Kites. Instructions for flying kites. User's manual. how to fly a kite how to fly a single coil kite

22.04.2020

Doing something yourself and checking how it works is certainly interesting. That's why people launch boats, paper planes, or other crafts. This is a great pastime with a child on the street. How to fly a kite so that it flies high, and how to control it correctly?

From the outside, everything looks simple - people launch complex figures into the air and can set their own height and speed of movement. How to achieve this? And why do snakes fly without large wings or other adaptations than a tail?

Why does a kite fly

From the outside, the flight of a kite seems amazing. Especially when it rises smoothly by itself and holds on for a long time, carried away by unknown forces. A person regulates the speed and height of the kite by moving and pulling the line.

If you delve deeper, you can understand that 4 natural forces will act on it immediately upon launch:

lifting and driving force (wind);
resistance;
gravity.

The interaction of forces ensures flight. Resistance occurs under certain conditions. This happens when the air opposes any moving body. It is not difficult to check the activity of the force - open your palm and move it from side to side. You will feel a slight resistance.

Now take the cardboard and start fanning it like a fan. The difference is noticeable immediately - the air seems to slow down the movement. The operator uses this power.

He starts flying a kite like this: he puts the kite on the ground, takes the line and pulls it, moving quickly against the wind. The kite will take off. It is important to choose the angle here, as this will affect the overall takeoff speed. If there is a breeze outside, then a vacuum zone forms on top of the kite, which gives confidence to the movement. The aircraft uses the vacuum zone and begins to soar like an open sail.

It turns out that the main conditions for a quick takeoff and subsequent flight of the kite is the angle of attack, which is also the angle of the necessary lifting force. If the kite stands upright, then the natural air resistance will increase, and at the same time the lifting force will increase. In a horizontal position, it quickly decreases.

Wind characteristic for flights

No wonder it is so named - its flight primarily depends on the presence and strength of the wind. In calm, even a well-designed model will remain motionless. The only thing that can simulate the wind is physical effort, but then the operator will have to run constantly.

Strength

First of all, before launching, you should check the weather: are tree branches, leaves and grass moving, raised flags are moving, are small ripples visible on the water? Great, the weather is right. It is important to find the "golden mean" of the activity of air currents. Strong gusts can break or blow the kite away.

Direction

Here the kite has taken off and soars. The best position is with your back to the wind, facing the kite. Determining the direction of air flow is easy. Where does the grass bend, the tips of the flags point, the packets fly? You can expose your face to gusts of wind, feel how it touches your cheeks.

Those friends who managed to launch the kites will serve as hints.

How to choose a place to launch

In order to fly a kite correctly, you must first choose a suitable location. Sometimes the launch is difficult - the kite barely got up, spins constantly, pulls on the fishing line. He will gain stability later, when he gains a certain height. Or it took off easily, and then “swarmed”, becoming uncontrollable.

It is more convenient to launch kites from a small hill - a hill, an embankment, a platform. You need to choose a flat place, not crowded with foreign objects. After launch, attention will be focused on the snake hovering above, so it is important to ensure freedom of movement in advance. It would be a shame to suddenly stumble while running.

Thus, the ideal place to launch:

smooth, without debris and obstacles;
on a hill, a small mound;
there are no houses, horizontal bars, trees, roads, airports nearby.

Flying a kite: step by step instructions

To enjoy free flight, you need to fly a kite correctly. Take into account the weather, wind strength, choose a place, calculate the ideal launch angle.

First of all, using improvised means, determine the current direction of the wind. Remember, he is more active at altitude.

Launching a kite - alone, together

Strengthened wind. It is enough to release the snake, unclenching your hands, having previously settled down with your back to the gusts. Point the nose of the kite up before launching, holding the lifeline nearby, at the base. After releasing, slowly unwind the thread, increasing the height.

Double launch. The assistant holds the kite, directing his nose up. You, having unwound 20 meters of thread from the spool, step back. Command the assistant to open his arms and at the same time toss the kite. Watch as the released kite takes off rapidly, carried away by gusts of wind. Adjust the flight through the tension and length of the thread.

