What is tone mode. How to put the phone in tone mode - what is it. Switching to tone mode on the phone
Turning on the tone mode of the phone is necessary to navigate through the menu system when making an outgoing call to the numbers of services and hotlines that provide services. Navigation through the menus of such systems is carried out by turning on the phone's tone mode and selecting the required item by pressing the corresponding key.
All modern smartphones support tone dialing, depending on the platform, it is turned on in one way or another.
Enable dialing
In the Android operating system, you can set the tone dialing. It is indicated in the DTMF (Dual-Tone Multi-Frequency) menu.
We go into the call settings menu and see the following:
About how to enable tone mode phone, you can read in the instructions for the device, in addition, depending on the operating system of the phone, the tone mode is turned on by pressing one or more keys.
If your smartphone runs on the Android operating system, you must perform the following steps during an outgoing call:
- open the main menu;
- select the icon in the menu with the call of the numeric keypad;
- press the required key.
Periodically entered numbers can be deleted using the cross in the right corner. If you entered the command incorrectly, just return to the main menu of the system and select the required item again. Please note that tone mode also works in conference mode, if a call to a tone dialing system is active, all other calls do not support the tone dialing system. Tone mode, depending on the features of your device, supports entering numbers from the touch keyboard and the regular keyboard. If necessary, you can return from the tone dialing mode by opening the icon with an active call in the system menu.
Set on Windows and iOS
Users of modern smartphones on Windows and iOS often wonder how to turn on the tone mode of the phone when making a call to numbers that support tone dialing. To enable tone mode on smartphones with the specified operating system, you need to do several things:
- during an outgoing active call, press the green key;
- select the required number key on the keyboard;
- if necessary, erase the entered data and hide the numeric keypad.
Navigating through the menu systems on numbers with tone dialing support is carried out using the numeric keys, as well as the voice input system, depending on the device of the menu system. Please note that several seconds pass from the moment you enter numbers until the system responds, most often the proximity sensor protects against accidental entry of numbers during an active call, which turns off the screen when you approach your ear. If you need to dial, you need to remove the phone from your ear, turn on tone dialing, enter the necessary command and continue working with the automated system.
You can return to the main menu of any automated system using the asterisk or pound key. If the system is connected to the operator, it is enough to listen to all menu items or select the connection to the operator by pressing the corresponding number key.
By default, all mobile phones support tone dialing, please note that it may not work for outgoing calls to numbers that do not support menu navigation using tone dialing. As a rule, this concerns the phone numbers of hotlines for customer service. Tone dialing can be activated according to the above principle and with an incoming call, if it is active and the automated system supports the tone dialing mode.
You can find out about the availability of tone mode support when making a call by listening to the points of the automated system. If you are prompted to navigate using the phone keys, then the system supports tone dialing. If you have keypad sounds enabled on your device, when you press keys after tone dialing is enabled, you will hear keypad sounds that are created when dialing a number.
Features of tone dialing
Tone dialing on your phone works like a new call during an incoming or outgoing active call to a number that supports automated system navigation using tone dialing. Until the call key is pressed, the entered commands are transmitted to the automated system and recognized by it as commands for navigation.
Please note that touch tone for navigation only works when you make a call to a number with an automated menu navigation system. When making a regular call, tone dialing will allow you to connect a new subscriber to the conversation, send commands to connect services, and record the phone number in the phone book. The tone dialing mode allows you to independently select the necessary items in the automated system when calling a number that supports tone dialing.
Often, when contacting the support service or calling the hotline, the subscriber is urged to switch to tone dialing. Typically, this happens when you try to call a multiline number that requires you to press the numbers on the handset to confirm your selection. Understanding such nuances is not difficult even for a beginner.
What is phone tone mode
Telephone communication is a complicated thing, but at the same time, it is extremely interesting. For this reason, before transferring the phone to tone mode, it is worth understanding its essence, and considering what other set options are available. Telecommunication technologies go far ahead every year, and even now modern devices support only the tone type. For devices released earlier, you still have to make the transition between two:
- pulse, which involves closing the telephone line in a special way, where each dialed digit corresponds to the number of pulses.
- tone, which uses an analog signal to dial the desired combination of numbers.
A user who is not versed in the intricacies of this topic will be able to distinguish these methods of entering numbers by ear. Remember the old rotary phones: when you scrolled the disk, you heard some clicks that differed depending on the number. Some devices, released even 10-15 years ago, still have the ability to switch to a pulsed mode. The other input method will give itself out as a difference in the height of the signal, which will depend on the key pressed. The advantage of tone digital input over pulse is primarily in the speed of dialing and connecting with the subscriber.
