Homemade tractor from Zhiguli. Homemade mini tractor for the household How to make a tractor from a VAZ 2101

17.06.2022

Homemade minitractor with a Zhiguli engine is another of the most popular types of do-it-yourself mechanical assistants. The reasons for creating such a homemade product are obvious. This is the cheapness and availability of the source material, the reliability and ergonomics of a self-assembled structure, the ability to mechanize most of the work on your personal plot.

With the help of a minitractor from the Zhiguli, you will be able to carry out operations for the processing of soil, transportation of goods. You will also have the opportunity to work with a wide range of attachments - from a sprayer to a minitractor to a tedder rake.

You can make a mini tractor with a VAZ engine from virtually all well-known brands. Most often, the VAZ-2101, VAZ-2102, VAZ-2104, VAZ-2106, VAZ-2107, VAZ-2108, VAZ-2109 models lend themselves to fracture. Let us dwell on the VAZ-2106 model, which is distinguished by efficiency and endurance.

Creating a mini tractor with your own hands with an engine from a VAZ should begin with the preparation of drawings. As an example, you can use the figure below:

When creating drawings, immediately determine the location of the checkpoint, fuel tank. Provide a protective cover for the motor. It is desirable to make the front suspension reinforced and shorten the frame. This will reduce the fuel consumption of the unit.

It is better to take components from one technique. This will facilitate possible repairs and operation in general. But if the quality of some components or parts is in doubt, you can use spare parts from other equipment. For example, the gearbox can be taken from the GAZ-53, and the rear wheels from the MTZ tractor. Bridges, a steering wheel and a place for the operator's work can no doubt be borrowed from the selected VAZ model.

If you foresee that the future unit will have a 4x4 wheel formula, then the engine must also have the appropriate power. Basically, these are 4-cylinder liquid-cooled units with a capacity of at least 40 hp. With.

The engine will be located in the front of the frame, it is advisable to weld a protective cover to it. Difficulties can arise only with the attachment of the transmission to the engine. To do this, you will have to connect the converted clutch basket to the engine, then completely re-equip the flywheel, adjust all dimensions.

Subsequent work on the creation of a mini tractor from a VAZ should be carried out according to the following algorithm:

Frame welding. Channels and corners are suitable as blanks. Before welding, they should be thoroughly cleaned of rust and primed.
Improvement and installation of running gear. Bridges and the brake system are adjusted to the future unit, their integrity and serviceability are carefully checked.
Mount the wheels of the required diameter.
The engine and transmission, a protective cover are attached to the front of the frame.
Ergonomically and conveniently we install and fix the control levers, the operator's workplace, the platform for attachments.
If necessary, a weighting agent is attached to the front to improve the balance of the unit when working with attachments.

When constructing a Zhiguli unit on our own, we are faced with the need to shorten the VAZ bridge for a minitractor. This is a rather responsible and difficult stage of work. To properly shorten, first read the diagram, which shows all the dimensions of the future structure:

Subsequent work should be performed according to the following algorithm:

The spring cup is cut off and the end flange is removed.
Part of the removed axle shaft is cut off, a groove is made on the edge.
A hole is drilled inside the cup.
We dock and center the axle shafts, weld them according to the drawings.
We insert the finished part into the bridge.
We weld the bridge on both sides.
Welding seams must be of high quality. At the end of welding, the seams are heated and cooled several times.
We attach the bridge to the frame using a V-like design.

For clarity, we also suggest that you familiarize yourself with the video, which shows in detail the process of shortening the VAZ bridge:

To shorten the front axle, you can use the diagram below:

The mini tractor is an indispensable agricultural equipment for cultivating the land, planting seeds and harvesting. Especially this technique is in demand in the village, among the owners of large household plots. The cost of mini tractors in the factory version is quite high. Even the latest Chinese-made technology is sometimes not affordable for everyone. Therefore, more and more home craftsmen are trying to make a mini tractor on their own, using improvised materials.