Weak wind. It seems that there is absolutely no wind below, but the tops of the trees are actively swaying. So, he is strong enough, only on top. Then it is important to help the snake to climb it.

Running alone. Having taken a position with your back to the gusts of wind, place the kite down on the ground exactly perpendicular, “facing” to you. Unwinding the rope, slowly move away, trying to keep it in the previously set position.

After stepping back 8-10 steps, sharply pull the unwound rope and run until the kite gradually rises, reaching the area of active wind. Feeling how he caught the air currents, stop. Now you can adjust the hovering of the kite.

Double launch. The snake is held by an assistant. This method is great for a family run, when children help parents. Keep it high, aligning it strictly perpendicular to the gusts of wind. The child at this time departs, unwinding the rope.

When he rewinds 2-3 meters, ask him to run. Unclench your hands in time, giving the snake the opportunity to take off. That's it, now help the kid to regulate the flight of the kite. Be an assistant, prompting the child the nuances of control. So he can quickly learn how to fly a kite.

flight control

Basically it all depends on the actual wind strength:

The wind has died down, the kite is falling - pull the rope faster by lowering your hand or stepping back. See that the thread remains taut at all times.
Increased - on the contrary, unwind the rope, at the same time slightly loosening the tension and approaching the hovering snake. The main task is to capture the moments of wind change and adjust the thread tension in time. In order for the kite to rapidly pull ahead - loosen it, if it decreases - tighten it.
The flight is unstable - at first it soars, then suddenly starts to fall. Watching the chaotic movements you need to catch the dynamics. Remember, the direction of flight always depends on the position of the kite's nose.

body position

From the launch videos, it is noticeable that a person always has a snake in front of him. It is more convenient to track the flight, control the tension force and the length of the rope. Periodically, you need to move - run or move your hands. It all depends on the strength and direction of the wind.

The starting position is with your back to him, providing yourself with the freedom of possible movements.

First maneuvers

It is more difficult to launch when the wind is weak or, conversely, strong. If the gusts cannot be determined, they are constantly changing and the kite is prowling, trying to snatch the fishing line, then it is better to wait. It is extremely difficult and even dangerous to regulate the flight in such conditions.

There is no wind, the launch will be complicated. You will have to replace the elements with physical effort, constantly run so that the kite remains at the previously set height. It's easier when the wind is at the top. Then it is enough to raise the kite, later the element itself will pick it up.

Always look where the nose is pointed, this determines the flight path. Down - the kite will fall, up - it will rise.

If the kite falls

The situation will be saved by the following maneuvers - loosen the initial tension of the rope, allowing the wind to straighten the flight on its own. You can carefully adjust the direction of the nose. Wait for it to rise up and return the rope to its original tension. Adjust its length according to the wind pressure.

Is the fall inevitable? Loosen the rope, let the kite slowly lower itself.

Landing

Walked up, it's time to plant the snake. The right approach is needed here, especially when a strong wind holds. Many people think that it is enough to wind the thread and it will fly by itself. This approach is dangerous for crafts. Strong air currents can break the thread or harm the snake.

It is better to make sure the kite has a safe landing. Plant it across the wind. First take a position with the kite 90 degrees into the wind. Now slowly approach the hovering aircraft while shortening the thread. See that it remains taut and pliable enough.

Is it blowing hard? It is worth moving, looking for a zone where it is weakened and landing there. Move, reducing the length of the stretched thread as much as possible. A strong wind usually blows in gusts in one direction. There are quiet places. It is important to find such a safe zone and land the kite.

Safety

Although kite flying is considered a harmless activity, there are a number of precautions to be aware of.

Safety regulations:

do not choose places for launching where there are power lines or stretched wires nearby;
look for a flat place without trees, horizontal bars and houses;
launch in windy (light or medium wind) but clear weather, not in a thunderstorm;
do not trust the launch to small children, especially in strong winds;
if the fishing line is rough, it is worth protecting your hands with gloves;
avoid roads, airports, especially when running with a child!

What could be better than a wide open field, a warm light breeze and a kite dancing in the air?

We present you a training manual, which is useful for all novice pilots. There will be some science, physics, history and culture. For adults, this is a chance to plunge into youth again.