Tone mode on a landline phone
With the passage of time and the development of internal telephone networks, the abandonment of the outdated pulse dialing looks quite logical. Feature-rich office phones like Avaya's don't even have a mode change feature. This is understandable, since in large firms work is constantly in full swing, and the speed of dialing to a client or partner is important.
Home devices will make you wonder how to turn on tone mode on your phone. For example, the list of characteristics of the wired model of the Panasonic device says that both options are available. In some cases, pressing the buttons is not enough to navigate between them, and you should contact your telecommunications company for help. It is a mistake to assume that absolutely all radiotelephones, unlike wired ones, have only tone dialing. Voxtel Select series devices support both methods of transferring a telephone number.
Tone mode on mobile phone
Calls to long-distance hotlines, where you have to listen to an answering machine for a long time, are more profitable to make from a mobile phone. Most devices are equipped with only one input method, so the question is how to translate cellular telephone in tone mode does not occur. To switch to the internal line of the desired operator, you will need to press the keys with certain numbers, which is possible only with the tone option. The person dialing the call center will hear a characteristic signal, which means that the connection has been established with the selected operator.
There has never been a pulse connection on mobile phones, since this is a feature of telephone networks for stationary devices, and the modernization of Russian automatic telephone exchanges made it possible to abandon this option forever. However, it may not be necessary to switch between input methods, but to turn on the desired type of connection, turned off for some reason. Without enabling this function, some devices will not allow you to dial a number.
How to put your mobile phone into tone mode
If you answer this question in a generalized way and in relation to each gadget, but the answer here is the same - no way! By default, all phones support and work in tone mode and there are no other options for choosing. However, there are exceptions to the rules: you cannot transfer to another set, but you can simply turn off the existing tone. This guide explains how to switch to tone mode on a touch-enabled mobile:
This algorithm will also be effective for owners of push-button phone models. Here the situation is even somewhat simpler: you do not need to open the keyboard on the screen. Having called the dialed number and having heard a request to turn on the tone input, which was probably turned off, you only need to press and hold one of the keys (usually it is an asterisk, a hash or a plus) until a characteristic signal.
Transferring a landline phone to tone mode
The internal design of home communication devices, like telephone lines, determines the choice of mode change method. In most cases, this can be done without leaving the apartment or private house. How to put your phone in tone mode the classic way described in the following instructions:
Another option is only suitable for some models:
Video: tone mode
September 9, 2013
A landline phone (also called a home phone) can operate in two provided modes of dialing telephone numbers: in pulse and tone mode. By default, home phones use pulse mode. However, sometimes there are situations when it is necessary to transfer the fixed telephone set to tone dialing mode, for example, so that by pressing the keys you can select the number options that the service support service or some other automated system lists for you. Today's article will tell you how to put phone in panasonic tone mode.
Initially, you need to determine what mode your desk phone is currently in. If you hear certain clicks when dialing a number in the handset, this means that the device is operating in a pulsed mode. If tonal sounds are heard that have different pitches, then the phone is working in tone mode.
There are models of stationary telephones that have a certain special button that changes the current mode. Usually this button is called "TONE" or "TONE". To put your panasonic phone into tone mode, use the "+" key. If you are using a panasonic PBX, you should first press the "*" key and then the "#" key in sequence. At the same time, the “T” symbol should light up on the display of the stationary system telephone.
How can I put a panasonic phone in tone mode models KX-TS2365RUW? By default, this machine operates in pulse dialing mode. First, look, a special small lever can be located on the side of the phone, which switches the operating modes of the device. If you did not find such a lever, then use the button with the image of an asterisk, that is, "*". However, in this way you will transfer your stationary device to tone mode only temporarily. Once you hang up, the machine will return to the default pulse dialing mode.
So, in order to switch the phone to the tone mode of the panasonic model KX-TS2365RUW, you must perform the following steps:
A) First press the button called "PROGRAM".
b) After that, press the button called "MUTE".
C) then press the "three", that is, the "3" key.
D) to select the tone mode (that is, "TONE"), press the "unit", that is, the "1" key. If you are interested in the pulse dialing mode (that is, “PULSE”), then press the “two”, that is, the “2” key.
E) then press the PROGRAM button again.
At the same time, please note that the stationary device must have batteries, otherwise, the settings you have set will not be saved and will be deleted after you hang up the phone.
