Russian firmware for samsung galaxy s4. Firmware for Samsung Galaxy S4. Standard software update

22.08.2021

Instructions for installing the official single-file firmware on the Samsung Galaxy S4 (GT-I950x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy S4 and return the phone state ("Settings" > "About device" > "Properties" > "Device status") to "Official" after switching from custom firmware and thereby return the ability to receive updates over the air is enough follow the instructions provided.

Installation instructions

Unzip the downloaded archive to a folder with Odin PC for convenience. The file in ".tar" or ".tar.md5" format must be left, but "SS_DL.dll" can be deleted.

Perform a data reset on the device.
To do this, go to the settings on the tab " Accounts» to the section « Archive and reset”, select the item “ Reset device” and press the button “ Delete everything". The phone will reboot.

Run Odin PC as administrator.

Put the device into download mode ( Download Mode).
To do this, simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin, the inscription " COM».

Click on the button " AP» and select the TAR archive of the firmware.

Items « Auto Reboot" and " F.Reset Time" must be activated, a " Re-Partition", if active - must be disabled.

Click on the button " Start". The firmware installation process will begin.

At the end of the operation, if everything went well, the message “All threads completed. (succeed 1 / failed 0)". The phone must be rebooted manually by holding down the power button until the screen turns off. The initial boot of the device may take up to 5 minutes.
ATTENTION!
If the device does not boot for a long time or a data reset has not been done, it must be performed from the recovery.
To do this, simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading select " Wipe data/Factory reset", and then - " Reboot system now". If after these steps the device also freezes at boot, you need to reflash it again.

Sooner or later, a moment comes when even a mobile device like the Samsung GT-I9505 Galaxy S4 can become obsolete. In such cases, you can improve the performance of your smartphone with firmware.

Why do you need firmware?

Increasing gadget performance- thanks to the software update, you can improve the technical parameters of the phone, improve the quality of pictures from the camera and increase the processor of the gadget;

Device troubleshooting- sometimes even the most high-quality and popular models of mobile devices have flaws in the software. Thus, you can get rid of errors and various other glitches;
Expanding the functionality of your phone– you can significantly increase the functionality of the mobile device.

How to flash GT-I9505?

If you follow all the instructions for the firmware listed below, then in the very near future your mobile device will significantly increase its functionality.

Charge your smartphone;
Create a directory on your hard drive to upload files. An important point is that the name of the catalog should not contain Cyrillic characters;
Download all the files needed for the firmware. Before downloading, it is recommended to disable the antivirus;
If on your personal computer, then it should either be deleted or disabled (to do this, launch the task manager using ctrl + alt + del combinations of numbers and end all processes marked with Kies);
Install the necessary drivers, or rather SAMSUNG USB Driver for Mobile Phones v1.5.29.0.exe;
Extract the files from the archive to the directory you created earlier. To do this, download and unzip Odin3_v3.09 and I9505XXUFNA1 (firmware for Samsung Galaxy C4);
Your next action will be to launch your mobile device in Download Mode. To do this, turn off your smartphone. Next, press the key combination "Power", "Volume down" and "Home". After you see the pop-up window, press the "Volume Up" button. If you saw a green robot on the display of your phone, then you did everything right;
Connect your smartphone to a personal computer;
Launch Odin3 v3.09;
In an open program, you must go to the PDA. Next, you need to find and select the I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar.md5 file. The important point is that the re-partition checkbox should NOT be checked;
Click on the "Start" button;
After installation, you need to start the gadget in recovery mode (this can be done using the key combination "Power", "Volume up" and "Home"). Next, you need to perform the wipe / factory reset action;
Restart your smartphone.

Conclusion

It should be noted that all the files necessary for the firmware must be installed over the original version of the mobile device software.

If everything has been clear with the Galaxy S3 for a long time, it's time to figure out a little about which firmware is best for the current flagship Galaxy S4. This year this smartphone will receive its latest Android update and for this occasion it is necessary to decide on fallback options, so to speak with alternative software solutions. And that's what we advise you, the owners of the Galaxy S4.

The most popular and newest games for android. Free download.

A warning: before jumping into the pool, check that you have chosen the correct firmware for the correct version: GT-i9500 for the standard version of the smartphone, and GT-i9505 for the 4G model.

