How to choose a terrarium for a tarantula. DIY terrarium Video: The idea of ​​​​creating a large terrarium

Plexiglas is the most suitable material for a terrarium

The most suitable and affordable materials for creating terrariums are silicate and organic glass.

Advantages of plexiglass:

• It is more difficult to break it than ordinary silicate;
• Containers made of plexiglass accumulate heat well and reluctantly give it to the surrounding space;
• Its fragments rarely form sharp edges that can be cut;
• Plexiglas is easier to process and fasten.

Plexiglas has fewer disadvantages than advantages, but each of them can become critical for a terrarium.

1. Plexiglas is easy to scratch. Therefore, it can only be washed with a soft sponge or gauze;
2. The surface of plexiglass becomes cloudy over time and begins to turn yellow;
3. UV rays are harmful to plexiglass.

Thus, plexiglass is a good material for terrariums, whose inhabitants cannot scratch the walls. It can be spiders, snakes, Achatina. For the manufacture of terrariums in which animals with sharp claws (lizards or turtles) will live, a different material should be chosen.

In addition to the plexiglass itself, you will need plastic corners and a metal mesh for ventilation. For the manufacture of doors, plastic profiles E of two types are needed. The top profile should be 2 times deeper than the bottom one. The size of both profiles corresponds to the thickness of the door material.

Choice of plexiglass

In order to choose the right plexiglass for a terrarium, you need to know that it comes in two types - cast and extrusion. Molding is more expensive, but it is devoid of most of the above disadvantages. It is stronger than extrusion, less cloudy. Some brands pass UV rays well and do not collapse under their influence. Therefore, it is worth choosing those brands of molded plexiglass that are characterized by strength, preservation of transparency and do not retain UV rays. The thickness of the sheet should not be less than 5 mm.

Adhesive selection

The glue must meet two characteristics:

1. Be harmless to living organisms, do not release chemicals in contact with bedding, water or excrement;
2. Be durable and waterproof.

In practice, these conditions are met by any silicone sealant for gluing terrariums or aquariums.

When working with such sealants, care must be taken, since drops frozen on the material are difficult to clean off.

Required Tools

To create a glass terrarium, you will need the most common tools.

• glass cutter;
• Fine-grained whetstone or sandpaper;
• Ruler;
• Glass marker;
• Sharp knife;
• Heavy rectangular object;
• Adhesive tape;
• Sharp scissors.

You also need to take at least two rags: one - in order to wipe the glass, the other - for other surfaces and hands.

Stages of making a terrarium

You should start making a terrarium with a drawing. On a piece of paper or using a computer program, you need to draw each of the sides of the parallelepiped, indicating the dimensions, as well as the general view when assembled, with side markings. Dimensions can be taken ready-made, recommended for keeping a future pet, or you can calculate it yourself, based on the standards of maintenance and the conditions of a particular apartment.

Then, using a ruler and a marker, draw out the details and cut them out. If there is to be a hole in the part, it is drilled before gluing begins. The edges of glass parts are treated with a grindstone or sandpaper. In order to avoid glass dust, this is done under running tap water. After that, the parts are dried and the gluing points are degreased with acetone.

Making the base

The parts are connected with glue. It is applied to the fat-free edges, after which the parts are pressed against each other and fixed. This is easiest to do with electrical tape and a heavy rectangular object.

Connecting terrarium parts

Excess glue is not washed off - it is carefully cut off after the parts have completely dried. The surfaces to be glued are not recommended to be pressed close to each other, between them there should be a layer of glue of 1–2 mm.

Thus, a box with a built-in ventilation fence is assembled and proceed to the manufacture of doors. To do this, a deep profile is glued to the ceiling from below.

Deep groove bonding

A small profile is applied to the upper part of the front corner of the ventilation fence.

Small profile bonding

Doors are inserted into the grooves of the profiles. The result is a structure like this.

Final design

Production of a ventilation fence

This design uses flow ventilation. The principle of operation is that air enters one hole and exits another, thus creating its constant current. It is very simple to arrange flow ventilation, and in terms of efficiency it is superior to ventilation through an open lid. But there are two points that must be observed.