Now if you are asked
There are cases when the subscriber calls to various services or on hotline and hears an answering machine prompt that advises you to switch your phone to tone mode. But not all users are aware of how to complete this process. The article will give useful information for those people who do not know how to switch the phone to tone mode.
Dial modes
The main operating modes of dialing a telephone number are divided into pulse and tone. These systems are the fruit of the development of communication. An earlier form of functioning of the telephone set includes a pulsed mode. Dialing with it is carried out by interrupting the line with a certain list of sounds. Any subscriber will surely remember his calls from a regular phone to another city on a long-distance line.
The tone mode is a later invention and it appeared relatively recently. Its main difference from the impulse one is that a deliberately selected sound is intended for each digit. Attention should be paid to the fact that all modern models telephone sets are produced taking into account the use of this feature. The pulsed mode for such models is a thing of the distant past. But despite such innovative approach Still, phones with classic features are popular to this day. Therefore, if you need to switch to tone mode, you should clarify whether the menu of your device suggests it.
Examination
To find out if the desired function is enabled, pick up the handset of the phone and press any key. You must determine what kind of sounds are coming from your machine. If short beeps are heard, this indicates that your phone has been switched to the tone mode system.
If it is possible to recognize sounds similar to clicks, then the device undoubtedly works in a pulsed mode. The last option limits a number of functions. How to transfer the phone to the tone mode we need, we will discuss further.
Process
Press the "*" button on your device - this is the easiest way to switch your device to tone mode. This method is only effective if the menu provides such a function. Not every phone model involves a simple button press. Hold and hold the "*" or "#" key for a few seconds. The word “tone” or “t” should appear on the scoreboard of your phone. If the display shows absolutely nothing, then you should again listen to the sounds made by the handset while pressing the buttons. Some models are equipped with special keys "T" or "P", which are located on the body. They were created to translate the radiotelephone from pulse mode to tone.
There are others individual actions for this setting. They are specific to some models. The switching method can be a combination of buttons "*" and "-" or "-", "*", "-".
Nothing came up
If none of the above methods of switching to the tone mode of the phone does not work, then it is recommended to refer to a detailed study of the menu of your device. Many models are subject to translation through it. Enter the settings and refer to the "Switch between modes" option. Select the way you want to work and confirm your action.
We have dealt with the concept of tone mode, but in the end, we should tell a little more about the pulse mode. First of all, this is how phones with a rotary dialer work. Pulse mode is a dialing method by which digits are transmitted to the station by stepwise closing, and then opening the selected telephone line.
There are times when a subscriber calls various services or a hotline and hears an answering machine offer, which advises you to switch your phone to tone mode. But not all users are aware of how to complete this process. The article will give useful information to those people who do not know how to switch the phone to tone mode.
Dial modes
The main operating modes of dialing a telephone number are divided into pulse and tone. These systems are the fruit of the development of communication. An earlier form of functioning of the telephone set includes a pulsed mode. Dialing with it is carried out by interrupting the line with a certain list of sounds. Any subscriber will surely remember his calls from a regular phone to another city on a long-distance line. The tone mode is a later invention and it appeared relatively recently. Its main difference from the impulse one is that a deliberately selected sound is intended for each digit. You should pay attention to the fact that all modern models of telephones are produced taking into account the use of this feature. The pulsed mode for such models is a thing of the distant past. But, despite such an innovative approach, still phones with classic features are popular to this day. Therefore, if you need to switch to tone mode, you should clarify whether the menu of your device suggests it.
Examination
To find out if the desired function is enabled, pick up the handset of the phone and press any key. You must determine what kind of sounds are coming from your machine. If short beeps are heard, this indicates that your phone has been switched to the tone mode system. 
If it is possible to recognize sounds similar to clicks, then the device undoubtedly works in a pulsed mode. The last option limits a number of functions. How to transfer the phone to the tone mode we need, we will discuss further.
Process
Press the "*" button on your device - this is the easiest way to switch your device to tone mode. This method is only effective if the menu provides such a function. Not every phone model involves a simple button press. Hold and hold the "*" or "#" key for a few seconds. The word “tone” or “t” should appear on the scoreboard of your phone. If the display shows absolutely nothing, then you should again listen to the sounds made by the handset while pressing the buttons. Some models are equipped with special keys "T" or "P", which are located on the body. They were created to transfer the radiotelephone from pulse mode to tone mode. 
