Print a gun out of paper. Dragunov sniper rifle (SVD). paper model. We glue the gun out of paper

The popularity of origami does not want to deny at all. Almost anyone can learn how to make paper crafts. And, probably, there is no such person who has not folded a paper boat or airplane at least once. All these simple models can be attributed to the first steps in mastering the art of origami.

Those who are fond of such things, most likely, have repeatedly asked themselves the question: "How to make weapons and more complex fakes out of paper?" After all, such a souvenir can be made right in front of a child, and then together they can do the most interesting transformation of a completely flat sheet of paper into three-dimensional forms.

The simplest pistol

It is believed that various fakes, or rather their manufacture, are great for spending time with children. The child will develop motor skills and imagination. It also promotes mindfulness and perseverance.

For a boy, it is quite possible to perform a simple origami for the first time. Paper weapons, such as a pistol, are made from two parts.

To do this, you need to bend a rectangular sheet in half. Its right and left sides fold inwards. The procedure for bending the sides is repeated two more times. Then the same actions are performed with a square-shaped sheet.

After that, the handle of the weapon is made from the first element. The form is folded in half, unfolded and divided into three parts. The right part bends down 90°, the same happens with the left element. The components of the parts are put together and the result is a handle.

The trunk itself is a former square sheet of paper. It connects to the handle, and the origami "Weapon" made of paper is ready.

Sophisticated paper gun that can shoot

Origami "Pistol" is a great entertainment and at the same time relaxation. The lesson itself is available to everyone, anywhere and super economical. They can occupy themselves or a child, for example, in line with a doctor.

To do this, you need paper and nail scissors. As for the paper itself, it is better to use cardboard. It is more durable and will not deform so quickly. But, in principle, any paper is suitable for origami.

And yet how to make a weapon out of paper? This problem can be solved by reading the step-by-step instructions.

The process of making origami "Weapon"

First, an A4 sheet is folded along the length several times. This is the trunk of the future product. Then the pistol grip is made in the same way. It should be a little wider.

Both parts are smoothed out, and the smaller element is superimposed on the larger one. The bottom blank is divided in half visually. Alternately, the right and left sides are bent towards the center of the product. After that, the part is folded to the center again.

A small hole is made with scissors at the base of the parts. The new paper sheet turns to itself with the short side and folds to its middle. The resulting detail is the trigger. The part of the sheet that is not involved is cut off. The element itself is folded in half and pushed into the clearance, which is made at the handle.

The halves of a thin blank are threaded into the pockets that have formed at the wide part. The edges are bent with care so that the corners are even. If necessary, the excess is cut off at the trigger.

Then another sheet of paper is taken. Its width is the width of the handle. The last edge of the paper weapon model is folded inward. It can be glued with tape to get a more even and beautiful pistol grip.

Finally, the last sheet is taken, and the same actions are performed with it as with the trigger. The first edge of the manufactured part is folded to the left so that the corner remains outside. This corner is cut off. The blank is threaded into the back of the muzzle - and the gun is ready.

In order for the weapon to be fired, an elastic band for money is put on the muzzle and paper bullets are made.

Real ninja weapons

The art of origami makes it possible to make not only flowers, boats and airplanes out of paper. From it you can make various types of weapons, such as the "ninja star".

Shuriken is a type of throwing weapon. Used by legendary ninjas. By the way, they were quite seriously carried away by mysticism and therefore applied various mysterious signs and hieroglyphs to their weapons. All this helped them in battles. Ancient hieroglyphs can also be depicted on this paper weapon. Then certainly the child will not remain indifferent.

Scheme and assembly process

For work, only one sheet is needed to make a weapon out of paper. Its scheme is needed for a better and more understandable assembly.

The paper is folded in half. Along the line where it is folded, it is cut into two strips. Each piece is bent along. Then, following the origami scheme, corners are made for the elements.

The result is two mirror components. The left one flips over to the other side and overlaps the right one. Then the triangular shapes of the lower part are slipped under the central edges of the upper elements.

The figure is flipped. The same actions are performed with the remaining seven corners. After these steps, the question of how to make weapons out of paper can be considered closed. After all, shuriken is also a weapon with a very interesting and long history.

Samurai knife

In addition to weapons for shooting, you can make a samurai knife. Kunai is an instrument originally from Japan. In its shape, it is somewhat similar to a fish. Quite widely used in the economy. But if the need arose, it was used as a formidable throwing weapon.

The creation of this craft comes from ordinary paper, and if everything is done carefully and accurately, then the question of how to make weapons from paper will definitely not arise.