1. The air inlet is at the bottom. The outlet should be 1.5–2 times larger and be on top. It is optimal to place it near a heat source;
2. Holes should not be placed so that they are opposite each other, otherwise the air current will create a draft that is harmful to most insects and reptiles. The most correct option is that the inlet is located on the side wall below, according to the ground level, and the outlet is located on the opposite wall at the very top.

Instead of one large one, you can make several small holes. Aluminum mesh is best suited for embedding them. Plastic and synthetic are fragile, iron rusts under the influence of moisture.

The ventilation can also be used to control humidity. To reduce humidity, it will be enough to increase the number or total density of ventilation holes, to increase - to reduce.

To create a ventilation fence, it is necessary to cut out two additional parts - a strip for the doors and a rectangular ventilation panel.

They are glued at the stage when the structure has only a bottom, back and side walls.

There are already two walls

Then glue the second wall. With the help of corners and glue, a metal mesh is attached to the upper parts of the ventilation parts.

Metal mesh installation

After that, proceed to the manufacture of the roof. Both parts are glued to the resulting frame, between which a mesh for the outlet is attached with the help of corners and glue.

Roof erection

The structure is left for a day to dry, then the edges of both holes are reinforced with glass strips.

Strengthening with glass strips

Making a terrarium cover

Often a terrarium is made without doors, but with a removable lid. The advantages of this design are that cartridges for heating lamps and fixtures for appliances, as well as fans for forced ventilation, are built into the cover.

Forced ventilation is used in large structures. Ventilation is carried out by means of two fans. The first contributes to the influx of fresh air from the outside, the second - mixes it inside the structure. Any brand that combines small size and low noise level is suitable for a terrarium, for example, cooling fans for system units.

Foamed PVC is a good material for the lid, other non-toxic plastics will also work..

The height of the lid is selected taking into account the equipment that will be attached from below, the length and width - to the dimensions of the terrarium with an increase in the thickness of the material. The parts are cut and glued in the same way as the glass parts of the terrarium. In the finished cover, holes are made for the wires and a hatch is cut out. After that, the lamps are built in. The wires must be carefully insulated, glue a piece of plastic to the cartridges so that there is a gap between the heating elements and the cover.

Features of the arrangement of terrariums depending on their purpose

For reptiles

Turtles are better suited to closed terrariums.

Turtles do not tolerate the microclimate of an average Russian apartment. Therefore, open terrariums are not suitable for them - it is difficult to maintain the necessary temperature and humidity in them. You can create good conditions for a turtle only in a closed terrarium.

The dimensions of the minimum terrarium for a turtle are calculated as follows. The length will be equal to the length of the turtle times 5, and the width will be the width of the turtle times the same value. Turtles do not need a large height, it is not advisable to make terrariums even for large individuals above 50 cm.

When choosing a material for the walls, it should be taken into account that turtles do not always adequately perceive transparent barriers and can beat against them for a long time. Therefore, opaque materials are preferred. To improve the inspection, the front wall can be made of glass. Plexiglas is not recommended as turtles can scratch it with their claws.

Turtles need very good ventilation, so the top one, through the lid, is not suitable. Need flow.

The temperature in the place where the turtle is kept should not fall below 22 C. Therefore, heating is mandatory. Thermal mats and similar devices for lower heating are not used, since heat flows coming from below can cause kidney disease. Heating must be top. To do this, you can use a conventional 60 W incandescent lamp or an ultraviolet lamp. Most of all, these reptiles like uneven heating, when half for wakefulness and eating is warmer, and half for sleeping is colder, so the lamps are placed near one of the walls.

The choice of a terrarium for a lizard depends on its species.

The shape of the terrarium for lizards is chosen depending on their species. Woody ones need a vertical terrarium in which the height will be at least twice the width, ground ones - on the contrary.

For small lizards, especially those who like to climb, one of the side walls can be made of metal mesh. The diameter of the cells should be such that the reptile could not get out, but freely cling to its paws. From the same grid, you can make a cover. Such designs are suitable for keeping reptiles, the optimum temperature for which is not too different from room temperature.

However, mesh walls are not suitable for keeping iguanas and chameleons. The room air is too dry and cold for them. In order to maintain the microclimate necessary for these reptiles, the walls are made of plywood, organic or silicate glass.

Keep iguanas in horizontal terrariums. For one adult reptile over one and a half years old, the dimensions should be as follows: 200x200x125 cm. When kept in smaller rooms, iguanas lose their appetite, move little and lose resistance to diseases.