Flying a kite is fun, but only if you know how.

Environment

Kites love open space. The more open the place you have chosen to fly, the better the kite.

The wind, which has to bend around trees, buildings or hills, becomes uneven and rough. This is "turbulence".

You won't be able to see it, but it will be difficult for the kite to fly and perform tricks in such conditions.

Therefore, the first advice is to choose a place as far as possible from all sorts of obstacles that interfere with the smooth passage of the wind.

Everyone heard of "Tree-Eater-Kites"?

Make sure that there are no trees in the path of the kite, they do not interfere much with piloting, but a kite flying by can get into the air flow around the tree. As a result, he will get stuck between the branches and have to call the fire brigade to save the poor fellow...

And, of course, avoid proximity to dangerous objects, such as highways or power lines.

The best places to fly a kite are a large open field, park or beach. The more open space you find, the more fun and less trouble you will have.

Wind

A kite needs wind to fly. How strong depends on the type of kite you are about to fly.

Some are heavy, respectively, require the presence of a strong wind. Others are specially designed to fly in light winds.

However, most kites are designed for use in the medium ranges of 1.5 - 5 m/s.

In most cases, you can determine the strength of the wind yourself, guided by your own feelings or observations of the behavior of the leaves on the trees. If the leaves barely move, then most likely it is too weak a wind, and if the whole tree sways and you can hear the linen flag fluttering, then it is even too strong.

Also, you can use special devices for measuring wind strength.

Experienced pilots eventually get used to judging the wind by eye on the effect on surrounding objects.

Kite

There are many varieties of kites. Each type was originally designed for specific purposes.

These can be simple diamond-shaped (diamond), triangular (delta), box-shaped (box), inflatable (parafoil) or controlled sports with two or four lifelines.

Before launching, make sure your kite is suitable for the current wind strength, if the kite needs a tail, if the lifeline is firmly attached.

If everything is in order, you are ready to launch.

launch

Running with a kite is fun but not too smart, you can't watch where you're running and enjoy the sight of the kite at the same time.

Such a flippant approach can lead to trouble for both you and the kite.

Instead, try a smarter approach.

Stand with your back to the wind and lift the kite as high as you can. Make sure the kite is "looking" straight up and release it easily. Do not overdo it, do not try to "throw" the kite into the sky, just let go and let it fly on its own.

If the wind is strong enough, the kite will rise into the sky and start flying. Slowly pull the rail and the kite will fly back towards you.

Then, just before it hits the ground, let go of the rail and the kite will rise up again. All you have to do is repeat this process until the kite is caught in a steady stream of wind.

In light winds, you may need the help of a friend. Ask him to hold the kite at a distance of 15-20 meters from you and release it as soon as you pull the rail. The kite should rise into the sky in the same way as if you released it yourself in a stronger wind. Soon, the kite will rise into the zone of stronger wind and the difference will disappear altogether. This will make you look much "smarter" than people running around trying to help the snake fly.

flight control

Watch the kite continuously as it flies. If something goes wrong, you will have time to do something to avoid aggravating the situation until the structure breaks. Resist the temptation to let go of the rail too much: 30-60 meters is enough. At long distances it is quite difficult to observe the flight for you and the surrounding observers.

If the line is loose, tighten it, if the line is too tight and the kite is unstable in the air, let it go a little. The main goal is to pilot the kite, not just let it fly.

To complete the process, start slowly winding the line onto the spool. If the wind suddenly weakens, you can do it faster. As a result, throw the lifeline along with the kite to the ground so that the lifeline lies freely in the open space, this will soon allow it to be lifted into the air again without additional difficulties.

In strong winds, it may be necessary to attach the lifeline to an anchor on the ground, as well as use gloves to avoid damaging your palms.

Remember that tension on the lifeline increases the force of the wind on the kite. If the kite is behaving unstable, do not pull the lifeline even more, trying to bring it closer to the ground. Instead, loosen the tension and let the kite rise freely higher into the sky before pulling back gently.