There are other individual actions for such a setting. They are specific to some models. The switching method can be a combination of buttons "*" and "-" or "-", "*", "-".
Nothing came up
If none of the above methods of switching to the tone mode of the phone does not work, then it is recommended to refer to a detailed study of the menu of your device. Many models are subject to translation through it. Enter the settings and refer to the "Switch between modes" option. Select the way you want to work and confirm your action.
We have dealt with the concept of tone mode, but in the end, we should tell a little more about the pulse mode. First of all, this is how phones with a rotary dialer work. Pulse mode is a dialing method by which digits are transmitted to the station by stepwise closing, and then opening the selected telephone line.
What is the tone mode of a landline phone?
Fixed (wired, home) telephones for their intended purpose are now used less and less, giving way to mobile devices based on radio communication. Since the latter in most tariffs do not require a monthly subscription fee, the cost of their use is even lower than that of stationary counterparts. At first glance, it may seem that no questions can arise when using wired telephones, since the technology is old and well-studied. But this is true for the developer, and not for a simple user of such a phone.
For example, sometimes companies and banking institutions indicate in their contact details a free phone number, by calling which you can resolve many issues. Usually, on the other side of the wire, the answering machine picks up the phone, during the conversation asking the subscriber to press certain numbers (turn the dial). Alas, for many, the call ends here, since the answering machine does not react in any way to actions with the phone, ignoring button presses. Why?
The reason is simple - there is a pulse and tone mode of the phone. Surely, everyone has heard strange clicks or beeps that accompany pressing numbers or dialing a number using a dial. Beeps are tone mode, and clicks are pulse mode. Consider how dialing occurs in old rotary telephones.
When the disk is rotated to the required distance and automatically returned to its original position, special electrical contacts are closed: each closure generates a click-impulse, counting their number, you can determine the dialed digit and, accordingly, the number. This "counting" is carried out by the equipment at the station (ATS). Simple and effective. In newer phone models, the contacts are replaced by a special pulse generator, which, by the way, can also be switched to tone mode.
Subsequently, the pulse dialing was replaced by a more technological tone (tone). In it, dialing is carried out not by digits, but by modulating alternating current with the desired frequency. Each digit (button) has its own signal tone. Further, everything is similar: the PBX perceives a combination of tones and converts them into a dialed telephone number. The tone mode is more noise-resistant (errors in dialing now completely depend on the owner's attentiveness, and not on the state of the network), and also allows you to connect to the subscriber more quickly. All modern telephones are tone-tone, pulse mode may be completely absent in them.
By the way, it is believed that the tone mode provides more high quality sound. This is only half true. To work in tone mode, it must be supported by both the phone and the PBX. Trying to use the new phone on a pulse PBX will not provide any benefit (if it works at all). Stations rated for tone mode are digital (or mixed) as opposed to analog pulse. Hence the improvement in sound.
A programmable pulse generator allows you to switch the phone to tone mode and work with both pulse and tone communication networks. Let's assume that the subscriber is served by analog automatic telephone exchange. To put the phone into pulse dialing mode, it is usually necessary to press and hold the "*" (asterisk) button for a few seconds. If this does not help, then we turn the device over and study the bottom cover - often there is a small toggle switch for selecting the mode. Switching to tone dialing is performed in the same way.
Now back to the example given at the beginning of the article. Owners of rotary telephones connected to analog stations can forget about communicating with an answering machine that requires pressing any buttons, since without additional equipment it's impossible. Of course, there is a way out - this is a special prefix that generates tones in the network, but you will have to forget about convenience.
Do you know how to put your phone in tone mode?
Many of us at least sometimes have to call multi-channel telephones to various hotlines. It is easier to do this from a mobile phone, but sometimes more expensive, because the operator starts counting money from the beginning of the connection. First, you listen to an answering machine message that prompts you to choose which specialist to connect with, and then in some cases you will have to spend more than one minute on the line, waiting for the operator to answer. In this case, it is more profitable to use a stationary device, but in this case it is necessary to decide how to switch the phone to tone mode.
Phone modes
There are two options for the phone - pulse and tone. Conversation on a multichannel number is possible if you turn on the tone mode. Older phones and PBXs support pulse dialing by default. Modern digital PBXs and more advanced telephone models - tone. You can determine how your phone is set up by default if you put the handset to your ear and listen to the sounds in it while dialing:
- With a phone set to pulse mode by default, you will hear characteristic clicks, the number of which corresponds to the dialed digit.