Small terrariums are also not suitable for keeping agamas, the minimum volume for keeping an adult is 200 liters. A built-in UV lamp is required. Stones with a heating element inside are not suitable for heating; you need to take a lamp for a terrarium or an ordinary incandescent lamp. Agamas do not like humidity and cold, so you need to equip the terrarium with a thermometer and a hygrometer.

Terrariums for insects

For spiders and snails, horizontal terrariums without doors, but with removable covers, are suitable.

The tarantula does not need a lot of space

Tarantulas are capricious in keeping, any deviations from the required humidity and temperature in the terrarium can cause their diseases. They do not tolerate drafts or stagnant air. Therefore, it is best to equip the terrarium with a heater with automatic temperature control and a hygrometer.

Tarantulas do not need large volumes; in nature, they spend their whole lives in shelters. The minimum bottom area is equal to the spider's leg span multiplied by 2.

Achatina needs a dwelling with a large bottom area

For Achatina, rectangular terrariums with a large bottom area are needed. These snails do not need a large supply of oxygen. For ventilation, a flow system is used, the places of air entry and exit are rows of holes with a diameter of 3–4 mm.

Features of manufacturing a decorative terrarium

Either a teapot or a terrarium

Terrariums serve not only to keep reptiles and insects. Decorative terrariums can contain only plants and decorative elements. For their manufacture, they take any glass container, preference is given to non-standard items. The video explains how to make a mini terrarium with light from an incandescent lamp.

Video: Do-it-yourself light bulb terrarium

As can be seen from the article, making a terrarium with your own hands is simple, and even a person who does not have such experience can handle it.

Small ones can be kept in glass jars or small boxes, while large individuals can be kept in glass and plastic terrariums. The bottom of the tank must be covered with peat, moss and wood dust. As shelters for pets, snags, pots or unpretentious plants can be placed in the terrarium.

Cacti, objects with sharp edges and ribbed stones should not be placed in the terrarium.

The storage container must be tightly closed with a lid, which has holes for air to enter. The temperature inside should be kept within 25-27 degrees. You can control it in the terrarium with a thermostat. Lowering the temperature is especially dangerous for well-fed spiders - putrefactive processes can occur in the stomach.

To maintain the required level of humidity in the container, it is necessary to put a saucer with water, a container with moistened moss or bedding, which must be sprayed every day with a spray bottle. Lack of moisture can lead to problems with molting, and those originating from the tropics can die altogether. However, waterlogging of the air should not be allowed either - the appearance of mold fungi and bacteria can cause disease of the integument of the body and respiratory organs of the animal.

Additional lighting in the terrarium is not required. For heating, a fluorescent lamp or a biolamp is suitable.

Most spiders in nature are nocturnal, so you should not put the terrarium in direct sunlight.

Feeding

Food for spiders can be bought at the bird market or pet stores. Young, often molting individuals are fed twice a week with young crickets and mealworms. The diet of adult spiders consists of flies, cockroaches, crickets, frogs, mice and locusts. The food insect or animal should not be larger than a third of the size of the spider itself. Large spiders can be given a small mouse or several large cockroaches and crickets once every 10 days.

Uneaten insects (even if alive) must be immediately removed from the terrarium so that they do not damage the integument of the spider's body.

Before molting, spiders may refuse food for a period of three weeks to two months. In this case, it is important to provide pets with access to fresh water. The drinking bowl, which is a simple lid from a jar, needs to be filled daily with boiled or settled water. To prevent the animal from overturning the drinker, you can put a smooth pebble in it.

Learn how to properly organize a terrarium for animals, what plants to arrange, how to make a terrarium for plants.

How to make and arrange a terrarium for a red-eared, land turtle: drawings, description, photo

Exotic animals are quite suitable for keeping at home. However, for their full existence, it is necessary to create suitable conditions. For this purpose, terrariums are equipped.

Important: To keep pets in a terrarium, it is necessary to recreate an ecosystem similar to the living conditions of animals in natural conditions.

We will tell you what requirements a terrarium must meet for keeping various animals. Let's start with the turtle. At home, you can keep land, as well as freshwater (these include red-eared) turtles.