If you decide to assemble a mini tractor with your own hands, then first of all you need to pick up a power unit for it. The latter is often used ZID engine. This is a four-stroke unit with a volume of 0.52 liters. and a capacity of 4.5 l / s, which is quite suitable for processing 2-3 hectares of land. The engine is easy to maintain, so it is often installed on various home-made equipment, moreover, it is easy to buy it on the Internet.

Another option for homemade is . This is a two-cylinder unit with a capacity of about 12 l / s and a volume of 0.42 liters. Although this type of motor has long been discontinued, there are a large number of offers on the Internet for the sale of this unit. It can be bought for approximately 5,000 - 8,000 rubles.

Often, in the manufacture of homemade tractors, craftsmen use motors from cars. For example, you can meet mini tractors with an Oka engine.

This engine has a power of 29.3 l / s and a volume of 0.649 liters. In fact, this is a VAZ engine (VAZ 21083), only in a lightweight version, since it has 2 times less weight. A distinctive feature of the engine from the Oka is its low gas consumption and high efficiency.

The more expensive option is engine from "Zhiguli". The motors of the VAZ car line have an engine power of 59 l / s (VAZ 2101) and above. A tractor with a VAZ engine is a fairly powerful unit that can cope with almost any agricultural work.

It is easiest for owners of walk-behind tractors to make a mini tractor for the household, since this unit already has all the necessary control units. It remains only to make a suitable frame, and the tractor is ready.

What to make a frame

The assembly of a mini tractor always begins with the manufacture of the frame. The frame of the minitractor acts as a base on which all components and parts of this unit are fixed. The frame should be strong enough and at the same time not very heavy. It is usually made from metal corner, profile pipe or channel. Parts are connected by welding. The frame can be one-piece or two-piece.

one piece frame the easiest to make. It is enough to weld a rectangle from a channel or a corner. Frame dimensions are calculated based on the dimensions of the engine, gearbox and other components.

Also, 4x4 mini tractors are very popular among homeowners. These are four wheel drive tractors. with broken frame. The word "all-wheel drive" means that the unit is driven by both axles, front and rear. An example of such a frame made from channel No. 10 is shown in the following photo.

Frame fracture knot most often they are made from the cardan shaft of a car, for example, from GAZ-52.

The main advantage of a homemade tractor with a breaking frame is the small turning radius of the unit. Due to its high maneuverability, the fracture minitractor is successfully used in small areas where it will be difficult to turn a minitractor with a solid frame.

Below are drawings of a frame connected by a hinge.

What to make a chassis

To assemble a mini tractor, you need to prepare its chassis. It includes wheels, front and rear axles, transmission elements.

When choosing wheels for a mini tractor the intended use of the latter should be taken into account. If the unit is being built for the transport and pulling of goods, then a disk diameter of 16 inches will suffice. When using the tractor in the field, it is better to use more massive wheels with discs with a diameter of 18 to 24 inches.

If the drive axle in your tractor is only the rear, then front beam is made simple enough.

To make a homemade front axle, as well as its rear counterpart for all-wheel drive, you will need to take 2 identical chassis units, for example, from a VAZ or Moskvich car, and shorten them. How to shorten the bridge from a VAZ car can be found in this video.

Important! Bridges must have the same gearboxes, with the same gear ratio. Otherwise, the front and rear wheels will rotate at different speeds when the tractor is moving.

Since the bridges already have a built-in mechanism for transmitting rotational motion to the wheel axle, it is not necessary to make a home-made gearbox.

Benefits of installing hydraulics

Hydraulics is installed on a minitractor in order to ensure the operation of some of its mechanisms and facilitate the management of this unit. The unit with installed hydraulics has its advantages.

The car becomes easy to control. The steering wheel can be turned with almost no effort with one hand.
Hydraulics makes it possible to use various attachments.
The use of hydraulics allows you to upgrade the braking system. Thanks to the hydraulic cylinders installed on the unit, the braking of the unit occurs instantly.

You can make hydraulics on a mini tractor if you purchase a ready-made system in a store in advance or use parts from old agricultural machinery.

Important! When installing hydraulics on a mini tractor, it should be borne in mind that some of the engine power will be spent on servicing this unit. Therefore, for tractors with low-power engines, installing hydraulics will not bring any benefit.