- In tone mode, a characteristic sound signal will be heard in the speaker.
If you heard the sounds described in the first case, in order to call the hotline, you need to learn how to put the phone into tone mode. However, it should be noted that the owners of rotary telephones will not be able to do this without purchasing additional equipment.
How to find the manual for the telephone
First of all, when we need to learn a new function of a thing, we turn to the instructions. It comes with every piece of equipment. In it you can find a lot of very useful tips, including how to put the phone in tone mode. If the user manual is lost along with the box or it was not there initially, you should use the tips suggested later in our article.
The easiest way to put your phone in tone mode
Sometimes, for objective reasons, it is impossible to find the user manual, or it may contain only technical description models, and the functions are disclosed very poorly. In this case, use a simple and proven way to switch to tone mode.
After you have dialed the number and you are connected to the answering machine, press the star (*) and hold it for a couple of seconds. Usually this is enough to immediately switch to the desired mode. If the transition did not work, then you should try again. If the transition procedure was successful, you can enter any extension numbers. However, each time you call, you will need to do this procedure.
Panasonic phone tone mode and its features
Earlier than other companies, Panasonic specialists thought about introducing a tone mode in their devices. It is no secret that its spread everywhere remains only a matter of time, all large quantity PBX use digital technologies, and organizations create multichannel numbers for convenience. Before putting your Panasonic phone into tone mode, examine the device carefully. On some models, you may see a "tone" key or a "pulse-tone" switch. The switch must be set to "tone" mode, and the key is simply pressed.
Modern radiotelephones of this brand are programmed by default for touch-tone mode, and advanced settings most often it is not necessary to enter. If the program is broken, then with the help of the instructions it is easy to fix it.
What does it mean to put the phone in tone mode?
earlier on landline phones and now there are 2 dialing modes - pulse and tone
first, the pulse mode appeared, this is 1 click number 1 2 clicks number 2, etc., etc. ...
then later the tone dialing mode appeared, it is faster than the pulse dialing in the tone mode, it is much faster to dial numbers and various telephone operator services are supported only in the tone dialing in the pulse dialing are not supported
if you have a fixed telephone, then there are usually 2 dialing modes - tone and pulse
many old PBXs, GTSs do not support tone mode, only pulse mode, 10 years ago they did not exactly support village, rural PBXs
those. this is already a thing of the past transfer from pulse dialing to tone
for example, if a subscriber has a PBX connected to the station in a pulse dialing mode, then he cannot dial a number in tone dialing and vice versa
sad roger
Normal dialing is impulse dialing. It has remained since the days of disk devices, when each digit corresponded to its own number of pulses.
There are no more disks in modern devices, but they still have compatibility with old networks, that is, by default they also send pulses when dialing, and not tones. To switch to tone mode (to, for example, select menu options for various services, call cards, etc.), you must either move a special switch, if any, or dial an asterisk *.
In the west, there is no more pulse dialing; there, dialing immediately goes in tone mode. When each digit corresponds to a signal from two specific frequencies.
Mikhail Belodedov
Pulse dialing of a telephone number is the first thing that came to telecommunications to replace the "ladies on the switchboard". The dialer disk, rotating (reverse), briefly breaks several times telephone line. One gap - number 1, two - number 2, etc. Simply and easily. A minimum of complex technology. Accordingly, automatic telephone exchanges are needed that decode these short-term interruptions and establish the necessary connection. These automatic telephone exchanges have become very widespread - these are decade-step automatic telephone exchanges. The main disadvantage of pulse dialing is a significant duration.
With the development of electronics, a tone (or tonal) set entered the arena. No line breaks. A special signal is transmitted along the line, which the PBX interprets as a digit of a telephone number. A pair of non-multiple frequencies is used as a signal - hence the name Dual Tone Multi-Frequensy (DTMF). There are 8 such frequencies in total - two sets of 4 each. It is they who are heard in the handset when dialing a number. Modern PBXs use tone dialing as the main mode - because it is much faster. However, the ability to use the old, pulse dialing is almost always left in order to be able to use old telephones. On modern devices, as a rule, both dialing modes are provided and a special switch is made - either physical or software.
Matvey628
Until recently, absolutely all telephones were analog, that is, dialing was carried out by sequential dialing of numbers using a rotating dial. However, with the advent of the first digital switches and telephones, dialing in the form of analog signals lost all meaning.