The most important mistake is keeping these animals on the floor of an apartment or house. You can organize a ground terrarium, it must have suitable characteristics. However, it is unacceptable to let the turtle roam the apartment, it is harmful to the pet.

Land turtles there are many types. For home keeping, in most cases, medium-sized turtles of about 20 cm are chosen. You can make a terrarium for a turtle yourself, what you need for this:

• Purchase and glue glass;
• Organize ventilation;
• Hold UV Lamp;
• Pick up soil.

A terrarium with a minimum size of 60 x 40 x 40 cm is required for a small turtle of about 12 cm. But it is important to make sure that there is enough space if the turtle grows. If there are several turtles, respectively, the dimensions should be twice as large.

The terrarium of land turtles should not be cluttered with various kinds of obstacles that will interfere with movement. The following soil should be laid at the bottom:

• A mixture of sand and clay;
• Hay;
• wood chips;
• Large pebble.

Terrarium for tortoise

For red-eared turtles, the size of which is within 18-30 cm, a terrarium of 150-200 liters is required. Water should occupy 3⁄4, and land - 1⁄4.

Important: For red-eared turtles, it is necessary to organize a sloping bank with no scratchy texture. The water must be at least 20°C.

Terrariums for turtles should be well ventilated. For this, two holes are made:

• The first is large, located on top of the terrarium;
• The second is small, on the front wall of the terrarium at the base of the soil.

Air temperature is a very important factor that should be properly organized in a terrarium. The turtle terrarium is equipped with a 60 W incandescent lamp, which is installed from above. Bottom heating is not recommended, as it is harmful to the animal's kidneys. The lamp should heat one corner more strongly, here the turtle will warm up and eat food (temperature is about 28 ° C). In a cooler corner (about 24 ° C) a house is installed.

Aquaterrarium for red-eared turtles

Turtle terrarium organization scheme

Video: Aquaterrarium for turtles with their own hands

How to make and decorate a plexiglass terrarium for a lizard, gecko, agama, iguana, chameleon, snake, snake?

The lizard suborder includes all scaly creatures except snakes. This includes:

• iguanas;
• Chameleons;
• Geckos;
• Agamas.

Snakes are descendants of lizards and stand out in a separate suborder. Many have various lizards as pets. Many also keep snakes at home. To keep these pets, it is necessary to have a suitable terrarium according to the conditions. There are a lot of varieties of lizards, snakes. Some of them live in trees, others live in the ground. Therefore, before you get a certain type of pet, be sure to familiarize yourself with the conditions suitable for a particular pet.

Terrariums for scaly are of the following configuration:

1. Horizontal- for reptiles leading an amphibious lifestyle (snakes, snakes).
2. vertical- for tree lizards and reptiles living in mountainous areas (chameleon, iguana).
3. cubic- for those living in the thickness of the earth, in holes (gecko, typical lizards).

For the manufacture of terrariums with their own hands, ordinary or organic glass is used. Ordinary glass is inferior in its characteristics to organic glass, as it is more fragile. For large animals, it is recommended to make terrariums with a frame made of wood or metal. Plexiglas sheets are glued together with silicone adhesive.

The terrarium for reptiles must be equipped with UV lamps, ventilation, and must be covered with a lid so that the animal does not escape. Thermal mats are used as heating, they are placed under the ground.

For chameleons, iguanas need to organize a tropical terrarium. There is little space for water. But you need branches for climbing. The presence of rough surfaces is welcome, it provides an additional possibility of climbing.

Terrarium for a chameleon

For typical lizards, climbing branches are also required. If the lizard likes to dig into the soil, the sand should be at least 10 cm thick.

For the agama, a desert terrarium should be organized. The soil is calcium sand. The temperature must be maintained within 30°C. To adjust, install a thermometer. In a desert terrarium, a small container of water must be placed.

Desert terrarium for agama, lizards

Aquaterrarium for snakes, snakes must be equipped with water and land. On land, a shelter is required. These animals are demanding on water, its temperature should always be within 20 ° C.

The presence of plants in the terrarium is mandatory. It is not only decoration, but also a source of food and oxygen. For exotic animals, such plants are suitable:

• Fern
• Ficus tiny

In terrariums for snakes, lizards should be high humidity.

Video: Do-it-yourself terrarium for lizards

How to make and design a terrarium for Achatina snails?