If the kite began to rotate in a large loop closer and closer to the ground, once again, when it is close to the ground, pull it towards you, this additional effort will land the snake on the ground. At this point, you will surely be glad that you did not let him go too far.

Leer

You can buy a leer in the same place as the kite itself. Quite often, kites are supplied with the lifeline, although this is not always the case.

Special lifelines are usually lighter, stronger and thinner. All these qualities have a positive impact on the piloting process. Ideally, it's best to use the thinnest lifeline that the particular type of kite can support.

Adjustment for different wind strength

Many kites can be "fitted" to a specific wind force. Adjustment is carried out by changing the point of attachment of the rail to the kite. By moving the attachment point, you change the angle of the kite to the wind.

The larger the angle, the better the kite will be able to fly in strong winds, the smaller the angle will allow the kite to fly even in a light breeze. Too large an angle can cause the kite to flip in the wind and break, too small will not allow the kite to fly.

Experiment! You will be surprised how such a small change can make a big difference in flight quality.

Tail

The design of many kites suggests the presence of a tail. The long tail, fluttering after the kite, serves as an undoubted decoration of the overall picture. But tails also have a practical value: the added weight towards the bottom tilts the kite up with its leading edge and provides better flight stability.

Thus, if your kite is unstable, try adding a tail, and vice versa, if the kite turns over and falls to the ground, you need to reduce the length of the tail or remove it altogether.

Tails are good for balance. One tail should be attached in the center of the kite next to the lifeline, two tails should be symmetrical on the sides, also make sure they are the same length/weight.

Problems

Even an experienced kiter sometimes encounters a tangled lifeline or finds his kite hanging from a tall tree.

Do not panic! Keep calm and everything will be fine

A snake in a tree? Don't try to climb, if you fall it will hurt . Yes, and do not pull the rail, it is unlikely to help, rather harm.

It is best to let go of the rail and wait until the wind blows the kite through the tree. After that, unhook the kite from the lifeline and pull out the lifeline. back.

If your kite's line gets tangled up with another kite's line, just walk up to the owner and say hello. Surprisingly, both tangled lifelines will descend to the ground right to the place where you both will be standing.

And what if the rails are intertwined on the ground? In principle, you can avoid this ambush by carefully managing them, but if it does happen, all you can do is carefully unravel the ball. Life is not perfect

The kite doesn't fly?

Not all flights go smoothly. If your kite won't fly, you may be experiencing one of the following problems:

"Wrong" wind. Maybe too weak or too strong. The required wind strength depends on the kite, if there is a tail - try to unhook or attach a longer one.
Turbulence. Trying to fly a kite near a building or large tree? Not sure it's going to happen.
"Reconfigured". Maybe you or someone else has already adjusted this kite to a different wind and left it that way? Try to return as it was.
"Circle". If the kite is circling, try adding a tail or moving the anchor point of the lifeline.
"Lazy". If the kite does not want to rise into the air, unfasten the tail, move the attachment point of the lifeline. Maybe the rail got wet?
Technical difficulties. Make sure the kite is assembled correctly, read the instructions again. Safety

Every pilot should be concerned about safety. A kite that has lost control can cause physical harm to a random person.

An unwound lifeline lying unattended on the field can be a danger to passers-by people or animals.

Please be careful when flying the kite around other people.

In particular, never launch a kite across the road, if the kite lands on the ground and the rail crosses the road, this may cause a road accident. Never fly near an airport or power lines.

Be polite and courteous to your neighbors, good pilots always treat other pilots with respect, and even strangers.

Remember that the sky is a shared resource, try to be sensitive to competitors for the attention of the audience.

So you will get much more joy and pleasure!

Translation - IM "GlavZmey"

August is known to be the month of winds. Right now is the best time for the traditional summer fun - kite flying. The serpent soaring high in the sky represents freedom and carelessness at its best. How nice it is to feel like a person controlling such a wonderful toy, to feel the changes in air currents, to turn your face to the warm wind ... At first glance, it seems that launching a kite is an elementary matter. But in fact, in order for the flight to “go well”, you need to learn a little more about how to fly a kite, bought in a store or made by yourself.

kite in flight

Where is the best place to fly a kite?

