How to assemble a tent: tips from experienced tourists. How to assemble a tent? Tips for beginners

01.10.2019

There is often confusion, especially among inexperienced hikers, when picking up and folding the tent. It is important to disassemble it correctly so that the design is compact, does not take up much space and fits into the case. The figure-eight folding principle helps a lot for compact storage and easy carrying. A video and a detailed diagram will clearly show how to assemble a tent with a figure eight.

How to assemble a figure eight tent - Scheme

winter tent

Winter tourist tents come with an external and internal frame, as well as with locks and Velcro. Velcro designs are slightly different from the usual ones. To fold this type, it is necessary to close all the locks, Velcro, and then press one of the corners inward to make a kind of book. Then it must be positioned in such a way that one of the corners is turned “on itself”. The lower ribs should be pressed to the floor, and the upper ribs should be tilted forward and down, and then packed in a bag.

A tent with an inner frame, i.e. with arcs hidden under the awning, you need to disassemble as follows:

Remove all pegs around the perimeter of the structure.
Remove the awning and dry well, pull out the arcs, fold them separately.
On the ground, fold both layers together, seam to seam, roll into a tube. You can put the inner layer on top of the bottom and twist. If the folded tent does not fit into the bag, it has not been assembled correctly.

The structure with an external frame (the arcs are located on top of the awning) is assembled in a similar way: all the pegs are removed, the awning is removed, the arcs are pulled out, the structure is folded.

How to assemble a fishing tent figure eight

Before assembling the fishing tent, you need to take out all the things from it, then fold it flat. Stepping on one of the sides, you should give it a vertical position. Then you need to take hold of its top and start twisting 180 degrees. In the process of twisting, a ring will be obtained, which must be bent down to the floor. At the same time, a ring is also formed on top, which should then be folded with the bottom. After that, the tent is easily placed inside the cover.

How to assemble a children's tent figure eight

Children's play frame tents are assembled in just a minute, but sometimes it is not so easy to fold them to place them in a cover and free up space in the room. Correct assembly is as follows:

It is necessary to stand in front of one of the walls of the toy house, holding hands on two opposite ribs.
Then you need to connect the edge that holds right hand to the opposite end.
The resulting plane must be taken with your hands in its lower third so that the roof of the house is “away from you”. Now you need to bring one hand behind the other so that the edges of the tent folded into a figure eight.
The circles of the resulting figure eight need to be superimposed on each other, so they form a ring that can easily fit into the factory case.

The triangle house is folded as follows: holding one of the sides facing you, you need to insert one of the ribs inward, pushing towards the opposite. Then the entire panel must be pushed inward, achieving a flat shape. At the same time, an elastic band, which is located at the bottom, should remain outside. Then, twisting the top and middle of the house, you need to make a figure eight. Having received a circle, fix it with an elastic band and fold it into a case.

How to assemble a Chinese figure eight tent

Chinese tent

Chinese tents are very popular among tourists due to their ease of assembly and ease of use. But sometimes the information on how to assemble a Chinese tent provided by the manufacturer is not clear to everyone. Often the difficulty lies in the fact that many do not know how to start folding. To do this, you need to fold the two side faces together. It is easier to assemble with two people, but if there is no one nearby, you can hold the second sidewall with your foot. The final moment of assembly is the twisting of the oval into a compact circle.

How to assemble a tent

An automatic tent has an advantage over a conventional tent: the construction of a springy steel base covered with polyester is very easy and quick to assemble.

To assemble the tent-machine, you must follow the instructions:

Fold it in such a way that it takes a flat shape. To do this, you need to fold all the sides into one.
Place the tent on the floor, then pull one of its ends towards you to press it against the opposite edge of the plane.
Its arcs will take the form of a figure eight, which must be twisted in such a way that a circle is obtained.

In order for everything to work out in nature as it should, you need to try several times to assemble and disassemble the automatic structure of the house.