Achatina snails are large molluscs. It is easy to keep them, because these snails are undemanding to conditions. Even with the temporary absence of the owner, they can feel good if taken care of in advance.

The terrarium for Achatina snails can be made of ordinary or plexiglass, you can also use a plastic container. The "house" for snails should have small holes for ventilation. Be sure to be of such a size that the snail does not escape.

Important: Achatina snails need space for a comfortable existence. For one snail, a 3 liter container is suitable; for two snails - 5 l.

Container equipment requirements:

1. Cover the bottom with a flower substrate without fertilizers, snails like to burrow into the soil. Sand, walnut shell, coconut are suitable as a substrate. The poor layer is clay and tree bark.
2. The soil should always be moist, but not waterlogged. The soil is sprayed with a spray bottle daily.
3. It is not necessary to install lighting lamps for snails. They are suitable for soft diffused daylight. During the day, snails hide in the substrate, and are awake at night.
4. The air temperature in the container should be around 24°C.

To hide Achatina snails, fragments of flower pots, coconut shells, and stones are placed inside the container. Also, live plants are planted in the substrate: moss, ivy, fern, lettuce, cereals, etc.

Terrarium for Achatina snails: top view

How to make and arrange a terrarium for a tarantula, ants, Madagascar cockroaches, praying mantis?

Terrariums for insects must also have a number of certain characteristics. If everything is done correctly, the life of insects will be comfortable and safe.

Consider how to equip terrariums for various insects.

Terrarium for tarantula:

1. Keeping a tarantula at home requires a spacious terrarium. There should not be objects with a high height inside so that the tarantula does not fall.
2. Provide cover. For this, fragments of bark, flower pots and other similar devices are suitable.
3. It is not recommended to place stones in the terrarium of the tarantula, as the insect may be injured.
4. The size of the terrarium is calculated as follows: the length of the spider's legs is multiplied by two. For example, the length of the legs of an adult spider is 14 cm.
5. In this case, the size of the “house” should be 30 × 30 × 20 cm. At the same time, 20 cm is a safe height for a tarantula.
6. Be sure to make ventilation holes on the sides and top.
7. The bottom is covered with soil, branches are placed for tree spiders.

Terrarium for tarantula

Mantis terrarium:

1. A vertical terrarium is suitable for a praying mantis.
2. Fill the bottom with soil, and put a layer of foliage on top. If the foliage is large, additional shelter is not required.
3. Humidity should not be too high, spraying is recommended infrequently.
4. The temperature in the terrarium is 25°C.
5. The terrarium should not be placed in direct sunlight.
6. Ventilation is required.

Mantis content

Terrarium for ants:

1. Keeping unusual pets requires a narrow flat container.
2. Sometimes 2 cans are used to maintain an ant farm, so that one enters the other. Both banks are closed with lids. An ant family is located in the space between the banks.
3. The terrarium for ants is called a formicarium. Sand or a special gel containing additives for ants is poured inside.
4. Some collect ants in the forest, and collect soil there.

Formicarium

Terrarium for Madagascar cockroaches:

1. If the terrarium for Madagascar cockroaches is not equipped with a lid, then grease its walls with petroleum jelly so that the insects do not escape. It is better to cover the dwelling of Madagascar cockroaches with a lid with holes.
2. There must be plenty of hiding places inside. To do this, use egg trays, cockroaches love them for the presence of cells, toilet paper sleeves, potted fragments, wood.
3. The flooring should be of fragrant wood with sand. Wood preferably coniferous, periodically change it.

Keeping Madagascar cockroaches

How to make and arrange a terrarium for rodents, a hamster?

In most cases, rodents, including hamsters, are kept in cages. Also, rodents can be kept in terrariums, providing air access.

Terrariums for hamsters can be made of plastic. They have a number of advantages over the cell:

• Firstly, sawdust does not fall out of the terrariums;
• Secondly, at night you can’t hear how the hamster gnaws on the bars of the cage.

A hamster can be kept in a terrarium of different sizes, the size of the pet should be taken into account. In the presence of an equipped "dwelling" the pet will feel quite comfortable.

How to arrange a terrarium for a hamster:

1. Cover the bottom with sawdust or hay;
2. Put a drum or wheel, feeder, drinker;
3. It is also necessary to have dry twigs and sticks, the hamster will sharpen his teeth.