The process of creating an original knife

First, two elements are folded out of paper. Excess ends can be removed with scissors. Stationery allows you to make a cut more accurately for a product such as a weapon made of paper. The diagram will help not to get confused during the assembly process.

A square sheet is folded diagonally. The resulting triangle folds in half. The figure unfolds to its original position. After that, each of the corners is wrapped so that the edge can coincide with the fold line at the center.

The part is folded in half along the central fold strip. The ends of the paper are tucked into the pocket on one side of the folded item. This is the edge of a knife.

After the part is completed, the handle is made. To do this, fold a sheet of paper diagonally, then make a flattened tube out of it. Then it connects to the "blade" itself. The corners fold towards the center and are secured with tape for a stronger connection.

At the end, the final touch is made: a round ring on the knife handle. It is attached and the origami toy can be used.

Children can also be involved in the work, so that later, if they want to make such a product, they do not have a question about how to make weapons out of paper. And if desired, the child can always do crafts on their own or with friends.

Origami as a small accomplishment in art

Each, even the simplest model, is a small achievement in mastering the art of paper origami. Schemes (weapons, for example) are used for more visual implementation of various models.

To engage in this type of creativity, it is not at all necessary to spend large sums of money, because only paper is enough. At the very beginning, this may seem something unrealistic and very difficult. But in fact, the lesson is very exciting, and if you use certain patterns and rules, origami will turn, perhaps, into a favorite hobby for the whole family.

Today you will know as do set weapons from paper. As a material, of course, we need, and as tools - scissors, adhesive tape or glue. In addition to the above, of course, we will need the ability to accurately work with paper, as well as patience.

Making paper weapons

Before you start make weapons out of paper, read the instructions carefully.

Making a paper gun

For you will need two strips of paper of different lengths.

Scheme of folding a paper gun

1. Fold the strips along the long side several times to get long tubes.
2. Fold the blanks in half.
3. For a short workpiece, lower the ends inward.
4. Insert the long workpiece into the loop of the short one.
5. The gun is ready.

Making a paper revolver

To make a revolver, we need four rectangular paper sheets of different sizes.

Scheme of folding a paper revolver

1. Fold the larger rectangle several times along the long side to get a tube.
2. Fold the blanks in half.
3. Unscrew the ends of the workpiece at an angle outward.
4. The base is ready.
5. Fold the middle rectangle several times along the long side to get a tube.
6. There was a blank "drum".
7. Wrap the base of the revolver with the blank from step 6.
8. Wrap the ends of the workpiece remaining in front back and insert them into the slots for fastening.
9. Roll two small rectangles into a tube.
10. Insert the "muzzle" into the base blank.
11. The revolver is ready.

Making a paper gun

To complete the model, you will need two paper strips of different lengths.

Model for your collection.
CAR-15 (Colt Automatic Rifle-15) - Adopted under the designation XM-177E1 Commando. Since the beginning of the 60s, Colt's Manufacturing Company has been actively offering the Colt AR-15 rifle for adoption by the American army. In the middle of 1964, a whole range of different variants was developed on its basis, the most interesting of which was a short carbine.

Model for your collection.
FN SCAR - A weapon system developed by the American division of the Belgian company FN Herstal to participate in a competition to create a new assault rifle for US SOCOM fighters in 2003.
In December 2004, this system was declared the winner of the competition, and at the moment the rifles are being used by the US Rangers.
Print on a printer, on A4 sheets of matte thick paper, cut and glue.

Model for your collection.
One of the reasons why the Mauser pistol became popular among revolutionaries, whites and bandits during the Civil War was its enormous power at that time.

Model for your collection.
AK and its modifications are the most common small arms in the world. According to available estimates, up to 1/5 of all small arms on Earth belong to this type (including licensed and unlicensed copies, as well as third-party developments based on AK). According to many experts, it is the benchmark for reliability and ease of maintenance.
Print on a printer, on A4 sheets of matte thick paper, cut and glue.

Model for your collection.
The M40 is an American sniper rifle based on the Remington 40XB (in turn, an improved version of the Remington 700).
Print on a printer, on A4 sheets of matte thick paper, cut and glue.

Sometimes each of us wants to return to childhood and remember our favorite toys. So almost any man will be interested in succumbing to childhood memories and making a gun out of paper for his son or grandson.

Which method is to be preferred? Origami comes to the rescue - the ancient Japanese art of folding paper figures, to which you can involve all family members.

It has been proven that joint origami classes with children can bring a lot of positive emotions and new experiences for all participants in this creative process.

Scheme of the simplest origami paper gun

The easiest way to fold a gun looks like this:

What will be required?

You will need two rectangular sheets of paper and a little patience.