PAC Man 4.4.2

PAC-Man is one of those firmware that is gaining more and more authority and popularity. This firmware combines many features of ParanoidAndroid, CyanogenMod and AOKP. The Galaxy S4 i9500 version is based on Android 4.4 KitKat and still needs to be fixed, but the latest i9505 version is considered more stable because it uses Android 4.3 as a base.

Android V2.0

Those who are used to TouchWiz should turn their attention to Lidroid. At its core, this firmware uses the official Android 4.4.2 and combines all the basic gadgets of Samsung, such as a theme editor and an excellent file manager.

MIUI

You are probably wondering why we mentioned this already well-known firmware? Probably because the screen of the Samsung Galaxy S4 and the MIUI color scheme are perfectly combined with each other, since this firmware was specially created for smartphones. If you like large icon sizes, then MIUI is for you.

Prism Barebone

Prism Barebone is based on Android 4.3. The ROM is very stable in its operation and allows you to choose between TouchWiz and pure Android design. All pre-installed applications have been removed, but Samsung widgets have remained in its composition.

Cyanogen Mod 11

CyanogenMod has become the most popular and most traditional custom firmware. It is stable, reliable, and most importantly, updates appear regularly. If you do not know where to go, then SM will be a win-win choice. There is a version for both Galaxy S4 I9500 and S4 4G I9505. The most stable version is CyanogenMod 10.2, based on Android 4.3.

Hello everyone, in this post I will show you how you can flash (update software or reflash), get root rights (rooting or rooting), install CWM (custom or non-factory recovery) and perform a hard reset on your smartphone Samsung Galaxy S4 GT-I9500 16Gb.

It so happened that I had to use it for a whole week at work. If you compare it with mine, then I practically didn’t notice the difference, it’s also stupid in the drain, there are also a lot of applications that are useless for me, but there is one thing - my build quality is better.

And so, when updating the software, I will use the usual factory firmware of the latest version with Android 4.4.2 , in this article I will not install custom (modified by other "specialists") firmware versions for the reason - well, I don't like them. For about six months I had a non-official firmware on SGS3 - I did not like it. It can be seen that people make them "for themselves." I put the stock back and rutanul. Everything suits me. I need ROOT rights to remove all applications that I do not need and to install programs that need these privileges. I won't go into detail about this. In the following articles.

As for operation, I can only say one thing - the most important jamb of this phone is the battery - it swelled up this week. This is a factory marriage (more precisely, a miscalculation). When used, its consumption is 0.7 amperes, and therefore, with prolonged use, the first batteries could not withstand such a load. And one more thing that I did not like - by the end of the warranty period, if you do not use a cover, then the paint from the rim may peel off. In the Chinese, this is almost a rarity, but here the device costs a kilodollar at the start of sales. It was possible to solve this problem. Okay, enough ranting and let's get started. Everything is in order.

ATTENTION!!! Before you start updating software, rooting, resetting settings and other manipulations with your own or, God forbid, someone else's device HIGHLY RECOMMEND read this one. In short, you have been warned and do not say later that you are hearing this for the first time.

Preparation for firmware and other actions.

To start flashing your smartphone, you must first prepare. The preparatory stage does not take much time, but it allows you to do everything without any problems. Everything needs preparation.

As usual, I first recommend charge the battery , preferably one hundred percent, but half is enough too. But it’s better not to take risks and put the phone on charge and wait for it to finish;

For firmware, we need a regular microUSB cable which is included with the device. Check the phone and cable connectors for serviceability and the absence of dirt and traces of oxide. Otherwise, the device simply will not be detected by the computer and will not be flashed;

Drivers are installed with KIES -om or you can install it separately - there is an installation instruction and the file itself;

Flasher - Odin3 v3.07 ;

Firmware - I9500XXUGNG3 . In the examples, I used this version, although an updated version has now been released. But the main thing is not to show you the process of changing software. Latest firmware version I9500XXUHOD4 is in the files - it is relevant at the moment;

cf-auto-root-ja3g-ja3gxx-gti9500 - a file for obtaining root-rights;

philz_touch_6.00.8-i9500 file for installing custom recovery;

Personal computer or laptop - a simple computer with winXPwin7win8 on board will do;

You have probably already thought about where to get all this software - at the end of the post you will find the answer to this question.

Samsung Galaxy S4 GT-I9500 - drivers.