The success of the entire enterprise largely depends on how competently the place for launching the kite is chosen. Ideal if you are in an open space. It can be a deserted seashore or a flat field. The main thing is that there should be no interference around in the form of buildings, trees, buildings, wires, etc. All these obstacles make launching much more difficult or even impossible. They affect the speed of the kite, increase the variability of its directions, and generally interfere with the enjoyment of the process in every possible way.

Strength and direction of the wind

Of course, a necessary condition for flying a kite is the wind - nothing will work without it. What matters is its speed. If it is equal to 3 m / s, then only the lightest models of kites will rise up. The optimal speed for beginners is 3-8 m/s. If the wind is strong enough (speed more than 8-11 m / s), then these are conditions only for experienced professionals.

The optimal wind speed for launching a kite is easy to determine by eye. Take a closer look at the nearest trees. If only their leaves move from a light breath, the speed is too low. If small branches also come into motion, consider that the weather conditions for a beautiful summer fun are optimal.

The direction of the wind is also important. The kite flies against the wind, so for more successful launching and control, it is best to stand with your back to the wind.

Let's fly a kite into the sky

There are several techniques for flying a kite, consider the main ones.

The normal launch, which requires the help of a buddy, is probably the most common kite launching technique. One person takes the kite in his hands, the other unwinds about 20 meters of the lifeline in the direction of the wind. After that, the launcher needs to stand against the wind, pulling the rail, and give a command to a friend to let the kite go. Then act according to the situation. If the wind is not strong enough near the ground, you will have to walk a few steps back or even run a short distance before you feel that the kite has caught the wind and rushed up. If the wind speed is high, then it will soar on its own.

Hand-launching is another fairly common technique that only applies to well-designed kites. If yours is one of those, then you will not have to resort to the help of a friend to launch it. So how do you get an object up in the air? To do this, you need to take the handrail directly next to the kite and direct it with its nose into the sky. Then you should slightly pull towards you, tearing the structure off the ground. A moment - and the kite is already merrily and carefree soaring in the sky. It remains only to unwind the rail, adjusting its flight.

Finally, there is also "Pull-release" launching technique. It is ideal when there is uneven or light wind and very limited space. The technique saves space and effort, eliminating the need to quickly run back in an effort to quickly raise the kites higher. What if there, in the sky, the wind is stronger and more even? The start of the launch repeats any of the techniques described above (with or without the participation of a friend). Then you should start a slow retreat back, without unwinding the rail. When the kite reaches the maximum height for the initially given length of the rail, the launcher releases the rail, in connection with which the structure descends from heaven almost to the very ground. In this case, you still need to unwind the railing (either with your hands or by stepping back). Without letting the kite land completely, it is necessary to fix the rail again and continue moving back. As a result of such a maneuver, the kite will soar even higher. It may be necessary to perform the maneuver several times until the kite reaches a height where the wind is strong enough to lift the lightweight structure up without human assistance.

Precautions while flying a kite

In fact, launching a kite is quite safe fun. It would seem, what could threaten such entertainment? However, under certain circumstances there is something to be afraid of.

The very first rule is never fly a kite near wires and power lines. This is very life-threatening. Electricity that can pass into the ground through the launcher's body is the cause of serious health problems and even death.

Never fly a kite during a thunderstorm. It can attract lightning to itself and become a kind of lightning rod. Hardly anyone can survive this.

Do not fly a kite near animals or other people. Desert spaces are ideal sites. First, the snake can scare casual bystanders. In addition, a dog merrily chasing a kite is, of course, a very funny sight. But do not forget that someday he will sink close to the ground, and the animal will definitely grab him in the teeth.

In many countries around the world there is an outright ban on flying kites near airports. So, in North America, the forbidden zone has a radius of 6 to 10 km.

Finally, in clear weather, do not forget about sunglasses. Exposure to direct sunlight can cause serious damage to your eyes - protect them even if you stand with your back to the sun. And, of course, use sunscreen - take care of your own skin.

Compliance with all these simple recommendations and following the safety rules will provide you and your children with a pleasant pastime. Flying a kite is fun at any age. This is an incomparable feeling that everyone should experience.

