How to make slime at home - different ways from improvised means

How to make slime at home - different ways from improvised means

Today, probably everyone has heard about this funny toy. For millions of children, an interesting multi-colored chewing gum is one of the most favorite toys. As it turned out, making a slime at home with your own hands is quite simple.

You need to figure out what a slime is, and consider a certain number of options on how to make slime houses, on your own with your own hands.

What is "Lizun"

Slime - so Lizun was originally called. The creators of the toy are Mattel. Date of birth of the toy - 1976. They began to call the toy Lizun in the 90s of the twentieth century, when the cartoon "Ghostbusters" was released on the screens. One of the cartoon characters was Lizun (ghost).

He was too similar to Slime: the same green, easily passed through the walls. And on the surface, after it, there was a sticky mucus, a greenish tint.

One to one, just like Slime, slime is a soft jelly-like substance that can easily change shape, but does not melt in the hands. It can be both hard and elastic, if there is a sharp or strong impact, it sticks to the surface of the ceiling, flows down the wall, leaving an unattractive mark after itself. If there is a desire, the toy can take on a variety of forms.

When the child has played enough, the toy is placed in a jar. If stored, in compliance with the rules, for a long time it can be used.

According to psychologists, the Lizun toy is a wonderful anti-stress. With its help, the baby can relax. His imagination will be busy. The child will grow up with a good imagination. In addition, with the help of Slime, motor skills, motor activity begin to develop perfectly, and the nervous system strengthens. There is a training of memory, vision, attention.

Lizun is great entertainment for kids.

Children not only have fun playing with slime, but also get rid of stress. The nervous system receives a beneficial effect. The small muscles of the hand, during the game, develop well, as well as motor skills.

The toy has a gel consistency. It cannot melt, but can take the most unexpected form.

In every store that sells toys for children, you can buy slimes. But you can make this toy yourself at home. Why not do it with your child? It's not difficult at all.

This process will not take much time. Here, too expensive materials and tools are not needed. It is worth considering those options that are affordable and interesting to make this interesting toy.

How to make a slime with your own hands at home

The easiest way: starch slime

This recipe is simple and safe. This result is achieved because there is no boric acid, glue and detergents. If you make a slime using starch, the process steps will be simple. All actions are easy to do for both a child and an adult.

What you need (materials):

• potato starch (150 g);
• warm water (75 ml);
• food coloring (2.5 g);
• You need to prepare a bowl and a spoon to mix the ingredients.

Step by step instruction:

1. Pour starch into a bowl.
2. Add dye. Mix it with starch.
3. Slowly pour in the water, while stirring the composition.

At first glance, at first, it will seem that the slime did not work out, and this is a simple jelly. But when the stirring is prolonged, it will be seen how the liquid has become an elastic slurry.

Lizun, which is completely safe, can be played with. For a child, usually, the resulting toy is of interest for the first two days.

Then you have to do everything again, in accordance with the recipe, to get a new slime.

Sparkling slime made of PVA glue with glitter

To make slime using glitter, you need to have on hand:

• glue that contains glitter (100 ml);
• water (250 ml);
• borax (1 tsp);
• water (1 tablespoon)

Pour water into a glass. Stir, in it, borax. Pour glitter glue into a bowl. All. Here you need 1 tablespoon of water. It is poured into a bowl of glue.

Mix well so that the mass becomes flexible and pliable. After that, a solution of borax is introduced, and kneaded to the required consistency to make Lizun.

Slime without sodium tetraborate and without glue with detergent

In the event that going to the pharmacy is not in the plans, and you want to make Lizun right now, this option is more suitable than others.

The manufactured Lizun, outwardly, is almost indistinguishable from the purchased one. Since the manufacture of this type of slime requires the use of detergent, you will need to wash your hands thoroughly.

Need to take:

• dishwashing liquid
• bowl for mixing ingredients
• hand cream
• dye.

How to do:
In a ratio of 1: 2, you need to combine dishwashing detergent with soda. Mix everything well.
Add hand cream. Mix the mass. How much glue is needed will be seen when the ingredients are mixed.
Pour in the dye.

Once all of these components are mixed, you should pay attention to the mass. It should be slightly runny.
Slime, which is not yet 100% ready, should fall asleep in a bag. Then, for 4 hours, send to the refrigerator. As time passes, they pull out a toy and have fun with it.

How to make slime from shampoo

A funny slime can be obtained if you use an ordinary shampoo, add dyes and polymer glue (Titan is great)
Shampoo (100 ml) is poured into the container.
Pour in food coloring (1 tsp).
Stir.
4 tablespoons of glue are combined with colored shampoo.