Children are very fond of building houses from any material at hand: chairs, armchairs, sofa cushions, blankets and rugs are used. In such houses it is so wonderful to play with dolls, hide from the evil Baba Yaga and turn on a flashlight in the dark.

One thing is a pity, this house is not strong. One move and the roof is already broken. And then the walls along with it. The kids are upset. But the parents are excited: how safe is such a house?

An excellent way out was the children's play tents that appeared on sale. Lightweight and durable, they can look like a real castle for a princess, a house with a tunnel, or even a car.

As a rule, they are installed in just one movement. But collecting them after the game is not so easy. How to fold a children's tent to put it in a small bag? So there is such a tent in the corner of the room for months. Or on the balcony.

But the inscription on the cover states that you can pack a play tent in a cover in one minute. What are we doing wrong? Let's figure it out together.

What is a children's frame play tent?

Such tents can have a different appearance - ladybug, round house. But all of them are very similar to ordinary tourist tents, installed using a tubular frame.

The tubes are assembled into longer ones, pushed into the grooves of the cloth of the house and fixed in special pockets or tied with ropes.

It’s easy to disassemble them - untie the fastening ropes, remove the frame and fold the canvas itself. The tourist tent is assembled a little longer, but only because of the large dimensions.

What is a wire children's tent?

The situation is quite different with wire play tents. At the heart of the frame is a thin and strong wire.

Installing one really takes one minute: you just need to get it out of the package and unfold it. Thanks to the elastic wire stiffeners, the tent itself takes the desired shape.

But not everyone succeeds in putting together a tent the first time. Probably because parents are afraid to damage the stiffeners or do something wrong. If your house does not have assembly instructions or you can’t figure it out in any way, try using our algorithm of actions.

How to fold a children's square tent-house: step by step instructions

Stand facing the wall of the house (any) and grasp the ribs on both sides of it with your hands.
The edge that you hold with your right hand (or left, if you are left-handed), push forward - to the opposite corner.
Now the house looks like a book, which you fold, closing the pages.

Hold the folded house by the side ribs in their lower third (“floor” towards you, roof away from you). Move your hands with each other, as if turning one on the other. In this case, the wire ribs will fold into a figure eight when you join your hands.
Place the two "heads" of your figure eight on top of each other.
In your hands, the house formed a ring. Now it is easy to put away in a round case.

The video will illustrate the addition process in more detail:

If the figure eight is not given to you or the design of the house does not want to develop in this way, try another option:

Put the flat house folded into a “book” on the floor or any other surface.
Bring the lower part ("floor") up - to the "ceiling". Right hand holding lower part house, while the left side holds the sidewall in the middle of a rigid wire rib.
Gently press the side against the top. Landmark - the right hand is in the center of the upper part of the house. Here, pull the sidewall to it.
Since the tent has stiffeners, when folded in half, the house has rounded sides. Folding the side part, turn it a little, like a steering wheel, around its axis.
Press it, too, with your right hand, turning it into a ring.
The second half is placed on top of the first.
You have a comfortable circle in your hands again. Put it in a case.

And a couple more detailed videos on folding a square children's wire house, in the second, the process of folding the frame into a circle is presented in a detailed slow-motion version:

How to fold a children's triangular tent: a detailed algorithm

This house is more appropriate to call, rather, a pyramid. Stand facing one of its sides. Insert one rib inward, pushing to the opposite.
Tuck all parts of the panel inward towards the center and get a flat triangle.
The elastic band located on the bottom of the house must remain outside.
Grasp the top of the triangle and the middle part of the base. rotary motion hands making a figure eight, connect both hands.

OR press the top to the base. The side parts of the resulting structure, as in the case of a tent-house, will become rounded. Wrap one circle to the center of the base. The second will develop on its own.
Secure the resulting circle with an elastic band.
You can put the folded tent in the bag.

The folding algorithm is even more clearly presented in the following videos:

How to assemble a children's round tent "Princess Castle": a scheme of actions

Can such a large and luxurious castle also be hidden in a small round container bag? Exactly.