Step-by-step instruction

1. We fold both sheets into two strips like an accordion, only wrapping the paper in one direction (without turning the workpiece over). In this case, it is desirable that one strip turn out to be slightly narrower in width than the other (as in the summary diagram above).

1. We fold each resulting paper strip in half.

1. We make an impromptu loop from a wider blank, which we put on a narrower strip, as shown in the master pistol manufacturing diagram (steps 3 and 4).

The toy gun is ready!

Optionally, you can make and glue a sight to it by taking a small strip of paper and folding it as shown in the picture:

How to make another version of this gun out of paper (which also knows how to shoot!) You will learn by watching the following video:

Origami paper gun and revolver

Based on this basic scheme, you can easily and simply make a paper gun without adhesive tape and glue:

And a little confused and showing a bit of imagination to build a toy paper revolver with your own hands:

Easy shooting pistol

Another simple paper gun that shoots bullets can be done using the following instructions:

What will be required?

For work you will need:

• paper,
• pencil and black pen
• scissors,
• gum for money.

Manufacturing scheme

We perform the following steps step by step:

1. We draw the contours of the future weapon on paper. To do this, you need to bend an A4 sheet of format in half and draw the contours of a gun on one part of the sheet (steps a-b in the main diagram).

1. Carefully cut out the gun along the contour and lay out the sheet: a mirror image of the gun is obtained.

1. Now you need to draw the missing part on it with a black pen so that the layout looks like a real gun.
2. We make a bend for bullets. The upper part of the gun barrel is easily pressed inward (step c) to make a small groove where homemade bullets can be inserted.

1. We adapt the rubber band for shooting. At the beginning of the trunk, we make a small incision (step d) and put an elastic band into it. We pull and fix it on the opposite part of the barrel so that when released, it can capture the bullet.
2. We make a bullet. We crush a ball from paper (you can have several at once) and insert it into the groove made.

Job done, gun ready!

A master class on making another variety of a simple paper gun, this time a mini-format, which is also very, very easy to repeat, can be found in the following video clip:

Volumetric model of a paper gun

Consider another realistic version of a 3D paper gun. Its manufacture is somewhat more complicated than the previous ones and takes a little more time. However, we assure you, the result is worth it!

materials

We will need:

• sheets of A4 paper,
• scissors,
• tape or glue.

Scheme of work

1. Pistol frame.

Take a sheet of A4 paper and fold it in half several times. It turned out a narrow strip that needs to be fastened with adhesive tape so that it retains its appearance and does not unwind.

One edge of the strip must be bent to the middle, the second also. Both resulting edges should be the same height. The result was a kind of groove with even, identical edges - the frame of the future pistol.

1. Lever.

We repeat the same steps again, only fold the sheet in half lengthwise and make a tube of paper, 4 cm in diameter. We fasten the paper handle with tape, make an oblique cut.

We connect the frame of the gun to the handle and fix it with glue or tape.

1. Small parts.

To the back of the handle with the frame, you need to carefully attach a paper strip, the same width as the frame. One side of the strip is fixed with adhesive tape to the handle, the other to the frame.

This strip smoothly connected two parts into one. Now, in order for the paper gun to look like a real weapon, you need to cut out a piece of paper and glue this area, as shown in the figure.

We make a safety bracket from a strip of paper, fix one end of it with tape under the bottom of the frame, and the other on the front of the handle.

1. Pistol barrel.

We tightly twist the paper into a tube, 1 cm in diameter and a length equal to the length of the frame. Then we cut a rectangle in this tube - a hole for cartridges (focusing on the figure below).

We cut out a rectangular piece of paper and attach it to the barrel - it will close the hole on the receiver cover.

We carefully fix the barrel on the frame with adhesive tape, leaving a small space between them so that the receiver mount can move freely.

1. Gate.

We fold the A4 sheet of paper five times, seal the edges with adhesive tape and make a kind of roof of the frame itself, corresponding in size to the length of the trunk.

We place a paper shutter over the barrel and move it back, mark with a pencil the place where the hole is near the barrel, and do the same in the shutter. This hole will serve to eject bullets.

To keep the bolt near the barrel, you need to attach a strip of thin paper from the bottom of the front edge of the bolt. Then we put the shutter on the barrel, move it back so that it merges tightly with the frame, and under it we fix a strip of paper, approximately 3 cm from the rear edge.

These strips of paper will securely hold the shutter. The gun is loaded at the moment the shutter is pulled back and forth.

1. Paper magazine for a pistol.

We turn a piece of paper into a tube, make a rectangle out of it, approximately the diameter of the handle, so that it passes there and does not fall out.

The weapon is ready for toy combat!