The resulting liquid mass is poured into a bag, and wrinkled by hand to obtain the required density.
They pull out the substance that turned out. All! Slime from shampoo for children is ready. Put in a container with a lid to keep the toy there.

The most harmless - from wheat flour

If you take flour, the fun for the kids will be absolutely harmless. What to do?

• Sift 2 tablespoons of flour through a sieve.
• Pour 50 ml of cold water on top.
• Then 50 ml hot (boiling water should not be used).

• Mix the ingredients to get a uniform consistency.
• Pour in food coloring (3-5 drops).

• If desired, add salt or sugar.
• Mix the dough until the whole mass acquires one shade.
• Place in refrigerator for 3 hours.

• Take out.
• They knead with their hands.

Lizun from alcohol and sodium tetraborate

Yes, this method cannot be called standard. But what fun it is to make this toy! Only, so that the result does not disappoint, you should not “depart” from the recipe.

Need to stock up:

• polyvinyl alcohol;
• water;
• Sodium tetraborate (brown);
• Dyes (if desired).

It is not a problem to buy a borax in a pharmacy. It is sold without requiring a prescription. The price of the funds is low. It should be noted that polyvinyl alcohol is sold as a powder, not a liquid. This ingredient is the most important in the recipe. That is why, in this case, neither vodka nor medical alcohol is suitable.

What to do:
Pour polyvinyl alcohol into a bowl (a little). Mix. Put on fire. Cook for 40 minutes. In this case, it is necessary to stir all the time. To prevent the mass from burning, the fire is made weak. After the bowl is removed from the heat, the mass should cool.

Preferably at room temperature. When the alcohol was allowed to cool, at this time the other components are mixed. Water is poured into a glass.

Pour in 1 or 2 tablespoons of sodium tetraborate. Everything is thoroughly mixed until the borax crystals are completely dissolved in the water.

After that, the liquid that has turned out must be filtered. Add alcohol (it will have cooled down by this time), in a ratio of 1:3. Mix well. If desired, add food coloring. You can use the toy!

Colored slime made of glue and borax with water

This method has gained popularity. A lot of different ways have been devised. And what only ingredients are not used! One of the methods can be considered in detail.

Have to take:

• warm water (200 ml);
• a jar of PVA glue (or two);
• food coloring;
• borax (2 bottles).

Shake the tube of glue before starting to work. Then it is poured into a deep bowl. (You can also use an ordinary glass jar.)

You will need another bowl. There they mix water with dye, and pour it into a jar of PVA. Until a homogeneous mass is obtained, all components are mixed.

After that, boric acid should “go” into the mass containing glue. As a result, it will be seen how the mixture becomes viscous and dense, in consistency. After the viscosity appeared, and the mass became thick.

It must be kneaded by wearing gloves. If they are not at hand, then they are mixed in a plastic bag. The resulting slime is laid out on a leaf, for half an hour or an hour. All. The child can play.

How to make from plasticine with gelatin

Plasticine, as a rule, is in those houses where children live. It is this material that will come in handy to make a popular toy. Everyone will be happy with the result!

What will have to be prepared from materials and tools:

• 1 pack of plasticine;
• 1 pack of edible gelatin;
• a spatula to mix the ingredients (or a spoon);
• jar or bowl for mixing;
• iron bowl to heat gelatin.

How to do:
First, pour gelatin into a bowl of iron. Fill with cold water. Mix thoroughly. Leave for 60 minutes. As time passes, you need to heat the gelatin that has been soaked. Bring to a boil, and immediately set aside the container, removing it from the heat.

You need to take a container (better - plastic). Using a spatula, mix water (50g) with plasticine (100g).
In the resulting mixture, slowly, you need to pour the gelatin, which is already prepared. Mix with a spatula to get a plastic, homogeneous mass.

The bowl with the mass is placed on the shelf of the refrigerator so that the product is completely frozen. After that, you can get and give the child a slime.

Slime made from perfume and hand cream

If you take a hand cream, you can get a slime. But there is no 100% guarantee. But why not take a chance?

• Squeeze cream into a bowl.
• Add dye. Stir.
• Spirits are added little by little. The resulting mixture is stirred. She should start to thicken.
• As soon as the desired consistency is obtained, the toy is kneaded with hands.

funny transparent slime

To make such a toy, there will be no difficulties. For its manufacture, you need to prepare the following components and materials:

• Transparent PVA glue (100 ml). It is sold in stationery stores.
• Boric acid, in powder form (1 tablespoon);
• A bowl for mixing the ingredients;
• Wooden stick or spoon.