However, a huge number of analog telephones did not allow a quick transition to new format. Therefore, in most digital telephones, the function of switching from one mode to another was provided. Tone mode was intended just for digital devices and switches, and differed in that the digits of the number differed not in the number of clicks when dialing, but in the pitch, individual for each digit. This is what is meant when it is said that the phone needs switch to tone mode.
Tone mode, as a rule, is needed to connect to an extension without the help of an operator. Most often, to switch to the tone mode, you need to press "*", after which you can enter the internal number of the subscriber.
How to put the phone in tone mode?
Captain obvious
If the phone is equipped with two dialing systems - tone and pulse, and at the same time works in pulse mode by default, there are two options for switching modes. One of them is mechanical, with a microswitch on the phone case marked T and I.
The second option is simpler - just press the button with the asterisk sign when the handset is lifted.
There are also phone models in which dialing modes are switched through the phone menu - here you will have to read the instructions for this phone model.
Matvey628
The question, for many young people, does not make sense at all, since they have only dealt with mobile phones in which this mode is set by default.
As for older people, they still remember analog phones that had a spinning dial for dialing. Digital phones that appeared later had two dialing modes: traditional and tonal. During tone dialing, sounds of various pitches are heard, each of which corresponds to one digit. To put your landline phone on touch tone you must either press the asterisk *, or set the tone switch to tone mode. The mode switch is usually located at the back of the telephone where the wire connects.
Zolotynka
Most wired telephones, as well as many older models, are indeed switched to tone mode using a slider, which is usually located on the bottom of the telephone, or on its back wall. This feature is labeled Tone / T and Pulse / P. Move the slider to the T position and the phone will work in tone mode.
Not everything is so simple with new phone models. The desired function can be "hidden" somewhere in the phone menu and in order to use it and switch the phone to tone mode, you should carefully study the instructions. For different models, the setting may vary significantly.
pistol
By default, the tone mode is already on the phone. It all depends on the firmware of the phone; there are a lot of touch and simple ones. During the conversation - this is when the connection has already gone, press * (asterisk) and just wait for the mode change. This action is suitable for almost all telephones.
dolphinica
Some early mobile phones still offer to switch the phone to tone mode. Other mobile devices already set to tone mode.
if you want to change the mode yourself, then press the asterisk and hold.
Dёm to a
You can switch on the phone using special buttons, but usually it is enough to hold down the asterisk. But I always had to do this through the phone settings, in the "sounds" tab - everything is simple and clear there, just check / uncheck the box or select the desired mode and that's it. Therefore, there is nothing complicated in this, most importantly, choose the most suitable and convenient way for yourself.
Hunt nickname
The phone has two modes - tone and pulse. In pulse mode, when you press the buttons, clicks will be heard. If the tone mode is selected on the phone, short beeps will be heard when pressed. Most phones have an easy way to change from one mode to another. You just need to unlock your phone and hold the star until the mode changes.
First you need to determine in which mode the phone operates, in tone or pulse.
If clicks are heard after pressing the button, then the mode is pulse, if short signals are heard, then tone mode.
Press the button on your phone * " (asterisk) - this method of switching to tone mode is suitable for most devices.
Athanasius44
At work, to switch the phone to tone mode, just press the * button, under it below and the inscription is made in English tone.
And on a home phone for switching to tone mode, there is a key on the back of the device.
Chipmunk
You have to make a lot of calls throughout the day. And very often, to get through to the operators through the answering machine menu. you have to put your phone in tone mode. To do this, I usually click on the button with an asterisk - *
To translate home phone to tone mode you have to press an asterisk when the handset is up. In some phone models, you need to translate through the menu. BUT mobile phone It is not necessary to translate - it is already in tone mode.
How to put your phone in tone mode. Phikips phone. Pressing "*" does nothing.
Pavel ronzhin
Instruction
1
Determine which mode your machine is in, tone or pulse. To do this, listen to what sounds your phone makes when dialing a number. If clicks are heard after pressing the number, then the mode is pulsed, and if there are short tones, then tone.
2
Having determined the operating mode of the device, switch the phone from pulse mode to tone mode using one of the three methods below.
3
Press the "*" button on your telephone - this is the easiest way to switch the device to tone mode, provided that your phone is switched in this way.
4
Find on your phone buttons "P" and "T", they can be on the side of the device, or below. If there are such buttons, then the phone is switched to tone mode with their help. Press the "T" button to switch to the desired mode.
5
If both methods are not valid for your phone, refer to the instructions that came with the device. Some models of devices are transferred to tone mode with completely different keys.