Princess Castle belongs to the category of frame tents, which are assembled according to the principle of adult tourist.

Remove the upright stick from the frame. They hold the tower cylinder upright.
This long stick consists of several small ones, worn with an elastic band. Stack them up.
Do the same with the rest of the sticks of the frame of your castle.
You are left with a round base and a round top part towers. Connect them to each other. Tuck the cylinder head inward.
Grab both sides of the circle with both hands. And again make a figure eight - turn one hand down and the other up.
Connect the two circles of the eight.
With an elastic band attached to the base of the tent, secure the resulting structure. The castle is ready to "hide" in a round case.

How to assemble and remove a tent-bus, car, train and other "unearthly beauty"?

As you probably already understood, all children's tents, regardless of their appearance, are added according to the same principle. The scheme of your actions is the same in any case: connect the side faces, get a flat figure and twist the figure eight out of it with a light, graceful movement.

The figure eight also needs to be folded in half and - voila - the tent is folded!

Lay out the tent on the ground so that you can see all 4 corners. Then apply parallel corners, folding the tent in half. Then do the same, only with other corners. And so on until the tent folds into a figure eight.

Here is a visual diagram:

Folding the tent with an eight is very convenient and actually not so difficult

In order to fold the tent in this way, you must first fold the tent step by step as shown in the diagram, and then twist and fold again.

And here is another diagram for better understanding:

When we bought a tent for our daughter, the saleswoman in the store showed us how to assemble it with eightquot ;. At first glance, everything was clear to us, but when we faced this problem at home, we realized that not everything was as simple as it seemed to us at first glance. This video helped us a lot.

Folding a tent in a figure-of-eight is not as difficult as it seems at first glance. Here are a few options for pictures - diagrams that will help you figure out this not tricky business. Here is an option for a triangular and square tent. The principle of folding they have the same in terms of twisting.

It's actually very simple. I will try to explain in words. In the past, in childhood, we had such hats, the brim of which was folded into a figure of eight and the hat was put away in a small bag. It turns out that the same folding principle applies to children's play tents, of which there are now a great many.

The tent must first be folded into a rectangle. To do this, we connect the diagonal corners together, as if investing in each other, and then fold the resulting triangle in half, we get a flat rectangle (or square). Now we take this rectangle for diagonally opposite ends - for the upper left corner with the left hand, for the lower right corner with the right hand. And now at the same time we turn the hands in different directions, left from ourselves, right towards us. The tent will roll into a circle of its original size and fit into the cover. Perhaps a few long description but it's actually very simple.

Even one person can cope with the layout of the tent, you just need to assemble and disassemble it yourself several times in order to remember the technique and in the future independently lay out the tent with a figure of eight. Even in harsh winter weather can be easily dealt with. The scheme is simple (especially when it comes to semi-automatic tents):

Right here in the military)))

He folds two tents (summer and winter), everything is clear, but so cunning in fact, but at the same time simple that it’s hard not to think of it on your own.

I will show several schemes for folding the tent with an eight. But most importantly, before you do this, you need to lay out a tent on the ground evenly, so that you can see all the corners and then you will see the next steps on the diagrams. Here are examples of folding a tent.

People who have had a good rest in nature are often faced with quite unpleasant situation. Time to return to the city, all the small attributes are collected and packed in the car active rest: fishing rods, cages, spoons, plates, food leftovers, garbage to throw it in the trash, and not leave it in the forest or on the shore of a beautiful reservoir. It remains to roll up the tent. In the factory packaging, it almost fit in the glove compartment, but how to return it to these dimensions, because, although it is light, it is quite voluminous? And the wire frame, at first glance, will not allow.

The first thought is that the factory knows a tricky secret of how to do it, or special packaging machines roll up the tents. After all, you’re more likely to break something with your hands, or you’ll dislocate your fingers. In general, it is more like a puzzle and most tourists simply stuff a half-folded tent into the trunk and, upon arrival home, put it in this position against the wall of the pantry.