Step-by-step instructions for making at home:

1. Pour glue into a glass jar.
2. Send boric powder there.
3. Mix thoroughly so that a homogeneous elastic liquid is obtained.

All. Slime can be played with. Only the child needs to be told that they will need to wash their hands with soap after the game.

simple toothpaste slime

What you need to have to make this toy:

• Tube of toothpaste.
• Cup.
• Food dye.

Step by step instructions for making slime at home:
Squeeze a tube of toothpaste into a glass. It is advisable to buy either a gel or a thick consistency paste. Send dye into a glass. If you add more of this component, the shade of the slime will turn out to be saturated.

To get a homogeneous mass, you need to thoroughly knead the mixture. It is necessary to watch that all the grains of the dye dissolve.

As soon as a homogeneous mixture is obtained, it is necessary to send it to a water bath for 15 minutes. This is quite enough. You need to do this to eliminate excess moisture. As a result, the mass will acquire a dense structure.

Care must be taken to ensure that the slime does not turn out to be very dry. To prevent this from happening, it is advisable to smear your hands with oil and knead the toy. The size of the slime will depend on the amount of toothpaste used.

Lizun soap and toothpaste

To make a toy, you need to stock up:

• toothpaste
• liquid soap;
• dry dye;
• flour.

Step-by-step instruction:

Soap and toothpaste are mixed in a 1:1 ratio.

Mix the dye with flour. When flour is added, it is necessary to mix the mixture, without stopping. If you take soap and paste, in the amount of 20 g (of each component), then 5 tsp of flour is enough.

When all the flour is poured out, the whole mass is thoroughly mixed so that the dough does not acquire a uniform structure.
It is advisable to pour a little water. Then the mass is kneaded until the slime becomes viscous.

Easy way to make slime with hydrogen peroxide

Since the cost of making such a toy is low, this method has become very popular. But some people are disappointed because they were hoping for a different result. According to this recipe, the toy will turn out to be hard, but it will jump well.

You will need:

• 1 glass of water;
• 100 g of starch or soda;
• 100 g of PVA glue;
• hydrogen peroxide;
• dye.

You need to have a medium sized container. There it will be necessary to mix water with soda (or starch), in equal proportions. It is necessary to get a jelly-like state of the mass. Then you need to pour in the glue. Mix well.

Hydrogen peroxide must be poured into this mass. Add dye. Mix again. It should be noted that the slime, as a result, becomes airy precisely because of hydrogen peroxide. If it became clear that the mass is too thick, it is necessary to change the proportions by adding more water.

Slime, using washing powder

To make such a slime, you will need to use a liquid analogue of washing powder. No need to try using gel or liquid soap. The toy will not work, because the consistency will be different.

Before you start manufacturing, you must have:

• PVA glue;
• liquid washing powder;
• food coloring;
• thin rubber gloves;
• container.

Manufacturing steps:

Pour PVA glue (1 cup) into the prepared bowl. You can add more, or you can use less. It will depend on what size you want to make the slime.

Drop 5-6 drops of food coloring into PVA. Stir until the mixture has a uniform color.

Take 2 tbsp. liquid laundry detergent. Pour into mixture. Mix the solution well. You will see how, over time, it becomes sticky. It is necessary to bring the solution to the state of putty. If the solution is too thick. Drop by drop, liquid powder should be added to dilute the mass.

Put on gloves. Remove the solution from the bowl and start kneading it like dough. It is necessary to get rid of excess drops of powder.

If this is not done, the slime will be similar in consistency to soft rubber.

The toy must be stored in a closed container. When it became clear that the toy was losing its properties, it should be put in the refrigerator for three to four hours.

How to make slime from magnets

The magnetic slime is considered an original toy. He will be able to emit a glow in the dark. You can make such a toy yourself at home.

• Neodymium magnets;
• boron;
• water;
• glue;
• iron oxide.

Pour 1 glass of water into a bowl. Add 0.5 tsp. burs. Mix well to completely dissolve the boron in the water. You will need a mixture to activate the second half of the composition.

Pour 1 cup of water into another bowl. Add glue (30g). Mix well. Pour in the paint. In order for the slime to please with a glow in the dark, it is desirable that phosphor paint be used.

In the mixture where the glue is poured, gradually, a solution of boron. In this case, all the time it is necessary to mix the adhesive mixture. At the moment when the mixture begins to harden and acquire the desired consistency, the boron solution does not need to be added. What's left is poured out.