Comfortable hamster house

What helps keep the humidity in the terrarium?

Keeping many exotic pets requires a certain level of humidity in the terrarium. For some animals, high humidity is indicated, for others, humidity is contraindicated. For example, hamsters will feel great in dry sawdust, Achatina snails need a wet extract, praying mantises will not be able to survive if there are drops from condensate in the terrarium.

Important: The easiest way to maintain humidity in a terrarium is to spray the soil with water from a spray bottle.

The required soil moisture for pets is different:

1. Humidity for Achatina snails is checked in this way - squeeze a handful of soil in your hand, if water drips, then the soil is waterlogged. Achatina snails react negatively to high humidity: they hibernate, become lethargic, and lose their appetite.
2. Moisture is also important for ants. You can determine the level of sufficient moisture in formicaria as follows: if perspiration appears on the walls, spraying is stopped.
3. The soil in the mantis terrarium should be sprayed sparingly. It should be slightly damp. How often this should be done is difficult to say for sure, it depends on the air circulation in the terrarium.
4. The optimal humidity level for the tarantula spider is 35-60%.

You can determine the exact humidity of the air using hygrometer.

Hygrometer determines the level of humidity in the terrarium

How to make a temperature of 33 degrees in a terrarium?

Important: Temperature is one of the most important requirements for maintaining the microclimate in a terrarium.

Terrarium animals are very sensitive to temperature changes. All animals have their own biological needs for thermoregulation.

Various devices are used to maintain the temperature:

• heating lamps;
• Heated mats;
• Ceramic heaters;
• infrared lamps.
• Heating thermal cords.

Warm areas are made for scaly ones. In these "sunny areas" pets periodically bask. Then they crawl away to places with a lower temperature. Heat lamps are suitable for this. They should be placed in such a way that the pet does not get burned from touching.

For snakes, heating mats are used under the ground, turtles are heated from above. To heat the snails use a heating pad, rugs.

A budget way of heating is to place a terrarium near heating batteries, heaters. But this method has a number of disadvantages that can affect the normal life cycle of animals. Still, it is better to use special devices for heating terrariums.

Important: You can and should monitor the temperature in the terrarium using a thermometer.

How to make and decorate a large aquarium terrarium for plants and flowers?

The terrarium is not only a "house" for your favorite pets. Plants can be grown in a terrarium. Terrariums with plants have many advantages:

1. They are unpretentious in care.
2. This is a luxurious element of the interior.
3. Suitable for people with a minimum of free time and a desire to have indoor plants at home.
4. Good alternative to flower pots.

Aquariums are a suitable base for terrariums. But before you fill it with soil and plants, you need to understand which plants are suitable for terrariums:

• Plants that prefer or tolerate shade easily.
• Dwarf plants. It is important that the plant does not outgrow the walls of the terrarium, otherwise the appearance will suffer over time.
• Plants that love moisture.

Plants that are most often grown in a terrarium are moss, cacti, succulents.

If you decide to make a terrarium with plants out of an aquarium, take into account that the aquarium with soil will become very heavy. Therefore, do not place it on fragile tables. Also, you can not place such terrariums under the air conditioner or in close proximity to heating devices.

Think in advance how lighting will be observed. Direct sunlight is contraindicated in a terrarium, but darkness is also unacceptable. Optimum lighting is indirect diffused light. You can use special garden lamps.

Large terrarium for plants

Important: If you decide to use an old aquarium, wash it thoroughly with antibacterial agents or soap. Residues of dirt and bacteria can subsequently harm plants.

For arranging a terrarium, in addition to plants, buy a soil mixture with drainage. It is desirable that marsh moss or sphagnum additives be present in the soil. You will also need pebbles (gravel), moss, all kinds of decorations, as well as gloves.

The following layers are laid in the aquarium:

1. Pebble or gravel. You can add a handful of activated charcoal, this will serve as additional drainage.
2. Moss. A layer of moss will prevent subsidence of the soil and will retain moisture.
3. Priming. The layer of soil should be thick enough to fit the roots of the plants. Also, the thickness of the soil depends on the height of the aquarium.
4. Plants. Plant the plants in the holes. Water the plants.