It turns out there really is a secret. The author of this short video reveals it with pleasure. Nothing will break there, you just need to correctly apply a completely non-exorbitant effort and the wire frame will almost independently curl into a figure eight, and the tent itself will once again be ready to fit on a few square centimeters. Watch the video "How to assemble a figure eight tent, scheme" in good quality 720HD. All materials of 2017 and 2018 are contained on Youtube.com and are available on our website without registration.

with inner frame (the most common type of tents) done in five simple steps:

We spread the inner tent on the ground.
We assemble the arcs and insert them into the eyelets at the corners of the inner tent (eyelets are the tailor's name for metal rings embedded in the fabric).
We hang the ceiling of the inner tent by the hooks. At the same time, to make it easier and nothing slides down, we start from the topmost hook.
We throw an awning on the resulting structure and fix it at the ends of the arcs. As a rule, this is done using the same eyelets or trident buckles. Tighten the adjusting straps if necessary.
Everything, in principle, the tent is assembled. It remains only to attach it to the ground:

All in all, about 5 minutes.

At first, to make it easier, you can do the assembly together. But in general, with minimal skill, almost any modern tent is easily assembled by one person.

Tent with outer frame going even simpler ().

What to look out for

arcs

Due to the fact that the tubes that make up the tent arcs are interconnected with an elastic band, everything is assembled very easily and quickly - one section literally jumps into another. However, sometimes a mote that has fallen does not allow them to fully enter one into the other - and this is the most common reason for the breakdown of the frame, if then it is well loaded. So it's worth once again checking the density of these compounds with a glance.

Pegs

It is better to stick the pegs not vertically, but at an angle. So they will stay in the ground stronger.

Location selection

It is desirable to put the tent on a flat, smooth and dry place. Of course, this is not always possible, especially in mountainous areas, but we must strive.

Almost any natural site has a slight slope in one direction or another. First of all, you need to try to set up the tent in such a way that you can sleep in it. head up the slope. The position of the body, when the pelvis is slightly higher than the head, is perceived by most people as clearly uncomfortable and uncomfortable for sleeping. Leaning to the side should also be avoided if possible. From the point of view of direct comfort, it is less critical, but tossing and turning in a dream, you will slowly slide down the slippery bottom of the tent, and in the morning the last person often finds himself tightly pressed against the wall by the bodies of his comrades .

In addition, it is advisable to choose under the tent level ground, without tussocks or protruding spruce roots. It’s not very sweet to sleep when something sticks under your side all night. And of course, you won’t be able to wake everyone up in the middle of the night, get out and rearrange everything to a new place. So all branches, small pebbles and cones are immediately down. Moreover, it is desirable during the assembly of the tent, while it is not yet pinned with pegs, try to lie down in it and lie down. And thereby test that the slope is where you need it and nothing sticks under your back.

And lastly, you should always think about what will happen, if it rains. Although all modern tents are equipped with a waterproof bottom in the form of a "trough" and are quite well protected from water leakage. But still, it is somehow exciting when a champing puddle slowly grows around your home. And you with all your dry things are separated from it by only a thin layer of fabric a fraction of a millimeter thick. Where is the little hole? Plus, things in the vestibule will naturally get wet. So, when choosing a place for your tent, always try to imagine where the stormy streams will flow in the event of a downpour. Often only a couple of steps to the side, a small five-centimeter elevation is enough to stay completely dry.
.

In my childhood, when a backpack “kolobok” with a burned-out cotton sleeping bag inside was a familiar tourist companion, so that water would not leak under the canvas bottom of the tent, it was dug in every time with a small drainage ditch. But now this is a rare occurrence. Thanks to mass distribution tents made of modern waterproof fabrics, almost no one does this anymore. Only if you have to stand in one place for a very long time, a week or more.