife by balancing it on your index finger. Well, if it turns out to be a "balanced" knife - one whose center of gravity is exactly in the geometric center.

№2

Grasp exactly the found point with your index and thumb. With the tips of the rest, press the blade to the palm of your hand, placing it on the line of life towards you. Simply put, don't grip the knife with all your might. Hold it as if you are trying not to let go of a sparrow. The blade should pass freely between the fingers.

No need to hoot bravely and spit in the palm of your hand. From moisture, friction will increase, and the sliding of the knife will slow down. If your palm is sweating, just sprinkle it with talc or starch.

№3

Stand at a distance of at least three and no more than four meters from the target. A knife thrown from this point, having made half a turn, will surely fly up to the target with the tip forward (they say that the physics “Dynamics of rotating bodies” is somehow involved in this).

When experimenting with throwing distance in the future, remember: if it is less than 3 meters, hold the knife a little closer to the tip. If the distance is more than 4 meters, move the grip closer to the handle.

As practice shows, absolutely any knife can be thrown. Table, pen, even a long and sharp nail - this does not matter in the slightest, since the principles are the same everywhere. Only, of course, after several successful throws, such an impromptu throwing weapon will become loose and blunt, so it will no longer be as dashing to stick into the target. It can also be difficult to balance, since all these cutting objects are extremely rarely balanced. Therefore, it is to study throwing knives best of all on specialized throwing knives that can be bought at any military store. If you can handle them normally, then any other knife will no longer be a problem for you. But let's start from the beginning. So, 5 basic rules knife throwing. Yes, in this case we are talking about reverse throwing, since in flight the knife makes from half to one and a half turns.

Find the center of gravity

To find the center of gravity, try to balance the knife on your finger. With a weapon perfect for knife throwing, it is located in the geometric center. But if the center of gravity is shifted, it doesn't matter. However, this must be taken into account in the future if you want the knife to fly right on target.

Estimate the distance

Depending on how many meters separate you from the target, the capture point for knife throwing. Usually they use a distance of three to four meters - in this case, the knife in flight manages to roll over 180 degrees and enter the target with a sharpened blade. Namely, this should be calculated.

Get the right knife

Take the knife by the found center of gravity with your thumb and forefinger. With the rest of your fingers, press the blade into your palm. The cutting edge, of course, must be directed outward. You don't need to press hard. Don't care about your hands either. This will increase friction and reduce control of the thrown weapon. This grip is recommended for standard distance. If it is less than three meters, take the knife closer to the point. If the distance is from four to five, then the grip should be carried out closer to the handle. Well, if the distance of throwing knives exceeds five meters, then immediately take the knife by the handle. In this case, the knife in flight will make about one and a half turns, so it can normally stick into the target.

Get in the right stance

If you are right-handed, then put your left foot slightly forward, take your right hand with a clamped knife back and up. The wrist cannot be bent. You can’t unclench your fingers at the time of the throw either, since they play the role of a pistol barrel - they help guide throwing weapon exactly where planned.

Throw correctly

Directly at the moment of leaving your hand, the knife should not be located horizontally, but at a slight angle to the vertical. Yes, it is precisely due to this that a torque impulse is given to it, which ensures sticking into the target. Therefore, throwing should be carried out when the hand with the knife is somewhere at the level of the head. It is not necessary to squat and throw your hand as far forward as possible, because in this case the knife will not have time to turn 180 degrees and will not be able to stick anywhere.

Actually, everything. Nothing complicated, but only practice will make your skill knife throwing ideal. So take your knives and go into the forest, since the weather is already allowing.