There are several ways to install drivers for Samsung devices. I use only two - the first is to install a synchronization program with a computer called KIES. You can download it on the official SAMSUNG website for free and there it is always the latest version. Look for it on the model page in the technical section. support. I told you how to install it. If you already have it installed, then you can skip this part of the post and go straight to the firmware. If not, then it is better to install the drivers separately. Now I will show you how to do it.

1 step:Download and run the file named SAMSUNG_USB_Driver_for_Mobile_Phones.

2 step:The installer will launch. Click the NEXT button.

3 step:Select your country and language, and then click the NEXT button.

4 step:Choose a disk location for installation or leave everything as it is and click the INSTALL button.

5 step:The process of copying files and installing drivers.

6 step:Installation is completed, press the FINISH button to exit the installer. Now you need to connect the included smartphone to the computer with a cable and wait for the system to automatically detect it.

Update with standard software.

This part will show how to flash this device with standard or factory software. This method is absolutely legal and safe both for the guarantee and for the hardware of your smartphone. Also, it is very simple and you will cope with this task the first time ... I'm sure of it. But before doing anything SAVE ALL IMPORTANT AND NECESSARY INFORMATION FROM THE PHONE TO A MEMORY CARD OR OTHER STORAGE MEDIA, OTHERWISE YOU WILL LOSE EVERYTHING AS ALL OF IT WILL BE DELETED. Let's get started.

1 step:Before flashing, you must enter the phone into DOWNLOADING mode. This is done like this - we hold down the volume button down (reduce the sound) and without releasing it, press the HOME button (at the bottom of the front part it is the only one there) and immediately the power button, hold them until the WARNING !! warning appears. Here we are warned about the risks of flashing. If this does not scare you, press the volume up (volume up) button to continue. If you still change your mind, continue to hold down the volume button (volume down) and the phone will reboot. But I hope that you are not shy, so let's continue.

2 step:If a green androyd appears, then you did everything right. This is the download mode.

3 step:Now you need to start the flash driver. Go to the folder with one and run the Odin3 v3.07.exe application.

4 step:This is what it looks like when running.

PIT -JA3G_EUR_OPEN.pit

Bootloader- BL_I9500XXUGNG3_2200416_REV00_user_low_ship.tar.md5

PDA- AP_I9500XXUGNG3_2200416_REV00_user_low_ship.tar.md5

PHONE- CP_I9500XXUGNF6_2068929_REV00_user_low_ship.tar.md5

CSC- CSC_SER_I9500SERGNG3_2200416_REV00_user_low_ship.tar.md5

BE CAREFUL - RECHECK SOME TIMES!!!

6 step:Now you need to connect your phone to your computer. BUT if you have KIES installed, then you need to close it and “kill” all processes in the task manager with a name that contains the word KIES. This must be done. Now connect the device. If the com-port is determined, press the START button in odin.

7 step:The process of copying firmware files has started.

8 step:Wait for the phone to reboot.

9 step:All Samsung Galaxy S4 GT-I9500 is flashed. You can use.

Root rights in 3 minutes

Let's now show how you can get superuser rights or root access. BUT THERE IS ONE MINUS - YOU AUTOMATICALLY LOSE THE OFFICIAL WARRANTY FOR THE SMARTPHONE. AND THEREFORE I DO NOT RECOMMEND YOU DO THIS.

1 step:We enter the device into download mode. How to do this was shown above. We start ODIN.

2 step:Press the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500. We connect the device to the computer. We are waiting for it to be determined and press the Start button.

3 step:The files will load quickly. The phone will reboot and PASS! will appear. - root received.

4 step:Go to the main menu of the phone and the SuperSU application icon should appear there.

5 step:I WILL REPEAT AGAIN. After rooting, go into Downloading mode and you will see that the custom firmware counter has worked. This means that when contacting the ASC under the manufacturer’s warranty with some kind of malfunction, you will carry out repairs at your own expense. Since you pissed off the guarantee in 3 minutes. It is written in Gar. coupon. Resetting this counter in a more or less simple way has not yet been learned.

ClockWorkMod recovery (CWM)

CWM is a custom recovery that has much more functionality than the standard one. Here will be shown the installation of the recovery philz touch for our smartphone. When you install this recovery, you also lose the WARRANTY.

1 step:Boot your smartphone into download mode. Run one. Select the philz_touch_6.00.8-i9500 file by pressing the PDA button, connect the body to the computer, after determining the com-port, press the Start button and wait for PASS!. CWM installed.

2 step:This is how CWM philz touch 6.00.8 looks like for SGS4.