What is the VOM for?

The power take-off shaft (PTO) is designed to drive various agricultural mechanisms connected to a mini tractor, for example, various cutters for tillage, potato diggers, mowers, snow blowers, etc.

PTO can be like dependent and independent. In the first case, the shaft is driven by a transmission that transmits rotational motion to the wheels. As soon as the wheels stop, the PTO stops turning. An independent PTO receives rotation from the engine crankshaft. Therefore, the higher the engine speed, the faster the shaft rotates.

In addition, there are tractors with PTO synchronous type. The speed of rotation of the synchronous shaft directly depends on the gear ratio of the transmission of the moving tractor. Synchronization of movement and rotation is required when the unit is working with sowing equipment.

Making a three-point hitch

The hitch is used for connecting additional equipment to the tractor, for example, a plow.

The hinge must be movable both in the horizontal plane and in the vertical. In the first case, mobility helps to reduce the overhang of the nozzle when taxiing. Vertical movement of the suspension is required to lower the equipment into working condition or raise it to the transport position.

A hitch on a minitractor is made from various parts taken from old agricultural machinery. It is quite difficult to make a description of how to make a three-point hitch at home. Therefore, it would be more correct to use the following video, which indicates the dimensions of all parts of the device.

Selection and installation of brakes and clutch

Brakes must be installed on the rear wheelset. Easiest to take ready-made blocks from the UAZ car. The brake pads must be installed on the wheel disks, and the control should be brought to the pedal or lever installed inside the cab.

To install the clutch on a homemade mini tractor, you can also use a ready-made option from any car. For example, you can use belt clutch from Moskvich or UAZ.

The clutch unit is attached to the gearbox, also taken from any car. You can see how the clutch is installed in this video.

Steering installation

It is quite difficult to make a steering mechanism on your own, and in principle it makes no sense, since all the parts can be taken from any car.

When installing the steering mechanism, the steering shaft with the gear is connected to the steering arms, which are on the steering knuckles mounted on the front beam (the manufacture of the beam was discussed above).

How to make a cabin for a mini tractor

If in the summer it is possible to work on a minitractor even without a cab, then with the onset of the autumn-winter period, the use of the unit becomes rather uncomfortable or even impossible. Therefore, craftsmen are trying to assemble tractors with cabs in order to use this technique all year round.

Cabin for homemade equipment is made sheet steel according to a pre-prepared drawing. As a basis for calculations, you can take the cab from the MTZ tractor. The following photo shows a drawing, based on which you can make a cabin yourself.

Advice! If the dimensions of the cabin on the drawing do not fit the dimensions of your mini tractor, then they must be changed. But the main thing to consider when correcting dimensions is the size of the windshield and the height of the cab. Its ceiling should be 25 cm higher than the head of a person sitting in the cabin.

The cabin is made as follows.

In general, in order to better understand how a mini tractor is made with your own hands, you can watch this video, a kind of beginner's guide.

The nuances of manufacturing a caterpillar tractor

Homemade tracked mini tractors are a technique whose main feature is high maneuverability and good maneuverability. Also, a tractor on tracks creates minimal pressure on the soil, which cannot be said about its wheeled counterpart.

To make a crawler mini tractor, you will need the following structural elements.

Frame. It is made from a profile pipe or channel.
Engine. For a tracked mini tractor, it is better to use a diesel engine.
Main bridge. As in the manufacture of a wheeled tractor, a ready-made axle from an old car can also be used for a caterpillar unit, which should be shortened.
Transmission. The ideal option would be a box from the GAZ-53.
Clutch. A clutch unit from a GAZ-52 is suitable.
Caterpillars. They are made from tires from the wheels of large-sized equipment, for example, from a tractor.

For making caterpillars you need to take 2 tires from the tractor and cut off the side parts on them. Then these tires are put on the wheels mounted on the frame, as shown in the next photo.