You will learn how to make another interesting sample of a shooting pistol at home by watching the following video clip:

To make a gun with only paper and stationery at hand, no special skills are required. All you need is a desire and some free time!

Hello to all art lovers paper weapon! Today we want to offer you to glue the legendary pistol Colt 1911 paper. We warn you right away that the assembly of the pistol model is complicated and it may take you several days to glue it together.

The Colt 1911 is a world-famous 45 caliber pistol manufactured by gunslinger John Browning in 1911. Due to its good rate of fire and accuracy, this pistol was in service with the US military for 74 years. You can read a more detailed history of this pistol on the pages of the Free Encyclopedia - Wikipedia.

We glue the gun out of paper

In order to make a Colt 1911 out of paper, you will need the following:

1. Print on a thin cardboard scheme for scanning the details of a paper model of a pistol.
2. Cut out all the details with sharp scissors.
3. Glue all the details together.

As you can see, everything is simple!

• Photo paper can be used for printing. It is dense and the gun from it will turn out not so fragile than from ordinary thin paper. Alternatively, you can stick the cut out parts on cardboard. Just keep in mind that when smeared with glue, thin paper wrinkles and the appearance becomes useless.
• You can also use Whatman sheets for printing. You can also transfer the diagram of the cut-out part of the pistol onto a sheet of drawing paper several times, and then cut them out and glue them together.
• For cutting, use sharp scissors or a clerical knife, or even better a scalpel.

Be sure to use old magazines when using the knife so as not to spoil the surface of the table.

• To make the various curves of the parts neat and even, use a ruler and a non-writing ballpoint pen. Draw along the detail scheme under the ruler with a pen, and then bend.
• To glue the parts, use a fresh glue stick or the usual types of liquid paper adhesives (silicate and PVA). Use a brush to apply liquid adhesive to the surface to be glued. This will make the paper pistol model more accurate and beautiful.

Diagrams of parts of a Colt 1911 pistol made of paper

Schemes for the development of a Colt 1911 pistol from paper 1

Schemes for the development of a Colt 1911 pistol from paper 2

Schemes for the development of a Colt 1911 pistol from paper 3

Schemes for the development of a Colt 1911 pistol from paper 4

It's no secret that boys love to play war games, they always have soldiers, cars and, of course, weapons.

But the same gun can be easily made out of paper. Here is an example of the easiest way to make a gun out of paper using the origami technique, without glue and scissors.

Fold a piece of paper into stripes.

Bend as shown in the picture.

The finished weapon looks like the photo below.

Materials needed to create a paper gun

In order to learn how to make a gun out of paper, follow the simple instructions described below.

You will need:

• scotch;
• scissors;
• A4 paper.

Instructions for making a gun out of paper

When everything is prepared, you can proceed. How to make a hunting rifle out of paper? Let's look into this in more detail.

1. Roll the sheet into a tube, fix it with tape so that it does not fall apart. Make another tube of the same diameter.
2. Roll the sheet into a tube with a slightly larger diameter so that the previous tubes can fit into this one.
3. Sheets twisted into tubes with a smaller size, insert from both sides into the latter. Secure with tape.
4. Make another such long tube, consisting of three sheets. Trim so that the length is the same, and glue them together.
5. Now we need to make an example. To do this, take two sheets of paper, cut out the same oblong trapezoid from them. Tape well with tape on all sides. Insert and glue the butt between the tubes.
6. Tape the stock with a new flat sheet of paper to make it look nice.
7. Roll two sheets into two separate thin strips. Form a circle from one. And fold the other in half and put it on the circle so that three centimeters are in the middle of the circle.
8. Insert this design from below under the rifle. As you guessed, this will be the trigger.
9. You can also make a sight by twisting another strip into a circle and gluing it from the top.

That's all. Now you know how to make a gun out of paper. It's easy and fast. And the boys will be interested to see the process of making weapons.

And here is another interesting scheme, thanks to which you can also make a gun.

Paper gun that shoots

But many will rightly note that a gun that does not shoot is a very dubious and uninteresting toy.

Therefore, below is an instruction on how to make a gun out of paper that shoots. And this task will be a little more difficult, but playing with such a gun will be much more interesting.

You will need:

• colored paper of your choice;
• White paper;
• scotch;
• hot glue.

Let's make paper guns together

See how to make a gun out of paper.

Load bullets into the top hole and pull the trigger. Here is such a toy. Well, here we figured out how to make a gun with your own hands out of paper.

There are many different schemes and ways to build paper weapons, and even one that shoots. Start with the simple ideas suggested by origami and move on to more complex methods. Thus, you can collect a whole arsenal at home and play with a large company until you get bored.

And such activities are also useful for children, because they develop hand motor skills and accuracy.