Video: pattern reset.

If you forgot the pattern combination or just want to do a HARD RESET on your smartphone, watch this video. It shows everything in detail.

Samsung Galaxy S4 GT-I9500 "SECRETS" of development.

So YOU learned how to flash Samsung Galaxy S4 GT-I9500.

P.S. If you encounter any errors during the firmware process or the device does not want to be detected by the computer at all, read this. It describes typical problems and errors that novice users often encounter.

Note that this manual is mostly intended for more experienced users. Therefore, beginners can also take risks, but you will still be responsible for the consequences yourself.

The new update file for your device is version I9500XXUFNB3 Android 4.4.2 KitKat and the build date for this firmware is February 13, 2014.

If you still want to take the risk and manually update your smartphone, and not wait for notification about the availability of an update via OTA, then you can use the guide below. To get started, read some information to prepare for flashing:

Please use the instructions for Galaxy S4 GT-I9500 only;
Do not try to update any other smartphone with this firmware;
Galaxy S4 GT-I9505 LTE will also receive an official update soon, so stay tuned for our news;
Make sure you have downloaded and installed the official Samsung USB drivers on your computer;
Disable the Samsung Kies program on your computer, as it will block manual flashing;
You will need the Odin program if you were unable to update your Galaxy S4 with Kies;
Disable any antivirus software while flashing the smartphone;
Enable USB debugging in Galaxy S4 settings. To do this, you must open the developer settings options: open Settings / ... / About device, find the build number and tap on this line 7 times. Then enable USB debugging.
If your smartphone is flashed with custom firmware, then you will have to completely wipe the system partition;
If your Galaxy S4 is 100% stock, then you can not be afraid of losing information;
Remove MicroSD card from Galaxy S4 before installing new firmware;
Just in case, backup data from installed applications, SMS and other data using Helium for Android or any other similar software;
Synchronize contacts and data with your default Google account;
Check the phone's battery charge and make sure the battery is at least 50% charged so that the phone does not turn off in the middle of the installation process;
This guide is intended for advanced users, however, in any case, we are not responsible for all consequences, whether it be the loss of personal data or getting bricked from a smartphone.

I think this is enough to get you ready to install the official reset of Android 4.4.2 on the Galaxy S4 GT-I9500.

Instructions: how to flash Galaxy S4 GT-I9500 with official Android 4.4.2 KitKat firmware:

Download the I9500XXUFNB3 firmware file from this link: SamMobile. As a reminder, you must have a registered SamMobile account or you won't be able to download anything. Registration will take about two minutes.
After you download the firmware file, extract everything from the archive to a separate folder and save it to your desktop on your computer.
Download Odin3 v3.09 from this link. Extract all contents and save also in a separate folder on your computer.
Turn off your Galaxy S4.
Boot Galaxy S4 in Download Mode.
Launch Odin on your computer.
Connect your Galaxy S4 to your computer with a USB cable. Wait until Odin recognizes the connected device. If this does not happen, then reinstall the drivers.
Next, click on the AP button in Odin and mark the .tar.md5 file you got in step 2. This is the firmware file you need.
Make sure all settings in Odin are set to default.
Note that the Re-Partition option is unchecked.
Press the START button and wait for the update to finish installing.
After that, your smartphone should reboot and you will see that Android 4.4.2 KitKat has successfully loaded on your Galaxy S4 GT-I9500.
Disconnect your smartphone from your computer.

If your Galaxy S4 successfully rebooted and the interface works fine and there were no problems during the installation process, then you can close this article. If there are problems, and the update installation process has not been completed, then below we offer some tips.

Tip 1: if Odin freezes or a FAIL warning appears, then you should repeat all the steps of the instruction from the very beginning until you install the update.

turn off your smartphone and remove the battery.
close the Odin program and make sure the phone is disconnected from the computer.
boot your smartphone in Download Mode, launch Odin and repeat the steps of the instructions again.

Tip 2: if Odin says that the flashing process has completed successfully, but the phone cannot boot to the start screen, then you will have to do a "Factory Reset". This will destroy all data on the system partition, but you can then boot the Galaxy S4 normally.

turn off your phone, remove the battery, and make sure it's not connected to your computer.
boot Galaxy S4 in recovery mode.
select "wipe data/factory reset".
return to the main menu of the recovery mode and reboot the device - Reboot now.
wait for the phone to fully boot up and enter your Gmail account details.