To make the tractor turn, on the rear axle you need to install a differential that will disconnect the right or left wheel from the drive. Also, each wheel must be equipped with a brake controlled separately. When you press the brake pedal and switch the differential, one wheel of the drive axle stops, while the opposite one continues to rotate. Due to this, the tractor turns in the right direction.

As you understand, the name of the mini-tractor is a joke, in fact, components from VAZ-2102 and UAZ cars were used.

How long did it take to build a tractor?

The tractor was built from scratch, having spent almost two years on work. For its construction, a working VAZ-2102 car and an abandoned ZAZ-968, a decommissioned and half-rotted frame of a UAZ truck, had to be destroyed. Instead of the cut back of the frame, segments of 100 mm channel are welded on.

The photo shows bushings welded to the bottom of the frame, those above the fenders of the front wheels. This is a fastener for a pusher knife, for example, for cleaning snow. For heavier purposes, it is hardly possible to use it due to the low weight of the tractor (about 700 kg).

Three arcs are welded on the hood panel. They serve as handles if you need to climb onto the hood or bumper. They are also limiters when carrying cargo on the hood. It is designed in such a way that it can withstand a weight of 100-150 kg. For example, several bags of potatoes.

What exactly is used from the VAZ-2102?

From the VAZ donor, the entire power unit was used as an assembly: engine, gearbox, clutch control, pedal assembly, electrical equipment, instruments, lighting equipment.

To reduce the speed of the tractor, a reduction gear with a reduction ratio of 3.5 was used. This is an onboard gearbox from an electric car. The connection of the gearbox with the gearbox using a shortened UAZ cardan. On one side of the cardan is a VAZ connection with a rubber clutch, on the other side is a UAZ cross. Connection of two fragments of cardan shafts by welding after preliminary adjustment on a lathe. The connection of the gearbox with the rear axle is direct "flange to flange". Operational practice has shown that this is not the best solution. It would be necessary through a rubber clutch.

What is used as a rear axle?

Rear axle used from UAZ. The long stocking is shortened to the length of the short stocking so that two standard short half shafts can be used. It is quite simple to make a short one from a long semi-axis: a flange is cut off, a hole is drilled in the center on a lathe, the semi-axle cut is processed and inserted into the hole and scalded from the outside, the excess is cut off.

The cut stocking is connected by welding, the chamfer is preliminarily removed on the cut. Boil in a circle several times until the chamfer is filled, then boil from above until a good weld is obtained. Then a gas burner warms up the place of welding to a dark red glow and cool in air. For insurance, a caliper is superimposed on the welding site, indicated by the number 2 in the figure. This is in case there is an impact on the rear axle. In fact, the stocking must be removed from the crankcase of the bridge, but there are problems with drilling the plug, knocking the stocking out of the crankcase, then somehow shortening and turning on such a lathe, which are not very common.

Attaching the axle to the frame using a V-shaped structure (number 3), supported by standard rear axle cushions and fastened to it with stepladders.

How is the front axle.

The front axle is welded from thick-walled pipes, the wall thickness is 8 mm. Probably drilling. (See the picture below) At the top of the side racks, there is a swivel device made of VAZ wheel bearings. Bearings top and bottom. From above it is closed by a cover, through it there is a rotary axis. It is fixed with a Zhigulev hub nut. The front hubs from ZAZ-968 are embedded in the lower - swivel part. How to do this is clearly visible in the figure on the right. Here it should be noted that it is necessary to install both long pivot pins. In addition, the fingers are made motionless by welding. It's rude, but they won't be needed anywhere else. Sleeves are made to pass through the pipe rack, which are welded there, and the fingers are simply inserted into them and fastened with nuts and locked.

The lower figure shows the steering rod. There originally stood from Zaporozhets, but it turned out to be rather weak. I had to replace it with a GAZ-53. Now you can tow it for it. Steering levers are welded into movable pipe racks. Also from GAZ-53. For durability, they are fixed with scarves.

Fasteners for the wings of the front wheels are welded onto the front axle racks. Mounting levers - two.