At the end, you can add decorative elements that will not suffer from excessive moisture. It can be any items: shells, figurines, coins. On this, the organization of the terrarium for plants is ready.

Video: The idea of ​​​​creating a large terrarium

How to make and decorate a terrarium with your own hands from a jar, bottle, plastic

The plant terrarium is called the florarium. You can grow plants in a bottle or jar. Such a flower arrangement takes up very little space, but looks impressive.

Growing plants in a jar or bottle is similar to growing plants in greenhouses. The presence of the walls of the container allows you to maintain the necessary microclimate of the florarium. Banks with plants are closed with lids or leave a small hole.

The disadvantage of growing plants in a jar is the complexity of care. Cleaning the florarium, getting rid of dead plants can be quite troublesome. But, nevertheless, this does not stop connoisseurs of florariums.

For the florarium, you can use both glass bottles and plastic ones. Plastic containers are inferior to glass ones in terms of their characteristics and appearance. The container does not have to be in the form of a jar. These can be vases, serving caps, large glasses, etc.

Important: Do not grow plants that are incompatible with each other. For example, succulents and ferns. These plants are opposite in terms of watering requirements, so there is a risk that the florarium will deteriorate.

In addition to evergreen exotic plants, you can grow a single flowering plant in a jar. Recently, it is fashionable to give such flower arrangements. The advantage of such a gift is its durability. You can, of course, give a flower in a pot, but the florarium looks more impressive and stylish.

Florariums are used to decorate home and office interiors. A row or series of florariums looks original.
The process of planting plants in a jar or bottle is essentially the same as planting plants in an aquarium. However, planting plants in a container with a narrow neck is painstaking work.

How to plant plants in a bottle or jar:

• First, layers are poured in the same order as in the aquarium: pebbles, moss, soil.
• Make indentations with a narrow long stick.
• Carefully remove the plants, along with the roots, from the pots in which they were sold.
• Place the plants in the holes with two long sticks.

Caring for the terrarium is easy: just water the plants as the soil dries out, and also wipe the dust from the jar inside and out. If there are no problems with wiping the dust from the outside, then many may be puzzled - how to wipe the dust inside the terrarium? It's easy: you can wrap a piece of soft sponge on a flexible wire, which will simply cope with pollution. A soft-bristled toothbrush will also work if it fits the size of your terrarium.

florarium

How to make and decorate an eternal mini-terrarium from a light bulb?

Light bulb terrariums look original and stylish. For the manufacture of such a terrarium, the most ordinary light bulbs of different sizes are suitable. To begin with, we recommend trying to work with a light bulb of the largest size.

You will need:

• Large light bulb;
• Screwdriver;
• round nose pliers;
• Scissors;
• Long tweezers.

Be sure to protect your eyes with goggles, as pieces of glass may fly off during operation.

Step by step manufacturing:

1. Remove the metal seal on the base of the light bulb.
2. Then, with a screwdriver, very carefully break the internal parts of the light bulb.
3. Using long tweezers, remove the "insides".
4. Work the hole well with a screwdriver so that there are no sharp edges.
5. For the stability of the light bulb, make the legs by dropping 2-4 drops of silicone glue.
6. Now pour sand, dry moss through the funnel, place the plants with long tweezers.
7. As a decor, you can use small pebbles and plastic figures.
8. A mini terrarium made of a light bulb can be placed on a stand. This will make it even more effective.

Mini terrarium in a light bulb

Ideas for hanging and table terrariums: photo

Below you will find ideas for plant terrariums in various configurations and with different plants. Get inspired to create beautiful and unusual home decorations with your own hands.

A small terrarium in a glass jar is perfect for decorating your desktop.

desktop terrarium

Hanging terrariums of different sizes are convenient.

Hanging terrariums

Even teapots can be used, the main thing is to apply imagination.

terrarium idea

Making a terrarium for plants or animals is not difficult if you approach this issue with inspiration and the desire to create a useful and beautiful thing.

Video: How to make a terrarium for plants?

After reading this article, you will know how to choose a terrarium for a tarantula what size it should be and what is the difference between a terrarium for terrestrial spider species and a terrarium for arboreal species.