Photo from personal archive. Copying prohibited

The Chinese have long believed that a kite soaring in the sky takes away all illnesses, hardships and worries. In addition, kite launching is always a spectacular and fairly simple activity. The main thing is to choose the right place and take into account some of the nuances.

What kid doesn't dream of flying a colorful kite? What could be stronger than the delight with which children watch a toy soaring in the sky? "Daddy, let's make a snake!" - says the beloved child. And the father scratches the top of his head in concern, because assembling a kite and flying it seems to be something especially difficult. But it's not like that at all.

Theoretical minimum

Before you fly a kite, you need to familiarize yourself with the basic concepts:

A rail is a thread with which a flying toy is controlled;

The bridle is a strong thread woven together, thanks to which the kite is attached to the lifeline;

Bearing area - the size of the projection of the kite on a horizontal surface;

Bearing capacity is the lifting force of one unit of bearing area;

The center of pressure is the center of the bearing area.

How to make a toy fly?

How to make a kite so that it soars? To do this, its surface should not be flat, but should bend upwards under the pressure of the air flow. That is why, when making a kite, it is not recommended to stretch the material (paper, oilcloth, fabric) too tightly. Sometimes it is enough to fix only the corners. The center of gravity must be shifted towards the tail, otherwise a long hover cannot be achieved.

The leading edge of the kite must be carefully taped or reinforced to avoid eddies. For those who do not yet know how to fly a kite, it is better to give preference to flying models that have a long tail - it gives the correct balance to the whole structure.

Another important element is the bridle, which should consist of two threads. But such a kite is quite difficult to manage, so it is better for beginners to use a triple bridle.

Home workshop - manufacturing steps

1. To assemble the simplest type of kite, you need to take two thin pine, bamboo or plastic slats 30 and 50 cm long. Measure 15 cm from the end of the longer slat and fasten a small slat at a right angle with strong threads. Thus, a crosspiece for a flying toy is obtained.

2. At the ends of the planks, you need to make round notches into which a thin, strong thread is pulled. You should get a quadrangular frame.

3. Then you need to take thin paper or oilcloth and fit the existing workpiece. To do this, the resulting frame is placed on a sheet of prepared material and circled with a pencil or marker, adding a small distance to the allowances for fastening.

4. The pattern is cut out, after which the frame is well smeared with glue and attached to the material. You can decorate a kite with felt-tip pens, drawing cartoon characters on it (which will please your children), or depict the slender legs of your beloved woman on it (which will please you).

5. Now you can start attaching the bridle. For this, a spool of fishing line is taken, which is attached to the left corner of the workpiece. Then it must be stretched to the nose of the snake, and from there to the right corner to determine the length of the bridle. Cut the thread and attach the tip to the right corner of the snake (it turns out a long thread from one end to the other). Now we take the spool again, fix the fishing line in the bow of the structure, measure the distance to the left corner of the kite, add another ten centimeters, cut it off and tie it to the middle of the first thread.

6. The tail of the snake can be made from a thin cord or a strong nylon thread, measuring 3.5-4 meters. The tail can be decorated with paper bows.

7. Launching a kite is impossible without a leer. To do this, a long strong thread is attached to the bridle, at the end of which you can tie a small stick for ease of control.

Flat flying structures

Such kites are the simplest and most famous. The frame is made of pine or any other light wood. Sheathing is made of film or paper. Paper does not provide structural stability, so it must be durable (mica, cigarette or rice paper). If a film is used, then it should stretch poorly, but at the same time stick well to the frame (it is best to buy acrylic).

What does a monk serpent look like?

Such a flying layout got its name due to its similarity with the hood of a monastic cassock. Such a kite is perfectly centered, so a two-lead bridle is enough to launch it. The tail is used as a balancer, it should be light and thin. The material for such a kite is better to choose dense, because under the gusts of wind it is too easily crushed and falls.