The swing axis of the front axle is made on the steering knuckle from the GAZ-53. It is better to do it on a fist from ZIL. It is more powerful and does not deviate to the side when turning, because. the GAZ beam has a bend, while the ZIL does not have this bend. The fist is made removable from the beam of the bridge. It is welded into the crossbar of the frame.

In the figure above the front beam, you can see the fenders, which are cut off from the rear of the frame.

What about the brakes and steering, the radiator?

The main brake cylinder was used from UAZ (GAZ-53). Zhigulevsky turned out to be small because of the rear UAZ working cylinders. It is clearly visible in the picture on the right. Next to it is the clutch master cylinder.

The steering gear and steering column are from UAZ, and the steering rod is also from it. A crossbar is welded into the frame for mounting the steering gear.

The engine cooling system works with a VAZ radiator. It is mounted in front of the engine with an inclination.

How was the cabin made?

The cabin was made separately and fixed to the frame with eighteen bolts through welded bosses. There is a seat on the cab.

A pedal assembly, an instrument panel, brake and clutch master cylinders, and electrical equipment parts are fixed on the front wall of the cab.

The rear wall of the cab is a gas tank. Tractor rear light boxes are welded to the left and right of the gas tank.

Owners of farms, summer residents who have fields larger than 10 acres, need the help of agricultural machinery. Of course, not everyone can afford to buy a factory mini tractor.

However, in the villages you can often find old Zhiguli, which have already outlived their usefulness, but which still have hope for a second life.

It is on the basis of this car that a wonderful mini-tractor can be constructed, which, in terms of its characteristics, will not be inferior to purchased specimens.

Do-it-yourself minitractor from Zhiguli is a great option for those who do not want to spend money on expensive equipment. In this case, the motor can be taken from different car models - VAZ 2101, VAZ 2106, VAZ 2109, and many others.

Where to begin?

As a rule, the design of any homemade product begins with the creation of a drawing. The diagram will help you accurately calculate all dimensions, mark the connection nodes, outline the shape and number of parts. Without a drawing, by eye, you are unlikely to be able to do everything correctly and efficiently the first time. So don't skip this step.

When working on a drawing of a mini tractor from a Zhiguli, consider the following points:

the front suspension should be made reinforced;
the engine must be placed under the driver's seat;
be sure to indicate changes in the chassis;
the motor in a minitractor from a Zhiguli must be covered with a casing;
mark the place where the fuel tank will be located;
if you create a shortened frame, the tractor will be compact and economical in fuel consumption;
if you decide to reduce the frame, then consider the moment that the bridge will also be displaced.

Work process

If you decide to make a minitractor from a Zhiguli, then in the end you will get a fairly powerful machine with excellent performance. Such a unit will become a real assistant in the performance of any work on the cultivation of the land and caring for plants.

So, a mini tractor can be made with an engine from a VAZ 2106 or an internal combustion engine VAZ 2101, but you will also need the following parts, which you can definitely borrow from other machines:

The gearbox can be taken from the GAZ-53;
The rear wheels will fit from the MTZ-82, and the front wheels can be from an old cultivator or walk-behind tractor;
From the same VAZ 2106, you can take the steering and driver's seat;
From the Zhiguli, the front and rear axles are taken. However, it is important to adjust their dimensions to the dimensions of the future homemade product.

Stages of creating a mini tractor from VAZ:

A kinetic scheme is created. An important step that should not be skipped;
Frame manufacturing. After adjusting its dimensions, it is necessary to carefully process the welding seams. If you do not have a finished frame, you can easily make it from channels and corners. It is important after its manufacture to inspect the metal for rust. You will also need to prime the frame in several layers;
Let's get to work on the manufacture of the chassis. You need to inspect all components very carefully, as well as carefully check the brake system;
If you change wheels to more bulky ones, you will need to find suitable axles and brakes;
The engine is mounted;
A protective casing for the engine is being created;
Mounted seat for the driver;
Steering is installed;
Attachment points are created for future mounting of attachments.