Choosing a terrarium for your tarantula is very important. The well-being of your pet and how many years he will live will directly depend on this choice. If we talk about juvenile tarantulas, they are sold in a wasabi gravy boat. As a rule, such spiders rarely exceed a length of one to one and a half centimeters. I recommend transplanting such spiders immediately, at least from a salad bowl of at least 10x6x5 centimeters. In such a container, the spider will be able to molt twice. I do not recommend planting small tarantulas immediately in large terrariums, because this will greatly complicate the feeding of the spider and it will simply be difficult for him to keep up with prey. As the spider grows, it will be possible to increase the size of the container.

Before planting a young tarantula, sprinkle at least 1 centimeter of coconut flakes on the bottom of a salad bowl and slightly moisten it. You can also put a small shelter so that the spider is not scared. In the lid, it is necessary to make about 10 small holes with a diameter of about 2 millimeters. This is done in order to ensure good ventilation and so that the air does not stagnate.

Be careful! Little tarantulas are very nimble! Be careful that your pet does not run away. My little spider has tried to get away from me twice already.

When he runs away, just give him your hand and let him run into it. Don't be afraid, he won't bite you. Just do not make sudden movements so that the spider does not fall and get hurt.

After the spider grows up, it can be transplanted into a large container. Dimensions terrarium for an adult tarantula should be 40x40x40 for terrestrial spiders and 40x40x60 for wood.

Such terrariums are made of glass or plexiglass, have front doors and ventilation on the floor, top and sides. Such terrariums cost about 600 rubles. You can also make your own terrarium. The most important thing is the dimensions of at least 40x40x40 and good ventilation.

If your spider is a terrestrial or burrowing spider, then it definitely needs to pour at least five centimeters of coconut flakes on the bottom. I also recommend putting a few pieces of bark. This is done so that the spider has the opportunity to dig a mink for itself. It will not be superfluous to put a shelter in the terrarium. In my opinion, a very good shelter is half a coconut shell.

If your spider belongs to the species that live in trees and shrubs, then he needs to equip the terrarium a little differently. First of all, the terrarium should be high. About 60 centimeters in height. The bottom area in the terrarium is not so important for these types of spiders. Next, you need to pour about three centimeters of coconut flakes, and place the branches in the terrarium. Tree species of spiders weave an aerial web just on such branches. These species are more demanding on the humidity in the terrarium, so it should always be maintained at 80 percent.

It is very interesting to watch the hunting of such spiders. They can catch prey on the fly. And besides, they are very good at jumping. It is worth considering this fact and knowing this feature before starting such a spider. By nature, arboreal species are much better than burrows and in most cases are shy, but few can compare with them in beauty.

Very beautiful spiders of the genus Avicularia, besides, even a beginner can keep them. It is only important to monitor the humidity.

Today I want to tell you how to make a terrarium for a spider, scorpion or any other terrarium inhabitant from a plastic laundry container that is sold in a hardware store and is relatively inexpensive. My container with dimensions 35x20x20 length, width and height cost 290 rubles.

To begin with, let's ask ourselves the question: “What is the difference between plastic terrariums sold in pet stores and laundry containers sold in hardware stores?” And the answer is simple: in the "terrariums" from pet stores there is ventilation, and a convenient carrying handle, that's all. In the case of my container, there is no handle, but I don't really need it.

How to make ventilation in a terrarium from a plastic container:

The first step, and the only one in our case, will be the manufacture of ventilation holes in the container, it is worth noting that ventilation is very important for any terrarium inhabitants. In my case, I'm making an insectarium for Madagascar cockroaches, so I'll do ventilation on the side and on the lid, so that the air circulates better.

In order to cut holes for ventilation, I use a knife heated on a gas stove, it cuts plastic perfectly without breaking it. I note that with this method of cutting, unpleasant smoke is emitted, so it is better to open the window first.

I make two holes: on the side, and on the top cover of the future insectarium for cockroaches.

In order for the cockroaches not to scatter, these holes must be sealed with some kind of mesh, for this I use a simple mosquito net, with a rather small cell.

I cut out suitable pieces of mesh and glue them on with shoe glue. There was no other glue at hand, it doesn’t look very nice, but I’m not chasing after that.

In this short and simple article, I told you how to make a terrarium with your own hands, which will compare favorably in price with terrariums sold in pet stores.

You can ask all questions below, or in our VKontakte group.

                                     © 2014-2018 website                                       :