The slime that will turn out must be leveled on the table, or board. Iron oxide is poured into the center of the toy (a little bit). Knead the slime until it is all gray.

The magnetic toy is ready. When the slime comes into contact with the magnet, it will crawl after it.

DIY shaving foam slime

As is clear from the title, the main component in the manufacture of the toy will be shaving foam. The recipe is popular because it is simple.

You need to prepare materials:

• Shaving foam (150 g);
• 100 ml of PVA glue;
• Medium bowl;
• Spoon for mixing components;

How to make slime at home from men's shaving foam:

Pour glue into a container.
There, gradually pour in the foam. The key word is "gradually".

When the slime has become viscous and elastic, this indicates that enough foam has been added. That is why 150 g is a rough guideline. The person who makes the slime must take control of the amount of foam.

The components are mixed until a ball is formed, the structure of which is dense. It shouldn't stick to your hands.

Then the slurry is crushed until the structure becomes elastic. If the slime is mixed well, it will not stick to your hands.
If you want the toy to be bright and beautiful, add food coloring during the manufacturing process.

What to do if the slime did not work out

In the event that the slime failed to do so. As intended, all errors are easily corrected.

1. To give the toy elasticity, you need to add a few drops of vinegar. Then it will stretch better
   If you add a few drops of hydrogen peroxide, the mass will turn out more magnificent. Usually, this is done when making fluffy slime.
2. To make the slime slippery, you need to apply glycerin.
3. A luminous toy is made using fluorescent paint.
4. When the slime turned out to be very soft, they put it in a jar, pour a little salt on top. Close the lid. So the toy should stand all night. The toy will become elastic, as the salt will absorb excess moisture.
5. When the slime turned out to be hard, you can soften the structure if you put a slime in a jar, and after adding water, leave it overnight, under the lid.
6. To give the toy a pleasant aroma, it is advisable to use essential oil, vanillin or food flavoring.
7. When adding the smallest sawdust or iron oxide, you get a magnetic slime. The toy must be kneaded well for even distribution of the additive. As a result, the toy will reach for any magnets.
8. An "anti-stress toy" will turn out if the mucus is in a balloon. Do this using a large syringe without a needle.
9. In order to make the slime larger in size, it is placed in a bowl of water for 3 hours. Do not worry if it breaks into several parts. All according to the rules. You need to add a little cream for the body or hands and salt. Mix. The slime will become elastic and increase in size.

On a note! You can add foam balls of different colors to the toy. This will not only increase the size of the slime, but also make it brighter.

Lizun care rules

The toy, from which both children and adults are delighted, sticks to surfaces and leaves no traces, after itself - this is the famous slime. It can be compared to thick jelly or jelly.

Make it using a jelly-like material. That is why, over time, it ceases to be elastic and attractive.

If you know the rules for caring for a slime, you can extend its life. It is necessary that the toy be “tidy”. To make it fun to play with.

Where to store

For the slime, it is necessary to allocate a separate container in which there is a lid. Store it on one of the shelves of the refrigerator. Storage in the freezer is excluded.

How to care for slime

The main thing to adhere to is to ensure that the slime is not dirty. Slime has sticky properties, so small particles of debris easily stick to it. It is desirable that the toys were not in those places where there is dust.

For example, dust accumulates under the sofa. Do not allow the slime to come into contact with surfaces covered with pile. In case of contamination of the slime, the garbage is removed using alcohol. The second option is to remove it carefully using tweezers or a needle. You can remove debris with your finger, if possible.

Lizun "does not like" if the air in the room is too dry, or vice versa - very humid. If the room is dry, it can become hard and lose its sticky properties. And if there is excess moisture, it swells and becomes more humid.

How to act in such a situation? What to do so that the shape of the toy is not deformed? If there is little moisture, the slime will dry out. It is necessary to save him, if in his "apartment" (container), pour a little water (5-7 drops). The slime will absorb moisture. This will help him recover.

If suddenly the toy has become watery, due to excess moisture, the use of ordinary table salt can help. Pour a few grains of salt into the container. Cover with a lid on top. In the air, the "house" is shaken.

In order for the slime to grow, a few drops of water are poured into the container overnight. Close the lid. Put on the shelf of the refrigerator. You can not store a toy in the freezer, otherwise the slime will be covered with frost.

When the toy has not been played for a long time, it may become moldy. If mold has been found, it is advisable to discard the slime.

Video: how to store Lizun