Important Points

If you decide to make a homemade mini tractor from Zhiguli, you should know some important points. Such a technique will be a great helper, and at the same time you do not have to spend a lot of money on its manufacture. But you must consider some legally important points:

If you buy an old Zhigul for homemade, then a re-registration procedure must be carried out;
After this procedure, you must notify the traffic police about the planned work. There will be issued an act on the delivery of rooms;
After you create a Zhiguli minitractor, you need to register it and get new license plates. But most often, on such transport, farmers move exclusively around their plot or between fields, so such registration can be avoided.

As you can see, making a mini tractor from Zhiguli is quite simple. It is only important to think over every moment, prepare all the necessary details and tools. Many owners of such homemade products note the excellent performance of the machine, its ability to work in the fields. But the important thing is that you assembled it yourself, and, therefore, if a breakdown occurs, you can easily find and fix it.

Source: http://pro-traktor.ru/minitraktory/samodelki-iz-minitraktorov/iz-zhigulej.html

How to make a tractor with your own hands (homemade)?

The advantages of homemade tractors are obvious. Each person can make them on their own, the cost of parts for such devices is lower than for factory ones, they do an excellent job of processing small plots of land. In addition, many parts for a homemade tractor can be found on your farm.

Let us consider in detail the question of how to make a tractor with your own hands.

Preparation of drawings

Despite the fact that any tractor, whether it is a standard size or a motor-tractor, consists of at least hundreds or even thousands of parts, anyone who can master the diagram shown in the form of a simple drawing can assemble it on their own. Thanks to the schematic drawing, assembling a tractor with your own hands is similar to a standard constructor, where element A is connected to element B, then part AB to element C, and so on in a chain.

Drawing of a homemade mini tractor with a breaking frame

Although, it is worth noting that in our country there are probably enough self-taught masters who can “keep the drawing in their head”, that is, perform the same sequential actions as with the drawing, just follow the imaginary instructions. However, this does not apply to everyone. Anyone who does not have such experience is unlikely to be able to assemble any kind of structure without turning to a pre-blackened scheme for help.

In case you had a “bad relationship” with drawing at school and you are not able to organize a drawing of a full-fledged home-made tractor, ask your acquaintances, friends or relatives who understand this business better than you. In extreme cases, Google-search will help you find any information.

Before you start drawing the diagram yourself, decide what kind of tractor you want to make, on the basis of what it will be made. So, for example, homemade tractors can be:

They are made on the basis of:

motoblocks. A tractor from the Niva is very popular in Russia (one of the most famous walk-behind tractors in the Russian Federation);
automotive engines. Moreover, motors of both passenger cars and trucks, cargo-passenger can be used. By the way, the engine from the GAZ-66 is very suitable for making a homemade tractor with your own hands, which will have high power. Often there is a tractor from the UAZ;
UD-2 - a universal engine used as an additional motor in installations that are equipped with an electric generator, as well as as an engine in a home-made tractor;
popular among the people homemade tractor 4 × 4. Homemade tractor 4 × 4 is also called a break.

Having decided on the above question, you can safely proceed to the drawings. At the same time, after creating the scheme, be sure to make a list of the available parts and assemblies, and a list of those items that need to be purchased, after which, buy the missing parts. Only after the entire list of parts is in your garage, you can begin to assemble the structure.
to the menu

Design features

How to assemble a tractor with your own hands? There are no great difficulties in this. If you correctly drew the diagram and prepared all the necessary details, making a tractor with your own hands goes into the practical part. The difference between modifications and options depends on the means and skills that you have. Below we describe the most optimal design:

Frame. Its main elements are spars (left, right) and traverse (rear, front). The front steps are made of channels No. 10, the last one is made of a square-shaped steel pipe with sides of 8 × 8 cm.
Preparing a frame for a homemade mini tractor
Engine. It is worth choosing a power plant that is suitable in terms of torque and power. Make no mistake if you take a 4-cylinder water-cooled machine with diesel fuel.
The gearbox and PTO transfer case, as a rule, are taken from the GAZ-53, and the clutch, or rather its mechanism, from the GAZ-52. In order for the clutch basket to properly dock with the motor, you need to weld a new casing, remake the flywheel. The latter is processed on a lathe, the back plane is cut off, an additional hole is machined in the center.
The bridge is usually integrated without much change. Fastening to the frame is carried out thanks to 4 ladders. A variation of the compound driveshaft from any car is allowed.
Steering. Hydraulics require an oil pump to provide pressure. It is placed near the drive shaft. It is better if each wheel of the drive shaft is controlled by a gearbox. Distributor for 4 workers. positions of the standard type will set the direction of rotation (these are mounted on the MTZ-80).
Installing the wheel part on the hubs is not difficult. The central part is cut out of the disk with mounting holes, the center of the ZiL-130 disk is welded in its place. The front axle is made independently, because. he is not leading and does not require special knowledge. Many rearrange the finished bridge from other vehicles.

If you opted for making a caterpillar tractor with your own hands, because it does not damage the upper fertile soil layer during operation, to simplify, buy a new module equipped with wheels and a seat.

Alternatively, all elements can be assembled independently at home. However, such a design will be deprived of a drive. The assembled, do-it-yourself caterpillar tractor is controlled by turning the transmission-motor unit.

The walk-behind tractor should be supplemented on a hinge with a module with a seat; for earthworks, it is also necessary to take care of the hitch. To implement this option, assemble the frame using a wheelset and rolled metal. Then install two trailer knots, a seat on it. Do not equip the wheels with shock absorbers, this will negatively affect the speed of the device.
to the menu

There is no single recommendation on what to take as the basis for the future unit and how to make a home-made tractor, which is affected by the presence of this or that equipment in your household, from which a home-made product will be constructed. Therefore, it is advisable to consider various options. If you do not have a walk-behind tractor made on the basis of the Zhiguli, the tractor will become a much better assistant.

Homemade tractor with a motor from Zhiguli

Tractor based on Zhiguli

To build a tractor from a Zhiguli with your own hands, first of all, develop a kinetic scheme that takes into account the balance of the structure.

The device will include: engine, rear and front axle, reverse gear, driveline. The engine will drive the front wheels.

Through the chain, the torque will be transmitted sequentially to the gearbox, driveline, etc. The driving rear wheels, as a result, will rotate.

The frame is made of pipes and corners. Make sure the fork and bushing are correctly positioned to allow the trailer to turn. The body is made from sheet metal. The height of the sides should not exceed 30 cm.

Many craftsmen prefer to complete a homemade tractor with a Chinese engine. Lifan, Forza, Zonshen are taken as a basis. However, experienced designers recommend installing a reliable UD-2 or D-21 motor.

In the first case, the engine develops power up to 8 hp, in the second - up to 25 hp. Together with a 4-stroke system and air cooling, such equipment is not only successfully used for agricultural activities, but also for transporting goods.

Consider the option with a D-21 diesel engine.

To create a frame, take a pipe from a stacker. Pre-cut the half-frame borrowed from the T-25, weld a pipe to its front part, and a metal sheet 3.5 × 50x50 cm to the back.

A hydraulic tank and a hitch with a hydraulic cylinder, which are also taken from the T-25, are attached to the sheet with the help of bolts. It is better to purchase the front axle in the factory version, otherwise there may be problems with the axle shafts.

Take rims from GAZ-52, tires from Belarus 82 (8.3 × 20), which is manufactured by the Minsk Tractor Plant.

Homemade tractor with diesel engine

The front wheels on a homemade tractor with a D-21 engine are installed from T-25 (6.00-16). The hood, the beam are native, but you need to take care of the fuel tank. To do this, weld a 40-liter container from a 3-mm sheet.

Place the finished product on the back of the tractor under the seat. Turn the adapter plate under the GAZ-52 gearbox. As a clutch, they take a basket, a fork and a release bearing from the Yenisei combine. First remove half of the springs.

Any disk included in the clutch is suitable (both from GAZ and from UAZ).

Turn a 3 mm seat under the basket in the flywheel. The input shaft of the gearbox must be lengthened by 12.5 cm, shorten the driveline from the GAZ-52. The connection must be collapsible. Buy a steering column from GAZ-52.