Archery flying structure

This is one of the varieties of flat kite. The frame is built from a pair of rails, which ensures lightness. In this case, the front rail gives rigidity to the entire structure, but there is a greater sensitivity to the wind. Beginners are not always able to master the first time flying this type of kite.

box design

This type of homemade snake looks pretty solid, but it is quite simple to perform. He doesn't need a tail. What's more, these snakes can lift small loads, so you can put a small digital camera in them, after turning it on for video recording or continuous shooting. In this way, you can get completely unique shots from a bird's eye view. But the box-shaped design keeps well in the air only in strong winds.

How to fly a kite: choose a place

So that nothing interferes with the flight process, you should choose open areas without any obstacles. Trees, kiosks, buildings located nearby interfere with the direct passage of air currents and create unnecessary turbulence. The sea coast with its breeze is perfect (unless, of course, you have to jump over the bodies of vacationers at the same time). It is better to stay away from highways, airfields and power lines.

How to fly a kite (instruction)

First you need to determine the direction of the wind by simply drooling on your finger. Now the kite is solemnly handed over to a friend (girlfriend, child, wife). You need to stand in front of your assistant, who should hold the kite above his head, perpendicular to the ground. The wind should blow at your back, the reel with the lifeline should be in your hands.

So how do you fly a kite? First you need to slowly move away from a friend at a distance of about 20 meters, while unwinding the leash. Having given the command: “Let go!”, sharply pull the rail towards you. With a good wind force, the kite will soar in the air itself, and all that remains is to enthusiastically watch its flight. Otherwise, you will have to run around the field a little more until the structure catches the air flow.

How to fly a kite in different wind strengths? If it flies only when the person driving it is running, then the wind is too weak. With fairly strong air currents, the flying structure soars in the air with ease, and no additional effort is required. The optimal wind speed for launching a paper layout should be 3-6 m/s.

If the tension of the thread-leash is too strong, then it should be unwound a little. If the wind subsides, then the snake is pulled to itself. To return the structure to the ground, it is necessary to gradually wind up the rail and go home with a sense of accomplishment.

It is difficult enough to fly a kite when the wind is weak, but still possible. The wind is always there! If it is not near the ground, then it is already at a height of 35-40 meters, but you still have to get there. How are we going to do it.

Flying a kite in light wind

Need a friend, comrade, who will help in the launch. The standard length of the thread that is attached to the kite is 30 meters. Of course, this is not enough, but we will try. It is necessary to unwind the rail as far as possible. Your assistant should be with the kite at the other end of the lifeline. As soon as you are both ready, the assistant slightly tosses the kite, and at this moment, you begin to quickly reel the lifeline. Under tension and wind resistance, the kite begins to gain altitude. This is where a very important point comes in. You need to watch the behavior of the snake very carefully. Already at a height of 10-15 meters, a kite can catch the breeze. And at this time you must stop winding the lifeline, you will feel the tension of the kite. Give him some freedom. If the kite starts to pull the handrail out of your hands, then do not be shy, let it gain height. It is important to capture the moment of tension. If the rail is loose, tighten a little. With such not cunning movements, you will make the kite fly.

If, nevertheless, you do not have an assistant, but you want to start it, then there is a proven method. You will have to unwind the rail yourself, but the snake must be attached to something durable. A small tree, shrub, high hummock can serve as a support. Well, as soon as you unwind the thread, pull sharply towards yourself and repeat the steps described in the first method.

Good wind, great kite flying helper

In the weather, when there is wind, there are no problems with flying a kite. You can launch a kite with one hand. Stretch out your hand with a kite, and as soon as the wind begins to pull the kite, you begin to gradually poison the rail. With such a wind, it is important not to burn your hands with a handrail. I highly recommend using gloves.

Running kite flying method

We hold a winder in one hand, a kite in the other. But we do not hold the kite itself, but the handrail and from the kite we make an allowance of 10-15 centimeters. We start, we run slowly. Behind you, the kite, gaining air, begins to rise. At this moment, you slowly begin to let go of the rail. Let go of the kite with a slight stretch, so it will better gain height. As soon as you feel good traction, you can stop running. Voila, and sports and entertainment! REMEMBER, the handrail can burn your hands. Use gloves.

You can fly a kite with a scooter, a bicycle, a light moped and you won’t believe it, even a boat.

Friends! Flying a kite is a very fun activity for all ages.