Hydraulics for a home-made tractor is assembled from a R-80 hydraulic valve with a floating effect, an NSh-10 pump. It is placed through the fork connection in front of the engine.

First replace the standard bolt responsible for fastening the motor pulley.

It is not necessary to install the pump on the gearbox through the power take-off, because when the clutch is pressed, the hydraulic system will turn off, the rotation speed will be unsatisfactory.
to the menu

Tractor based on Oka

Do-it-yourself tractors from Oka are made according to the same principle as from other Soviet cars. It all starts with the construction of the frame. Stock up on sheet metal and metal beams of the channel.

Tractor with breaking frame based on Oka

The design is a standard rectangular shape welded from metal corners. The front and rear axles are assembled from the constituent parts of the Oka. The device is assembled with an engine from Oka. However, before installing the motor, the wheel clearance is increased to improve cross-country ability.

The rear and front spars are reinforced as they bear the brunt of the load. A hitch mechanism for mounting attachments should be provided.

Drawings for further assembly can be found on the Internet.

If you do not have the specified machine, it is not necessary to buy a new vehicle, the unit will also work in a non-working state, since its individual elements are used.
to the menu

It's no secret that agricultural work takes a lot of time and effort. Some save themselves from such loads by buying walk-behind tractors, cultivators or mini tractors. But, unfortunately, many do not have the opportunity to purchase such equipment, so they are looking for ways to make it on their own. To date, there are plenty of options for its manufacture, the main thing is to have at least minimal technical skills and abilities. Now we will talk about one of these methods, namely, we will tell you how to make a mini tractor from a Zhiguli with your own hands.

Principles and all the nuances of homemade

It is not so difficult to make a minitractor from a VAZ. The main thing is to understand what you are doing and clearly adhere to all schemes and drawings. Now we will tell you in more detail about all the stages of work.

Mini tractor drawing

As mentioned above, the drawing and diagram of the future unit is of great importance in the manufacture. After all, having missed something from the view or memory, it will be very difficult to restore the entire structure. Be sure to start drawing and calculating schemes, consider the following nuances:

the engine must be placed in front of the driver's seat;
the motor must be covered with a manufactured casing;
a shortened frame will make the equipment compact and economical in fuel consumption;
if you reduce the frame - do not forget about the displacement of the bridge;
determine the location of the fuel tank;
remember that the front suspension needs to be made reinforced;
be sure to indicate the changes in the chassis.

The project implementation consists of the following stages:

Work on the kinetic scheme.
We make a frame.
We make a body.
Installation of the engine and other systems.
We fix the steering.

Now we will analyze what specific parts will be needed to work using the example of a VAZ engine model.

With engine from VAZ 2106

The mini tractor from the Zhiguli 2106 will please its owner with good endurance and will become an indispensable assistant for performing various kinds of agricultural work. To make such a unit, you will need not only an engine from this brand of car, but also parts from other faulty cars, namely:

with GAZ-53 you can borrow a gearbox;
we take the front and rear axles from the Zhiguli, only in this case it will be necessary to adjust everything to the dimensions of the homemade product;
steering and driver's seat can be borrowed from VAZ 2106;
the rear wheels will give us MTZ-82, and the front wheels can serve from a motor cultivator or a motor block.

Stages of work

We carry out a thorough inspection of the frame. If there is rust, we remove it with sandpaper and do a primer in 2 layers.
According to the scheme, we shorten the frame, having previously cleared the place of its trimming. After welding, all seams are cleaned and degreased, primed and treated with an anti-corrosion coating. If there is no finished frame, it can be made using channels and corners.
We take care of the running gear. First of all, we check all the nodes, carefully examine the brake system.
When replacing wheels from automobiles to more bulky ones, you will need to install the appropriate brakes and axles.
Installing the engine.
We weld the protective cover.
Install seat and steering.
We attach attachment points for future use of attachments.

Such a step-by-step work is suitable for creating a mini tractor from a VAZ of any brand: VAZ 2101, VAZ 2109, VAZ 2106, with an internal combustion engine VAZ 2101. So draw a diagram of your dream mini tractor and get to work.